Its Here! Quick picks before I try to install., Blitz Options

[Guest_Jason_*]

Well at 10:40 this morning a truck pulls up and walks to the door and says "Jason?". I'm like "yes??".. being really confused. I was expecting it to come like UPS or not till later this afternoon. So the guy says "I have a car piece for you.", so knowing me I started freaking out, ran upstairs, grabbed my hat, hoody, sweat pants... i'm going to try to install this SOB. Well I don't see any screw holes or anything that stands out on how to Install it, and i've never taken our Bumper off before, so if anyone has any suggestions or ideas on how to do this, please help me.

Here are some pics straight out of the box. The Blitz itself is Fiberglass btw.. Oh and its snowing outside - so I dont know what my cold tolerance is.






This post has been edited by Jason: Feb 10, 2003 - 11:52 AM

[Guest_Matthew_*]

I would say either take it to a body shop OR make screwholes yourself and get some bondo to cover up the holes or some fiberglass filler.

[98celica3]

first off, that bumper is bad ass! my brother and i put his front bumper on his integra. if i were you i would just take the stock front off, and then line up the holes and drill new holes in the blitz bumper. i hope it fits good, i think i'm gonna get the whole kit this spring!
adam

[Guest_Jason_*]

It looks like it fits great, I lined everything up nicely. The only thing that stuns me is on the Fenders of the Blitz Kit wraps around, we have to cut our fenders in half, if you see what i'm saying. The sides of our front bumper go straight down, while the Blitz wraps around.

For those of you that have PM'd me about not being able to see the pictures, the Pictures are on Image Station which is currently down for a few.

QUOTE

IMPORTANT NOTICE FROM IMAGESTATION Sony ImageStation is currently unavailable for use. The site downtime is only temporary and is part of our ongoing efforts to improve the ImageStation service for your better enjoyment. We apologize for any inconvenience this may cause you. Thank you for your continued support, The ImageStation Team

This post has been edited by Jason: Feb 10, 2003 - 1:23 PM

[0Re0]

SWEET!!!!

[boosted_K2]

wow, im impressed, yea about wrapping around the fenders, the combat kit does the same... havent made up my mind yet as to how im going to deal with it. the blitz kit looks great! the only thing i dont like too much is how inbetween the headlights it slopes... very nice though!

[celicaBEst]

sweeeeet, i can't wait to see it on the car.

[0Re0]

QUOTE (K2_Celica @ Feb 10, 2003 - 1:56 PM)

wow, im impressed, yea about wrapping around the fenders, the combat kit does the same... havent made up my mind yet as to how im going to deal with it. the blitz kit looks great! the only thing i dont like too much is how inbetween the headlights it slopes... very nice though!

Are the lip and the top of the combat kit are two seprate pcs? I mean attaching it seprately!? Anywayz, the TRD kit also does the same but its a one pc kit.

[boosted_K2]

QUOTE (0Re0 @ Feb 10, 2003 - 4:14 PM)

QUOTE (K2_Celica @ Feb 10, 2003 - 1:56 PM) wow, im impressed, yea about wrapping around the fenders, the combat kit does the same... havent made up my mind yet as to how im going to deal with it. the blitz kit looks great! the only thing i dont like too much is how inbetween the headlights it slopes... very nice though! Are the lip and the top of the combat kit are two seprate pcs? I mean attaching it seprately!? Anywayz, the TRD kit also does the same but its a one pc kit.

not 100% sure on what your asking but ill try answering it the best i understand it. so if i dont answer/answer the wrong question forgive me

combat is all 1 piece like what you see there with the blitz. were you asking if it was 2 pieces similar to the invader? thats the jist i got through what you asked... hope i answered the right question

[celicakid84]

cant you just overlap the fenders and then mold the kit into them. The rear of the invader overlaps the quarter panel and thats what i did when i installed mine.

[0Re0]

QUOTE (K2_Celica @ Feb 10, 2003 - 2:38 PM)

QUOTE (0Re0 @ Feb 10, 2003 - 4:14 PM) QUOTE (K2_Celica @ Feb 10, 2003 - 1:56 PM) wow, im impressed, yea about wrapping around the fenders, the combat kit does the same... havent made up my mind yet as to how im going to deal with it. the blitz kit looks great! the only thing i dont like too much is how inbetween the headlights it slopes... very nice though! Are the lip and the top of the combat kit are two seprate pcs? I mean attaching it seprately!? Anywayz, the TRD kit also does the same but its a one pc kit. not 100% sure on what your asking but ill try answering it the best i understand it. so if i dont answer/answer the wrong question forgive me combat is all 1 piece like what you see there with the blitz. were you asking if it was 2 pieces similar to the invader? thats the jist i got through what you asked... hope i answered the right question

Is the lip removable? or its connected?

[0Re0]

looks pretty much similar to this kit

[0Re0]

[all4sho94st]

cant wait for it to be put on your car man.

[0Re0]

QUOTE (all4sho94st @ Feb 10, 2003 - 7:07 PM)

cant wait for it to be put on your car man.

werd

[boosted_K2]

wow this is nice 6g celicas just got 3 new kits within the last month... now if we get a lil more performance support were all set!

[FallenHero]

three new? Also, I wonder how a GT-4 hood would look with the dip in that bumper?

[Coomer]

That looks awesome man! I can't wait to see how it looks on your car!

How much did the front bumper cost ya with shipping?

[3TST]

WOW! AWESOME.
How much and from where?

[idriveatruckWTF]

QUOTE (0Re0 @ Feb 10, 2003 - 6:59 PM)

got any links to the site where that bumper on the right is available? i haven't seen that before and it's not as played out as the blitz kit.

[NEVERSTOP]

back to the original ?.. there should be small little circles on the sides of the kit where you wont see it once its mounted.. once you have off your stock front airdamn you will see where its mounted the circles on your blitz AD should be in the same locations other wise you are going to have to put the Blitz AD onto the car with out mountin in.. it should just sit on the car... just dont drive it! newayz once you have it sitting on there use a sharpe marker and make marks where the stock mountin points are and then use a small drill bit to make holes in your blitz AD then try and use the stock mountin hardware to install the AD but you will probably have to go to lowes or some other hardware store and buy small bolts and nuts to install it. If you have ne ?'s ask me as I have put on a buncha front AD and know a few tricks to make it eaiser

[No0bOne]

Your bumper doesn't look exactly like the blitz bumper...

[95STCelica]

get it on yet?

[Inferno]

Go to:
http://www.carmate.com.au/

Then you need to click on Body Kits>>Toyota(You have to hold your mouse over the cars to get their make. Then you must follow it down to Toyota. Their in alphabetical order.)>>Celica. They have some nice kits.
Man, the spoiler on the yellow Celica -- 'Type AH' is made hot.

Also...
Extreme Dimensions already has it up. http://www.extremedimensions.com/shopexd.asp?id=3393

This post has been edited by Inferno: Feb 17, 2003 - 10:02 PM