![]() |
![]() ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Sep 30, '02 From NS Can Currently Offline Reputation: 0 (0%) ![]() |
OK so I'm about to do my alarm and am lazy,,, any one know if our Parking lights, door locks, interrior lights are positive or negative triggered.. THANKS the help will be GREATLY appreciated...
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Dec 19, '02 From West of Atlanta Currently Offline Reputation: 1 (100%) ![]() |
If I remember right they are all negative trigger.
|
![]() |
|
![]() Enthusiast ![]() Joined Sep 30, '02 From NS Can Currently Offline Reputation: 0 (0%) ![]() |
OK got everything up and running excaept the interior lights,, ahhKK tried eveything I could think but the won't come on ... any one got any ideas??
|
![]() |
|
Enthusiast ![]() Joined Oct 31, '02 From grants pass oregon Currently Offline Reputation: 8 (100%) ![]() |
i ran a wire inside the fender and spliced into the sidemarker light. i was to lazy to find the right wire under the dash
|
![]() |
|
![]() Enthusiast ![]() Joined Sep 30, '02 From NS Can Currently Offline Reputation: 0 (0%) ![]() |
that would work for the marker lights,, got them done, green wire behind dash dimmer,, found the red white wire on kick pannel for door switch,, just need to get domes to come on when shut of alarm,,
![]() |
![]() |
|
![]() Administrator ![]() ![]() ![]() ![]() ![]() Joined Aug 23, '02 From Seattle, WA Currently Offline Reputation: 14 (100%) ![]() |
I got illuminated entry to work on my car just fine. The door sensors are negative triggered, and I had to use a relay to get mine to work. Did you use a relay, or just try tapping into the wire directly?
Here's a wiring diagram of what you need to do(from http://www.the12volt.com - Lots of great info there): ![]() If that doesn't work, maybe you've got the wrong wire. Post again if it doesn't work and I'll take pics of the wire and stuff that you need to tap into. ![]() -------------------- New Toyota project coming soon...
|
![]() |
|
![]() Enthusiast ![]() Joined Sep 30, '02 From NS Can Currently Offline Reputation: 0 (0%) ![]() |
I knew YOU would have the answer... but only one prob.. my alarm is "sposed" to be able to do it on it's own.... ahh well I gots relays,, try it tomorow after work... THANKS
OH and the brown wire in the diagram that would be the red/white kick pannel wire right?? This post has been edited by t96f: Mar 5, 2003 - 11:50 PM |
![]() |
|
||
![]() Administrator ![]() ![]() ![]() ![]() ![]() Joined Aug 23, '02 From Seattle, WA Currently Offline Reputation: 14 (100%) ![]() |
Exactly. Good luck and let us know how it goes. ![]() -------------------- New Toyota project coming soon...
|
||
![]() |
|
![]() Enthusiast ![]() Joined Sep 30, '02 From NS Can Currently Offline Reputation: 0 (0%) ![]() |
OK now I done ****ed up BAAAD,, long story short I think I burnt out the diode for the interior lights on the drivers side DOOH!! I cut the red/white wire after and have power on both sides,, any idea whare the diode is?? HEEEELLLPPPPPP!!
|
![]() |
|
||
![]() Administrator ![]() ![]() ![]() ![]() ![]() Joined Aug 23, '02 From Seattle, WA Currently Offline Reputation: 14 (100%) ![]() |
I'm not sure where the diode is at. What exactly happened? -------------------- New Toyota project coming soon...
|
||
![]() |
|
![]() Enthusiast ![]() Joined Sep 30, '02 From NS Can Currently Offline Reputation: 0 (0%) ![]() |
Got it on 12volt to,, here ya go,, http://www.the12volt.com/installbay/forum_...?TID=10559&PN=1
|
![]() ![]() |
Lo-Fi Version | Time is now: July 27th, 2025 - 5:15 AM |