GB for cross drilled/ slotted rotors, $90 a pair if we get 10+ Options

[1bwilson]

I was wandering if there was ne intrest in this group buy? These are Bradi rotors. If we get 10+ they will be 90 a pair. This is the price for the fronts and thesame for the backs. The rotors will fit st's and gt's alike. I would like to get this off the ground and finnished by Augest 15th so only post if your a deffinate or have a question, please no maybe's.

thanks
-Bryan-

List (for sure):
1bwlison (front, back: slotted)
boibleu22 (Front, back : Cross drilled & slotted)
Jussimple ( front, rear : cross drilled & slotted )
forkee ( front: slotted & cross drilled)
98celica3 (front, back: slotted & drilled)
PdiddyGT (front & back: slotted & drilled)
MadLion90 (front: CD/slotted)
AudioFreak (front: slotted)
coustoe (front : Slotted & cross drilled)



This post has been edited by 1bwilson: Apr 16, 2003 - 12:15 AM

[boibleu22]

im very interested. now i gotta get off that GB over at celica.net

-alex

[Benevolence]

If I can't turn my rotors and I have to buy new ones Im interested, so in a week Ill let you know officially.

[Jussimple]

I'll be in there like swim wear. Keep us posted.

[Neipas09]

So is it $90 for just the fronts?
Cause i need front & back.

[presure2]

hey bryan i hate to bombard ya with ??'s but will these be available in just slottled? and can we have them plated to prevent rust?
thanks
manny

[forkee]

wow thats a lot cheaper than the one on celica.net. any pics?

im in

[stelica85]

Thats not bad for the front but i would have to buy the front and back, I could go to ebay and get them just as cheap. ( but its EBAY)

[ghostdog]

I'm in @ 90 USD for slotted front rotors

List (for sure):
1bwlison
boibleu22
Jussimple
forkee
gh0st d0g

List (maybe):
Benevolence
Neipas09
presure2
stelica85

[98celica3]

anybody got a pic? i'm interested if they are nice.
adam

[nik]

Ya show me a pic, if i like it I'm in

[presure2]

pics of the rotors are in this thread:
pic

[forkee]

those are the same ones? so its both drilled and slotted.....cool....

[95STCelica]

Hahh you linked to my thread

I think they only come cross drilled and slotted -- presure2..

got them a few days ago..man they are nice..i'll post more pics when i install them on my car..its a shame you didn't tell me about this a few days ago..i paid around $120 shipped



Here's the pic so you don't have to go looking around for pics

[presure2]

thanks for putting the pics up 95st...much easier..lol

[The_Argon]

All these group buys... I wish I was in the US...

How much do you think shipping would be to Australia???

[No0bOne]

I might be interested...need more information

[boosted_K2]

put me down on the maybe list, i will know by monday as i am going to be resurfacing my existing rotors and replacing my brake pads, if my rotors are FUBAR from excessive wear im in on this

[1bwilson]

QUOTE (Neipas09 @ Mar 21, 2003 - 8:09 AM)

So is it $90 for just the fronts? Cause i need front & back.

90 per set that is 90 for the fronts and then another 90 for the back.

I just emailed them about the rust free coating along with the possibility if getting the option of CD, slotted< or both. Brian at drift speed is the man I'm dealing with if ne of you were to call or email them. I should have the answers in the morning or so. Thanks for all the quick replys.

-Bryan-

[ashleyzredcelica]

Sweet...yea when you get the answer to either cross drilled or slotted or both be sure to reply. I will probably go in on it. Won't know till the 31st though/

[Neipas09]

I'm a definate as long as they are slotted and drilled, and i can get some kind of break on shipping since i'll be ordering 2 sets and want them shipped together.

[1bwilson]

Neipas, Ijust emailed him about the shipping but that is out of my hands if I can't get it down. I will have an idea of the costs tho.

This is the list thus far. If anyone is listed wrong or is not listed please cut and paste yourself on or off in a new reply.

-Bryan-

List (for sure):
1bwlison
boibleu22
Jussimple
forkee
gh0st d0g

List (maybe):
Benevolence
Neipas09
presure2
stelica85
98celica3
nik
No0bOne
k2 celica
ashleyzredcelica

[Coomer]

I'd be interested, but I'm trying to save my money for a swap during the summer, so I guess I'll have to pass this one up.

Moved to Buying/Selling

[1bwilson]

Rotors can be done as follows: Cross drilled , slotted , Both. I asked about shipping and they said sa an example 4 rotors should be about $35.

-Bryan-

[presure2]

hey bryan any word on plating?

[98celica3]

i'm in for front and back slotted and drilled. If they are the same price.
adam

[1bwilson]

QUOTE (presure2 @ Mar 23, 2003 - 6:46 AM)

hey bryan any word on plating?

No plating. All you have to do is paint them b4 you install them and you'll be fine.

Fronts are the same price as the backs.

-Bryan-

List (for sure):
1bwlison (front, back: slotted)
boibleu22
Jussimple
forkee
gh0st d0g
98celica3 (front, back: slotted & drilled)

List (maybe):
Benevolence
Neipas09
presure2
stelica85
nik
No0bOne
k2 celica
ashleyzredcelica

This post has been edited by 1bwilson: Mar 23, 2003 - 11:04 PM

[presure2]

sorry im out

[Jeremy1210]

what does the plating do?

[94celicaguy]

count me in!!!!

[boosted_K2]

looks like im going to pass too, i changed my brakepads the other day and all the braking problems stopped and my rotors are lookin pretty good. thanks anyways!!

[PdiddyGT]

Count me in!!! When can we get em soon i hope what would you paint them with that would not rub off?

[1bwilson]

Sorry to hear aboput that pressure and K2. Maybe next time .

Plating is away of rust proofing. I think they use zink but I'm not sure. You can paint them with any kind of rustolium (sp?) paint. The paint will rub off where the pad meets the surface of the rotor but that is a given. 2 more and we can place the order. Please state how you would like your rotors set up and what you need (ex. fronts and backs slotted fronts and cross drilled backs)

New list

List (for sure):
1bwlison (front, back: slotted)
boibleu22
Jussimple
forkee ( front: slotted & cross drilled)
gh0st d0g (front: slotted)
98celica3 (front, back: slotted & drilled)
PdiddyGT
94celicaguy

List (maybe):
Benevolence
Neipas09
stelica85
nik
No0bOne
ashleyzredcelica
zoom

This post has been edited by 1bwilson: Mar 26, 2003 - 2:40 AM

[Zoom]

I'm pretty interested but I got some questions I figure you as an expert can answer;) :

- I just replaced my front rotors with stocks, but my backs are starting to go. Is it going to be wierd with slotted/drilled rotors just in the back?
- Is the price with shipping or without (was a little confused with all the response posts).
- How much is the paint going to cost me would you say.
- Any real advantages between drilled and slotted?

[1bwilson]

Zoom-
i think its up to you if it looks wierd or not. If it were me I would get both neway.

shipping is not included.

$2.95.....I don't know! Go to Home Depot and look.

From what I have learned both help with the cooling of your brakes. I perfer slotted B/C they tend to be forged into the rotor as the cross drills are drilled into the rotor after the fact (this may have an effect to the strenth of the rotor)

In?

-Bryan-

[Zoom]

Sht man I gotta think about it I know you said no maybe's, just put put me as maybe, 1-2 days. I'll know by Thursday.

[1bwilson]

QUOTE (Zoom @ Mar 25, 2003 - 5:16 PM)

Sht man I gotta think about it I know you said no maybe's, just put put me as maybe, 1-2 days. I'll know by Thursday.

K

-Bryan-

[forkee]

<---slotted and cross drilled, just the front (i have an ST )

[1bwilson]

I am going to keep a updated list on the top of the first page.

-Bryan-

[PdiddyGT]

I want Front and back Drilled and slotted. Tell me where to send the cash.

[1bwilson]

QUOTE (PdiddyGT @ Mar 26, 2003 - 3:15 PM)

I want Front and back Drilled and slotted. Tell me where to send the cash.

I will post payment info when we hit 10 people.

-Bryan-

Pg 3 own3d

This post has been edited by 1bwilson: Mar 26, 2003 - 11:02 PM

[AudioFreak]

Count me in for a front set of slotted.

[1bwilson]

-Bryan-

[Neipas09]

Hmmm.....

Save for rims and tires OR cross drilled rotors???

I keep seeing an auction on ebay for a set of front and rear slotted/drilled rotors for $180+shipping, which is the exact same i would have to pay on here, so take me as a no. Not really a GB price if i can get them for the same price you all are payin.

Need proof...
(Ebay Auction For Rotors)

[Benevolence]

QUOTE (Neipas09 @ Mar 27, 2003 - 1:42 AM)

Hmmm..... Save for rims and tires OR cross drilled rotors??? I keep seeing an auction on ebay for a set of front and rear slotted/drilled rotors for $180+shipping, which is the exact same i would have to pay on here, so take me as a no. Not really a GB price if i can get them for the same price you all are payin. Need proof... (Ebay Auction For Rotors)

yeah I saw those also but I don't trust that brand.

[Zoom]

hey Bryan, I saw forkees post saying something about front only because 's got a ST. The Back rotors don't fit on STs?

[Guest_Matthew_*]

i can answer that....no

you do not have disk brakes in the back... you have drums. rotors are the things that the brake pads press against to slow the car down..

[1bwilson]

QUOTE (igotta5S-FEturbo @ Mar 27, 2003 - 7:11 PM)

i can answer that....no you do not have disk brakes in the back... you have drums. rotors are the things that the brake pads press against to slow the car down..

Ditto

-Bryan-

[Jeremy1210]

but if you bought them for the back, then wouldn't you save money to do the drum to disk swap??

[1bwilson]

QUOTE (Jeremy1210 @ Mar 27, 2003 - 11:08 PM)

but if you bought them for the back, then wouldn't you save money to do the drum to disk swap??

yes

-Bryan-

[Zoom]

This money that's being taken away from my rims/tires buy soon so, I guess I'm out for this one sorry

[1bwilson]

Is this it?

-Bryan-

[No0bOne]

1bwilson - remove me from the maybe list. Thanks you.

[ghostdog]

Sorry Bryan, I'm out too. I'd really like a set, but I have other priorities right now. Money is tight, and paintjobs don't come cheap.

[coustoe]

Hey, I wanna get the fronts, I guess i would need extra parts to convert my rear drums. Any know where i can get the parts cheap? I thought someone was doing a kit for the conversion.

[1bwilson]

QUOTE (coustoe @ Apr 2, 2003 - 1:26 PM)

Hey, I wanna get the fronts, I guess i would need extra parts to convert my rear drums. Any know where i can get the parts cheap? I thought someone was doing a kit for the conversion.

There is a guy over at celica.net parting out his 6th gen gt. Name is mike moris, look in the buying and selling forum and shoot him an email (he responds quickly) about his brakes.

I will up date the list and add you for just the fronts so if you decide to get the backs you need to PM me. BTW what do you want? Slotted, Cross drilled or both?

-Bryan-

[coustoe]

both, hey since i got you replying to my emails, know if anyone is selling or a good place for some koni shocks

This post has been edited by coustoe: Apr 4, 2003 - 4:13 PM

[coustoe]

So anyone know the diff between this rotor group buy and the one on celica.net The ones on celica net are actually cheapr by bout $10 for $70

[1bwilson]

QUOTE (coustoe @ Apr 3, 2003 - 3:58 PM)

So anyone know the diff between this rotor group buy and the one on celica.net The ones on celica net are actually cheapr by bout $10 for $70

I think thats 70 each but i'm not 100% sure.

-Bryan-

[coustoe]

thanks, yeah its for two of the kvr rotors, definetly im down for 1 set and possibly 2 if that helps with the overall count.

[Jussimple]

I've been out of the loop, been working on the car and stuff. Where does the group buy stand and has anyone sent they're money in. If its ready to go then when and how is the loot exchanging hands. Paypal is my method of choice. Oh and I'm in for cross drilled and slotted for the front only.

This post has been edited by Jussimple: Apr 5, 2003 - 12:32 PM

[boibleu22]

yeah, im still waiting on the update on this...

-alex

[coustoe]

this will be cool, good bye old rusted drum brakes . just need some konis and i'll be driving my celica all over this summer. Someone wanna sell me some konis for 400-500

This post has been edited by coustoe: Apr 7, 2003 - 2:04 PM

[1bwilson]

coustoe, boibleu22 , Jussimple. I need all 3 of you to decide on what you want. coustoe, I know you want fronts maybe backs i'll check with you at the last second for your final decision. What I need is you guys to tell me what sets you want ( fronts, Backs) ( Slotted, CD, Both) as soon as I get your info I will email the company and get the final tally.

-Bryan-

[coustoe]

put me down for slotted and crossed drilled.

[1bwilson]

.
.
.
.
.
.
.
.
.
.
.
.
Bump

-Bryan-

[Jussimple]

Front/rear, CD/slotted and check if they'll coat them. I'm doing the rear conversion and these will be the bread and butter. Let me know.

[1bwilson]

They do not coat. I will up date you in I hope thats ok with you.

-Bryan-

[boibleu22]

gimme front and back, crossdrilled and slotted.

-alex

[coustoe]

wilson, dont we have 10 people now? or at least request for a set of 10?

[1bwilson]

QUOTE (coustoe @ Apr 10, 2003 - 7:21 PM)

wilson, dont we have 10 people now? or at least request for a set of 10?

Yes. We should have enought sets to do this. I PM'ed 94celicaguy today about what he wants. I'll give him a day or so and then get this thing off the ground. If any of you know him or see him anywhere please tell him to check this post for the updates. I'll give him till saturday night to get back to me and them I will send the email out with the total # of orders I have. Cool? I am trying to be as fair as possible here and don't want to hurt anybodys feelings if they get left out.

-Bryan-

[MadLion90]

Go figure, I don't check this site for a while and i start missing out on stuff. Oh well. I saw that you mentioned Sat as the last day but no-one's posted since Thurs so I was wondering if my opportunity on this has passed.

If I can still get in then i'd def be in for front cd/slotted. If not then don't worry about it.

--Mike--

[1bwilson]

Your in. 94guy....is out. The GB is now closed ne one elseintrested in the rotors can email them for another GB, I will post their addy later. Sit tight guys i get the final lally and update this very soon.

-Bryan-

[1bwilson]

Everyone please email brian here [EMAIL]brian@driftspeed.com [/EMAIL] he is the on one that is running the GB. Tell him you are with the celica GB and what and how manny rotors you want. Also include your addy for him to ship. i want to start a done list now.

-Bryan-

Done:
1bwilson
boibleu22
Jussimple
AudioFreak
MadLion90

This post has been edited by 1bwilson: Apr 18, 2003 - 1:52 AM

[boibleu22]

done

[1bwilson]

QUOTE (boibleu22 @ Apr 16, 2003 - 9:49 PM)

done

wow that was faster than i could get out all the emails. Thanks

-Bryan-

[boibleu22]

werd

[PdiddyGT]

Im out cause i didn't get my tax return back!!!!! That sucks soory guys

[AudioFreak]

done

[Jussimple]

I emailed him with what I wanted, now what? Is he going to email back with what I need to do? Kind of confused. How do we finalize the buy Bryan?

[1bwilson]

You all will email him and he will get back to you with the total.

-Bryan-

[MadLion90]

Hey Bryan, thanks for letting me get in on this gb last minute. That was really cool. I just emailed the dude for them. Thanks again

--Mike--

[hioctane]

Hey will getting these rotors cure my brake's annoying squeeky noise??

[1bwilson]

I sure as hell hope so. I have the same problem

-Bryan-

[1bwilson]

Everyone when you email Drift speed please include your sn. He has the list and will be checking you all off as you reply. Sorry for those who have done so already.

-Bryan-

[Jussimple]

Ya, I emailed him again and gave him my "AKA". I forgot that my email stamps my real name, but I change that. Damned if microsoft express doesn't hide that option under tons of sub menus.

[MadLion90]

...BUMP...

So what's going on with this???? Any info??

--Mike--

[1bwilson]

I havent recived a reply from the company as to wether or not he has everyone so i will send him an email now...

-Bryan-

[Drolius]

Hey 1bwilson, I am definitely interested in those rotors. You can put me on the "maybe" list, because I have two questions: Are they zinc or something coated for protection? and just to make sure, these wiull fit on 96 GT Conv.? Once I know the answers I can give you a yes or no for sure. Thank you very much!

-Eddie-

This post has been edited by Drolius: May 27, 2003 - 7:23 PM

[Drolius]

I just realized that it has already been a month since you've had this GB. I needed them coated anyways, so I guess its a no go for me. Thanks anyways.

[forkee]

nm guys, i switched over to the GB over at celica.net

[1bwilson]

QUOTE (forkee @ May 27, 2003 - 8:25 PM)

nm guys, i switched over to the GB over at celica.net

NP I cant get ahold of the guy about this GB.

-Bryan-