FS: '95 Celica Parts - ST Being Parted Out Options

[Coomer]

After looking closer over the '95 Celica ST that I just bought, it does indeed have frame damage, and isn't worth fixing. So I'm parting it out.

What is taken so far:
Both Front Seats
Climate Control Unit
Gauge Cluster Cover(I think)
Front Upper Strut Mounts and Spring Perches
Interior Trim Around Shifter
Both Round Toyota Logos
Passenger Side Low Beam Headlight

Here are some photos.

























Now, if you're interested in anything, post in this thread(posting a price you think is fair helps too.) The easiest way for me to organize who wants what is to have it all in this thread, so I'd prefer if you posted here rather than PMing IMing or emailing me.

So let me know what you want.

Thanks,
Christian Coomer

Attached image(s)

 

[forkee]

ill give u $4 for the front 2 windshield nozzle sprayers

also $10 for the floor mats IF they are the stock ones and in decent shape, meaning a throw in the laundry wash and/or carpet cleaner solution would revive it to like new.

[Coomer]

The mats aren't in that great of shape, and the squirters don't work that well...do you still want them?

[Consynx]

i am interested in all 4 headlights...
do they have damage?
if not, then can moisture get in them?
I'm looking for the cheapest set i can get a hold of, so i dont care if they aren't completely sealed

[25thcelica]

OMG mud flaps I need those. please coomer let me know how much you want for them please!


thanks
Fernando

[Coomer]

i am interested in all 4 headlights...
do they have damage?
if not, then can moisture get in them?
I'm looking for the cheapest set i can get a hold of, so i dont care if they aren't completely sealed
[right][snapback]226659[/snapback][/right]

These may be sold everyone. I'll post back on Tuesday when Consynx lets me know.

OMG mud flaps I need those. please coomer let me know how much you want for them please!


thanks
Fernando
[right][snapback]226661[/snapback][/right]

PM sent.

[creis]

I would like the driver side vent (with circle indent, I dont need the actual vent just the trim peace,) the upper center console peace (I dont need the clock, emg light switch or actual vents just the trim peace,) and the trunk light (driver side with switch)

how's #25-$30 sound.

[Coomer]

I would like the driver side vent (with circle indent, I dont need the actual vent just the trim peace,)  the upper center console peace (I dont need the clock, emg light switch or actual vents just the trim peace,) and the trunk light (driver side with switch)

how's #25-$30 sound.
[right][snapback]226669[/snapback][/right]

I'm still waiting to hear back from someone about the upper middle console piece, but the other two you can have. I'll let you know once I find out if I'm selling that upper middle console piece.

[rza619]

hmm how much for the pocket under the radio?

[Coomer]

hmm how much for the pocket under the radio?
[right][snapback]226675[/snapback][/right]

How's $20 shipped sound?

[creis]

upper middle console piece.

yeah i added that in last min because I dont really need it but mine is no in the best of shape since I took my wood trim off, is just the two other things that i really want, let me know though.

[FallenHero]

When you are virtually finished parting it out, let me know. I'd love to get the short block off of you for hella cheap... but shipping from washington (as I have discovered so many times before) SUCKS.

[amysmojo]

I might want that 3rd break light, remember how I messed mine up? Lol

[Coomer]

upper middle console piece.

yeah i added that in last min because I dont really need it but mine is no in the best of shape since I took my wood trim off, is just the two other things that i really want, let me know though.
[right][snapback]226678[/snapback][/right]

Yeah, you can have those two parts...how's $20 sound? I can meet you somewhere near Seattle too, because I'm up there a lot.

When you are virtually finished parting it out, let me know.  I'd love to get the short block off of you for hella cheap... but shipping from washington (as I have discovered so many times before) SUCKS.


[right][snapback]226686[/snapback][/right]

Alright, I'll let you know. The engine and tranny seem to be in very good shape. They have 114,000 miles on them, and the engine pulls like a healthy ST does. The tranny shifts smooth as well.

I might want that 3rd break light, remember how I messed mine up? Lol
[right][snapback]226687[/snapback][/right]

It's all yours if you want it.

[creis]

Yeah, you can have those two parts

$20 is fine, just tell me when your up here next and i'll meet you somewhere.

[hunter_D]

how much are the door panels? i need both sides i live in cali how much is shipping also? thanks,

[Coomer]

how much are the door panels? i need both sides i live in cali how much is shipping also? thanks,
[right][snapback]226733[/snapback][/right]

How does $50 plus shipping sound for both sides?

And creis, I'll pull those parts out and let you know when I'm going up to Seattle. It's possible that I might go next weekend, but I'm not sure.

[playr158]

steering wheel(with airbag) passenger side airbag
resonator....
and maybe the TB

and i might ask you for a pretty big part but i'll tty about that on im

This post has been edited by playr158: Dec 26, 2004 - 9:19 PM

[Jeremy1210]

I need the vent and the vent housing that are under the clock, also, how much for the spare? Oh yeah, how about the cigaretter lighter unit(the whole thing)

I am going to be gone for the next 3 days, so If you do quote me, I do want them and I'll get back to you when I get back

This post has been edited by Jeremy1210: Dec 26, 2004 - 9:38 PM

[sinner96ST]

first dibs on the spoiler, depending on price.

i'm tired of my 3 post, unless you'd like to make a trade or something.

oh, i may want the tire iron too. i lost mine in a road range incident.

This post has been edited by sinner96ST: Dec 26, 2004 - 10:13 PM

[Dickster223]

i want the ebrake handle the black part that sides off and the rubber thing that is around the ebrake hows 15 sound?

Richard

[ToYCeLi8]

Ill give you $350 for what evers left

J/K ill give you a call later and let you know what i might pick up. I know its 1st come 1st serve so dont hold anything for me yet.

David

[Tenchi]

I am interested in the driver's side high beam. Please let me know if it is available and what condition it's in (no leaks please!).

[Coomer]

steering wheel(with airbag) passenger side airbag
resonator....
and maybe the TB

and i might ask you for a pretty big part but i'll tty about that on im
[right][snapback]226762[/snapback][/right]

I may be able to get that stuff. Depends no how hard it all is to get out. Also, what do you mean by TB? Throttle body?

I need the vent and the vent housing that are under the clock, also, how much for the spare? Oh yeah, how about the cigaretter lighter unit(the whole thing)

I am going to be gone for the next 3 days, so If you do quote me, I do want them and I'll get back to you when I get back
[right][snapback]226769[/snapback][/right]

PM sent.

first dibs on the spoiler, depending on price.

i'm tired of my 3 post, unless you'd like to make a trade or something.

oh, i may want the tire iron too.  i lost mine in a road range incident. 
[right][snapback]226784[/snapback][/right]

PM sent.

i want the ebrake handle the black part that sides off and the rubber thing that is around the ebrake hows 15 sound?

Richard
[right][snapback]226816[/snapback][/right]

PM Sent.

Ill give you $350 for what evers left   

J/K ill give you a call later and let you know what i might pick up. I know its 1st come 1st serve so dont hold anything for me yet.

David
[right][snapback]226929[/snapback][/right]

Sounds good David. Give me a call...I'm curious to see how your car is doing as well.

I am interested in the driver's side high beam.  Please let me know if it is available and what condition it's in (no leaks please!).
[right][snapback]226943[/snapback][/right]

All four headlights are for sure sold to Consynx. He'll be sending payment for them on Tuesday.

[celicaboston1983]

can I get the passenger side fender inner panel. PM me

[Makaveddie]

Hey coom, let me know if those door panels are sold. I am interested in the passenger side...

[Coomer]

can I get the passenger side fender inner panel. PM me
[right][snapback]226986[/snapback][/right]

It's destroyed.

Hey coom, let me know if those door panels are sold. I am interested in the passenger side...
[right][snapback]226998[/snapback][/right]

I think they're sold. I just have to get the potential buyer a shipping quote and then they'll probably be sold for sure. If you really need one, I'll have another extra pair soon, but there's some glue still stuck on the upper part(Where the leather used to be.)

[Akuza]

coomer this is what i need:
whole dash panel
armrest
trunk lever next to the gas lever on the bottom of the driver seat
that brown plywood tire cover for the spare tire
shifter trim panel
driver side fender
your hatchback trunk lid (maybe not)
passenger side air vent

ill give u 200 for all those parts or i might buy the whole car (need a project car)
dont worry about shipping cuz ill drive down yakima and get it since i dont like waiting for shipping

[Akuza]

ok i just read that the trim around shifter is taken so u can cross that one out then

[Coomer]

coomer this is what i need:
whole dash panel
armrest
trunk lever next to the gas lever on the bottom of the driver seat
that brown plywood tire cover for the spare tire
shifter trim panel
driver side fender
your hatchback trunk lid (maybe not)
passenger side air vent

ill give u 200 for all those parts or i might buy the whole car (need a project car)
dont worry about shipping cuz ill drive down yakima and get it since i dont like waiting for shipping
[right][snapback]227013[/snapback][/right]

The shifter trim panel is spoken for(by me), and the driver side fender is trash(dented, rusted.)

But I'll give you everything else for $130. Where are you located?

[Akuza]

vancouver, canada
ok since the fender is screwed then ill just take the rest then
130 is good
umm im not really sure how to drive down there so maybe wedsday or thursday that sound good to you ?

[Coomer]

vancouver, canada
ok since the fender is screwed then ill just take the rest then
130 is good 
umm im not really sure how to drive down there so maybe wedsday or thursday that sound good to you ?
[right][snapback]227028[/snapback][/right]

Yeah, that would be fine. I'm not off of work until 5PM, but we could meet after that and grab the parts if that works for you. Coming from Vancouver I think you'd take I-5 until you hit I-90, then hop on I-90 East until you hit I-82, and then Yakima is right off I-82.

Edit, which seat do you need? I don't think I saw that earlier.

This post has been edited by Coomer: Dec 27, 2004 - 2:44 PM

[Akuza]

wanna meet me in seattle instead ?
cuz thats really far !!! i fear being lost

[Akuza]

no i didnt need the seat i needed the levers under the seat the gas and trunk levers
ps give me your msn much easier to communicate

[Coomer]

PM sent.

[Jdog1385]

if you still have the rear hatch lid/cover, ill definitely take it.

[Coomer]

if you still have the rear hatch lid/cover, ill definitely take it.
[right][snapback]227050[/snapback][/right]

That's something that you may want to find locally...it's pretty light, but it's so big that shipping would cost a lot I think. Not sure though.

[DamDirtyApes]

shipp[ing would be less than 30 on that ^ by fed ex... ( i think)

[Coomer]

shipp[ing would be less than 30 on that ^ by fed ex... ( i think)
[right][snapback]227079[/snapback][/right]

Well that would be good. PM sent.

[slipgun]

Hey Coomer im looking for the interior clock if you still have it! Thanks!

[Coomer]

Hey Coomer im looking for the interior clock if you still have it! Thanks!
[right][snapback]227163[/snapback][/right]

Yep, I've got it and you can have it. I'll send you a PM later tonight. I'm about to leave and don't have time now.

[speck102]

Hey, I am interested in both driver and passenger side airbags if you still have them. How about $200 shipped?

[playr158]

already buying those^^^^^i spoke for them back onpage 2
andyes coomer throttle body

This post has been edited by playr158: Dec 28, 2004 - 8:54 AM

[1900WattCelica]

How about both taillights for 40 bucks + shipping? Dude your doin alright for parting it out you will make a couple bucks doin this. I wouldda bought the rear view mirror off of you but I just ebayed it last week.

[st202gt]

how much is for the bumper trim piece..the whole piece that sit between the hood and bumper ..............asking $5.00

[forkee]

hey i could use the back window for the cf hatch when it comes in, how's the condition of it?? i guess ill need the trim too.

edit: is there damage to the front window too? cuz mine has a chip on it from a rock. so ill prolly need both the front and back

This post has been edited by forkee: Dec 28, 2004 - 11:03 AM

[Coomer]

Hey, I am interested in both driver and passenger side airbags if you still have them. How about $200 shipped?
[right][snapback]227245[/snapback][/right]

Maybe...I'm not sure if the airbags have even deployed or what. And then playr158 is interested as well.

already buying those^^^^^i spoke for them back onpage 2
andyes coomer throttle body
[right][snapback]227305[/snapback][/right]

I'll talk to you on AIM about this. First I gotta figure out if the airbags have deployed.

How about both taillights for 40 bucks + shipping?  Dude your doin alright for parting it out you will make a couple bucks doin this.  I wouldda bought the rear view mirror off of you but I just ebayed it last week.
[right][snapback]227313[/snapback][/right]

PM sent. There's lots of interest, but my Paypal account has only seen $10 so far and lots of people don't respond to the PMs that I send.

how much is for the bumper trim piece..the whole piece that sit between the hood and bumper ..............asking $5.00
[right][snapback]227326[/snapback][/right]

The black piece with the black rubber strip? Is that what you're talking about?

hey i could use the back window for the cf hatch when it comes in, how's the condition of it?? i guess ill need the trim too.

edit: is there damage to the front window too? cuz mine has a chip on it from a rock.    so ill prolly need both the front and back
[right][snapback]227332[/snapback][/right]

Akuza is buying the hatch(with glass) on Thursday. And the front window has a large crack all the way across the middle of it.

[95celgt]

do you have the harness plugs that connect to the lowbeam headlight bulbs?

[Coomer]

do you have the harness plugs that connect to the lowbeam headlight bulbs?
[right][snapback]227345[/snapback][/right]

Yes I do, but brand new ones can be purchased from your local Schucks, Autozone, Wal-Mart, etc.

[1900WattCelica]

PM sent. There's lots of interest, but my Paypal account has only seen $10 so far and lots of people don't respond to the PMs that I send.

Make that $75 Ha ha

[Coomer]

PM sent. There's lots of interest, but my Paypal account has only seen $10 so far and lots of people don't respond to the PMs that I send.

Make that $75 Ha ha
[right][snapback]227371[/snapback][/right]

Cool. Tail-lights are now sold guys.

[Consynx]

damn lucky...i've had my tail-lights forever now...

[urbandork]

Hey there Coomer this is what i need.

Hi beams
Driver side seat belt. (spool and the belt but not the part on the seat)
hatch cover. (if the two plastic tabs it pivots on are not borken like mine)
The crash/re-bar that is behind the bumper. (that should fit a 95 gt rite?)

Perhaps the foam behind the rear bumper and a crash/re-bar if theres one in the rear. As well as the toyota emblem on the front bumper if it can be taken off with out harm and is in good condition.

This post has been edited by urbandork: Dec 28, 2004 - 1:22 PM

[Coomer]

Hey there Coomer this is what i need.

Hi beams
Driver side seat belt. (spool and the belt but not the part on the seat)
hatch cover. (if the two plastic tabs it pivots on are not borken like mine)
The crash/re-bar that is behind the bumper. (that should fit a 95 gt rite?)

Perhaps the foam behind the rear bumper and a crash/re-bar if theres one in the rear. As well as the toyota emblem on the front bumper if it can be taken off with out harm and is in good condition.
[right][snapback]227375[/snapback][/right]

PM sent.

[XxAxnCelica95xX]

hey coomer do u hav the air vents on both side of the car...the one that is next to the doors...hmm i hope u know wat im talkin bout..and do u still hav the dooor switches holder...let me know alrite..thanks..i really in need ofi t...and do u still hav the low beams light...

[Coomer]

hey coomer do u hav the air vents on both side of the car...the one that is next to the doors...hmm i hope u know wat im talkin bout..and do u still hav the dooor switches holder...let me know alrite..thanks..i really in need ofi t...and do u still hav the low beams light...
[right][snapback]227439[/snapback][/right]

Sorry, but the car has no power options, and both vents along with both low beam headlights are in the process of being sold already.

[urbandork]

Just so we r on the same page this is what the crashbar im talking about looks like. It sits behind the bumper and infront of the radiator.

[XxAxnCelica95xX]

aww crap...thanks alot cooomer...wat else do u hav in there that is for grab..

[Coomer]

Just so we r on the same page this is what the crashbar im talking about looks like. It sits behind the bumper and infront of the radiator.
[right][snapback]227449[/snapback][/right]

Yep, that's the crashbar.

aww crap...thanks alot cooomer...wat else do u hav in there that is for grab..
[right][snapback]227450[/snapback][/right]

If you read through this post completely, you can get a pretty good idea of what's still available.

[XxAxnCelica95xX]

man everything i need u sold them all....aww thanks anyway cooomer for the quick reply

[bufferdan]

I need a exhaust manifold that isnt cracked?. How does that one look under the heat sheild? Pm me with a price if its good.

thanks,
Dan

[playr158]

oh coom i also need the wire from the HU to the antenna assembly its a big black one

[jojobombiest]

I need the front liscence plate screws and the silver holder thing, and it looks like theres a plastic thing on the front too. $5 plus shipping?

the reason i need it is because i got a ticket for no front liscence plate, so i need to get it back on and pay the ticket asap. thanks

This post has been edited by jojobombiest: Dec 29, 2004 - 6:49 AM

[playr158]

airbags and resonator...SOLD TO ME

[Coomer]

I need a exhaust manifold that isnt cracked?.  How does that one look under the heat sheild?  Pm me with a price if its good.

thanks,
Dan
[right][snapback]227594[/snapback][/right]

I can take a look at some point. Probably not tonight but possibly tomorrow.

oh coom i also need the wire from the HU to the antenna assembly its a big black one
[right][snapback]227612[/snapback][/right]

I should be able to get that out. I'm hoping to have the carpet and seats out tonight.

I need the front liscence plate screws and the silver holder thing, and it looks like theres a plastic thing on the front too.  $5 plus shipping? 

the reason i need it is because i got a ticket for no front liscence plate, so i need to get it back on and pay the ticket asap. thanks 
[right][snapback]227675[/snapback][/right]

I threw that stuff away. It was all bent and cracked and the bolts were rusted. Sorry man.

airbags and resonator...SOLD TO ME
[right][snapback]227709[/snapback][/right]

Yep, hopefully tonight I can pull them off of the car.

[thedevilmaycrie]

hey coomer you send out my parts ... and how much was shipping

-DMC

[Coomer]

hey coomer you send out my parts ... and how much was shipping

-DMC
[right][snapback]227725[/snapback][/right]

They're in my car right now and will be sent out in a couple hours on my lunch break.

[thedevilmaycrie]

snazzy

-DMC

[playr158]

snazzy????

[VAcelica]

is it possible for you to take a few suspension parts off for me...i kinda ran into an emergency and need them for my car. i'm looking for the spring seat and the upper insulators that lay between the actual spring and the suspension support( the part you can see from the engine bay) for all four corners, but i atleast need the front ones. i'll even pay extra if we can seal the deal and have a speedy shipment cause i'm going back to school in about a week.

[VAcelica]

heres a link with pics if you have any question on what they look like.

[Coomer]

is it possible for you to take a few suspension parts off for me...i kinda ran into an emergency and need them for my car. i'm looking for the spring seat and the upper insulators that lay between the actual spring and the suspension support( the part you can see from the engine bay) for all four corners, but i atleast need the front ones. i'll even pay extra if we can seal the deal and have a speedy shipment cause i'm going back to school in about a week.
[right][snapback]227999[/snapback][/right]

Sorry man, but I need the front upper spring perches for my car, plus I have to be able to roll this car around for a while longer anyway. I think Srplayer might have them though.

[celica_st95]

I give you $5.00 for this piece:



Mine is broke in one of the sides and don't bolt anymore

Let me know if yours is still in 1 piece.

Thanks

SC.

[Coomer]

I give you $5.00 for this piece:



Mine is broke in one of the sides and don't bolt anymore

Let me know if yours is still in 1 piece.

Thanks

SC.
[right][snapback]228187[/snapback][/right]

I think I'd rather keep the engine intact so I can sell the whole thing.

[brianforster]

coomer when your done with this i want a running total that you made off of parting this car out, i think its going to be pretty interesting

[SiN-CeLi]

How much for the trim piece thats above the shifter the one that goes around the stereo. Also is that little compartment under the stereo for sale if so how much, I would need the brackets that mount that to the stereo as well.

[playr158]

coomer i want the gauge cluster now too asap

[Akuza]

thanks coomer

going there sucked and i got harrassed at the boarder bringing the dash back
they thought it was stolen cuz thought they saw the VIN#

i was too stupid, so they dont know wtf im talking about so they just let me go

ps i need the cover for the fuse box near the trunk lever, under the dash which i took

[d3monc3lica]

selling the block?

[playr158]

you demon you need to state short or long so the rest of us know which one is being sold.....

and i'm buying airbags, resonator, and gauge cluster for 315 and then shipping so thats 35$ short of the car

[creis]

I still want the parts, just to remind you.

[1900WattCelica]

And you will know your package from any other package you might receive when you buy from coomer. I have never seen someone use duct tape for shipping.....AHAHAHA. Tails look real good man, thanks!

[BrianGT4]

I'm after the dash piece under the radio. is it still available? say 10 plus postage?

[Exile04]

does it still have the trunk platic piece and is it in good condition ill take it if it is and the trunk lid also if in good condition.

[Coomer]

does it still have the trunk platic piece and is it in good condition ill take it if it is and the trunk lid also if in good condition.
[right][snapback]236727[/snapback][/right]

Which plastic piece in the trunk? Also, the hatch is in good shape. Make me an offer on it.

[Exile04]

the plastic liner...that goes all the way around

[Coomer]

the plastic liner...that goes all the way around
[right][snapback]236776[/snapback][/right]

Well, that's three parts. I know that the passenger side panel isn't in good shape, but I can't remember about the others. Once I go look at them I'll post here again.

[redman5393]

coomer

this is what i need.. i need the hood the upper tie bar and perhaps the radiator... the front and rear bumper covers , front bumper foam , the driver side high beams and the driver side lights brackets.... im 17 and jsut was in acar accident and i needa get my car fixed cheap not from a dealer and i can do it myself.. so let me know how much you think all that would cost me


thanks rusty

[Consynx]

wow revival...you still got parts?

[dans_st]

I don't know if they are sold yet but I want the interior panels from the hatch(driver,pass. and rear-I don't need the trunk light) along with the upper cover and the trim pieces around the door handles if you have them still.
also the factory mounting brackets for the radio(no pocket)
and if you have them how much shipped to Texas zip code 79707

This post has been edited by dans_st: Sep 12, 2005 - 11:35 PM

[chicklover345]

hey coomer do you still have the power antenna rod with the plastic gear in there. i didnt see it in the posts. my plastic gear broke of like 6in now it wont go down unless i push it. will pay wut you want i hate making the price its awkward

here is the pic with it highlighted


This post has been edited by chicklover345: Sep 20, 2005 - 5:11 PM

[purplegt4]

how much for the center arm rest & cupholder? is it wrinkled? and how much for the passenger side door arm rest (whole thing) without speaker cover/w plastic piece where the manual window crank is.

[st202gt]

how much are the radiator support bar that is on top of the head light.

[97lestyousay]

:

This post has been edited by 97lestyousay: Apr 4, 2012 - 10:08 PM

[gas65]

Coomer

Does it still have the release lever for the hatch down by the gas door opener? I stepped on mine and broke the damn thing.

This post has been edited by gas65: Oct 5, 2005 - 11:39 AM

[gemStudio]

If the AC alluminum tubing is in good condition then I would like to buy it. I can pay over paypal too.

[yungazzdriver]

hey any fenders availiable and the front bumper cover? bumper corners?

[Coomer]

coomer

this is what i need.. i need the hood the upper tie bar and perhaps the radiator... the front and rear bumper covers , front bumper foam , the driver side high beams and the driver side lights brackets.... im 17 and jsut was in acar  accident and i needa get my car fixed cheap not from a dealer and i can do it myself.. so let me know how much you think all that would cost me


thanks rusty 
[right][snapback]333396[/snapback][/right]

Upper tie bar? Do you mean the upper bar that the top of the headlights mount to? I have the radiator and front and rear bumper covers, and front bumper foam. Make me an offer.

wow revival...you still got parts?
[right][snapback]333433[/snapback][/right]

Yep,
I still have a ton of parts.

hey coomer do you still have the power antenna rod with the plastic gear in there. i didnt see it in the posts. my plastic gear broke of like 6in now it wont go down unless i push it. will pay wut you want i hate making the price its awkward

here is the pic with it highlighted

[right][snapback]336592[/snapback][/right]

Nope, I don't have that.

how much for the center arm rest & cupholder? is it wrinkled? and how much for the passenger side door arm rest (whole thing) without speaker cover/w plastic piece where the manual window crank is.
[right][snapback]336606[/snapback][/right]

The armrest is in fair shape and isn't really wrinkled. Make me an offer on the door panel.

how much are the radiator support bar that is on top of the head light.
[right][snapback]336955[/snapback][/right]

It's slightly bent, but make me an offer...I can get you pics if you want.

Coomer

Does it still have the release lever for the hatch down by the gas door opener? I stepped on mine and broke the damn thing. 
[right][snapback]337219[/snapback][/right]

Yeah, I have one of those available. Make me an offer.

If the AC alluminum tubing is in good condition then I would like to buy it. I can pay over paypal too.
[right][snapback]337402[/snapback][/right]

Yep, I've got it. Make me an offer.

hey any fenders availiable and the front bumper cover?  bumper corners?
[right][snapback]337418[/snapback][/right]

I have a passenger-side fender available and a front bumper cover and the corner lights. Make me an offer.

[purplegt4]

gimme a pic of the center arm rest w/cup holder top & bottom if u have time.

[gas65]

[quote=Coomer,Sep 23, 2005 - 6:17 PM]

[quote=gas65,Sep 21, 2005 - 11:02 PM]Coomer

Does it still have the release lever for the hatch down by the gas door opener? I stepped on mine and broke the damn thing. 
[right][snapback]337219[/snapback][/right]
[/quote]

Yeah, I have one of those available. Make me an offer.

Shoot me a price.

This post has been edited by gas65: Oct 5, 2005 - 11:39 AM