Look what i found for oil line realted things, New Old ????? oil lines for turbo Options

[urbandork]

I dont know if this is a repeat topic but check it out.

http://shop.vendio.com/funinfeenix/item/646388659/index.html

It has a 1/8 BSPT male on one side and female on the other. It also has two female NPT's tapped into the side for an oil presure gauge and a oil feed line for a turbo. There also is a single fitting with only one NPT tapped on the sides.

This post has been edited by urbandork: Mar 15, 2005 - 10:32 AM

[presure2]

yup, that'd be good for you guys that wanna keep the sender up there on the head, i'd just make sure that its a 1/8bspt 28 thread..it just says 1/8 there..

[orvillescelica]

nice find! i might consider this as my tee and adapter set up right now always leaves me a bit nervous.

[urbandork]

Yes they are.

Where was it on our site that it just said 1/8? We need to fix that!

Craig

-----Original Message-----
From: Craig Kurokawa [mailto:urbandork@hotmail.com]
Sent: Tuesday, March 15, 2005 9:07 PM
To: sales@tunertoys.com
Subject: RE: Oil Take-Off Fitting


are the ports for the stock oil sensor unit 1/8bspt 28 thread. On ur site it

jsut says 1/8.



looks like its a go. Im picking one up asap

[presure2]

cool, make sure you let us know how it works out for ya!