Who has the TSI Turbo Kit?, Some one had and had to modify the manif Options

[Dickster223]

ok i have the tsi extreme turbo kit and the turbo hits the trasnmission someone modified it and got it to work but i cant find the topic anywhere and i need to talk to who ever it was someone please help

I have searched for 2 days like 3 hours aday andcant find the topic or the person

Richard

[x_itchy_b_x]

minaxxx on celicatech.com can help u out with that.

[Ethnykceli]

minaxxx had to grind the transmission down a bit to fit it

[Punch]

link

if he used this on it would of worked fine

This post has been edited by Punch: Apr 21, 2005 - 9:09 AM

[dans_st]

I sold an jgs tools manifold and my old kit, to order the tsi it get here tuesday. will it work?

[Dickster223]

i am going to have to say that u will need to modify it

[Dickster223]

come on know knows of any 7afte's that use the tsi kit some help would be apperciated

and its the wastegate that hits the slave cylinder or master cylinder cant think its 1am is there any way to move either of these?

This post has been edited by Dickster223: Apr 27, 2005 - 12:08 AM

[RUNNIN-LOW]

well you have to cut your manifold and weld a t-3 flange on it i did it. but i used a t-25. you have to cut the stock manifold up high and and grind it down so that you could fit a t-3 plate on it. weld and good to go..its not that easy to explain but yeah e-mail me and i could send you pituce. and show you..yeah and your right it does hit your tranny if you cut it to low it will...one more thing is that you could angle the t-3 flange towards your radiator a little..make sure if you cut the manifold be sure that the flange is even with the hole.

[Dickster223]

i have the t 25 its the one that hits