7th gen seats, got em..need help installing em Options

[Valo666]

Ok..so 2day, i did a 6 hour round trip drive n spent $460 on a set of 7th gen seats(for some reason impossible to find in Ontairo. Any ways, so i got em, now i need to know how 2 install them. Im thinking maybe reuse the slider base and bracet from my orignial seats and pop em on the 7th gen seats. Would that work? or what do i really have 2 du to make these things fit? I was gonna bring it 2 my buddy but i dont think i wanna spend money to make these brackets fit

Valo

[Hanyo]

it will requre you to cut off the old slider brackets off your old seat.. and weld them to the 7th gen seats..

or you can do it the more low tech way.. with some interesting drilling.

[Valo666]

after the welding, will they still b slideable?? or no?

[ChewDogg]

With the 5th gens, 3 out of the 4 bolts line up. Not sure about 6th gens.

[forkee]

after the welding, will they still b slideable?? or no?
[right][snapback]292598[/snapback][/right]

well yea, thats the whole purpose of going through all the trouble (and yes, it will be alot, just looking at the underside of the seats is an eyesore). you'll find out that once you position one of the bolts, NONE of the other 3 line up. you could pay 600 bucks to professionally install it. my suggestion, do it urself. line up the front most outward bolt and make brackets for the rest. reason for the brackets is so it can be attached to both the seat and the original holes without coming loose. just drilling new holes will not provide sufficient threading and the bolt will just pop out. not very safe.....lol

[Cutrara]

PM Mynzeyes he had them but sold them.

[Valo666]

im just gonna take em 2 my buddys shop, my friends certified welder, so he said he could do it for me. he has 2 modify seats all the time cuz of like race seats. My cars goin in for collision dmg that happened last night, gettin KYBs and S-Tech springs installed. Ill get my buddy 2 fix em. he will do it fast n cheap..he already quoted me $120 for the pair.

[Punch]

here is the way it gos, I did my at my buddy's shop, the braket on theside closer to the door will bolt up. The 2 on the back & the other you got to use a air chizzle gun to get them off, move them where you need them then weld. The inner back braket will require a pice of steel to be stretch, the 7thgen braket to fit the 6gen....
I will try to find the pic I took of my seats...

This post has been edited by Punch: Jun 5, 2005 - 11:26 PM

[Valo666]

i got some pics of the seats..finaly



not bad for $460 CND for the pair..only other pair i could find were leather n they were $400 a peice.

[forkee]

k, sorry bout the delay in pics, but heres the difference in the bolting





as u can see....u can only line up one.

[Drocay]

i can't believe u paid that much for stock 7th gen seats.

[Valo666]

u forget im in canada..stuff up here is like 1.5 times more expensive then down in the states. and $460 for a pair is a damn good deal. My other choises were a set of JDM seats out of a 5th gen for $700 for the pair, or get a set of leather 7th gen seats for $400 a peice.

[lil_lissa]

^^ im in ontario and i still wouldn't pay that much for seats!

[Punch]

I paid $260 with shiping from Texas

This post has been edited by Punch: Jun 26, 2005 - 1:47 AM

[dustin15brown]

Dang that's wayy too much for seats

[forkee]

i paid $100

[Valo666]

they r hard to find in canada. mind u i only paid $150, my rents paid the rest.

[Kwanza26]

I paid 250 shipped...

Anyway... you're either gonna need to modify the mount points on the sliders to match the 6gc holes (what I did)... or you're gonna have to drill and tap new holes (what mynzeyes did)...

I've since pulled those seats out and got leather 6gc seats all around. More comfy and better vision...

[Punch]

thats how I did it also, I payed about the same shipped from TX to FL

This post has been edited by Punch: Jul 13, 2005 - 11:05 AM

[doGGy]

You did the right way Same as i did on myne and Marchius cars

thats how I did it also, I payed about the same shipped from TX to FL
[right][snapback]311943[/snapback][/right]

[Valo666]

ty punch, when i get the car back from the shop i might install my 7th gen seats, if not then im gonna sell my 7th gens and buy a set of brides...found a set at this shop for $800cnd a pair for reclineable...authentic brides 2..soooo hot.

[lil_lissa]

^^ where abouts do you live? do you have a kit or anything?

[Valo666]

Etobicoke, and what du u mean kit?? For the seats i bought them used out of a car that had 30xxxkm on it and were sittin in a scrap yard for 4 months. Only thing ive done to them so far, is the plastic base on them was a bright gray colour, so i took them off sanded them and painted them black..well most of them..i missed a few spots on one and didnt do the drivers door side because of the knob that adjusts the lumbar support.

[Punch]

Any pics of your seats???

[lil_lissa]

Etobicoke, and what du u mean kit?? For the seats i bought them used out of a car that had 30xxxkm on it and were sittin in a scrap yard for 4 months. Only thing ive done to them so far, is the plastic base on them was a bright gray colour, so i took them off sanded them and painted them black..well most of them..i missed a few spots on one and didnt do the drivers door side because of the knob that adjusts the lumbar support.
[right][snapback]312181[/snapback][/right]

kit = body kit..

im just wondering in case i see you around sometime, i only live about an hour away

[Valo666]

nope..just a mesh grill and stickers on the rear window, one in white writing saying Next Level and another saying Tien with their logo. When the car comes back from the shop or if i get another one im gonna get a stripe along the side and oem skirts, front splitters and rear extentions. but yea ill be sure to notice your car here lisa, its not 2 often u see a convertable up here.

[lil_lissa]

yeppers.. thats cool, ill keep an eye out

[Valo666]

yeppers.. thats cool, ill keep an eye out
[right][snapback]313202[/snapback][/right]

you probably wont see her for awhile cuz shez in the shop gettin the damage from my accident fixed..if its a write off then im gettin a black 94 gts.

[Punch]

JoKeRkId613 I will do them 4 you ...
I'm trying 2 get a mig welder this week...

This post has been edited by Punch: Sep 15, 2005 - 4:08 AM