 Armor Switch, ? |
  |
 May 29, 2005 - 7:03 PM
|
 
|
|
Enthusiast  Joined Apr 25, '03 From Miami, FL Currently Offline Reputation: 9 (100%)  |
I have nitrous and purge. The Purge Button has 2 connections. If I'm not mistaking, one connection is for a 12V source and the other is to connect back to the red purge valve wire. That's all good. Now I also have an Armor Switch... But this has 3 connections on it. The switch reads:
12V Connections ------------------- Supply Volts | ON Acc. | Earth Ground How do I go about connecting this??? I know the red wire from the NMU has to go to this switch, I just don't know if it's to the "Supply Volts" or the "ON Acc." I need to know where to route the 12V source to. And I also wanted to know why this switch has a ground and the purge button doesn't. Is it because the purge valve has a ground connection already? If so, the NMU has a ground too, why does the Armor switch have one? --------------------  |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: March 23rd, 2026 - 2:11 PM |