dose anyone have the 2nd and 3rd 3sge wire diagram Options

[funnys_tears]

i kinda lost betweend both of 3sge engine... i just trying to put 3rd 3sge ecu to the 2nd 3sge engine.. so dose know here i can find the wire diagram for 2nd and 3rd

[BLADDER_MASTER]

wtf? Save yourself the trouble and sell the 3rd gen 3S-GE ECU and look for the 2nd gen 3S-GE ECU. Last I remember, the 2nd gen 3S-GE ECU has 3 ECU plugs while the 3rd gen 3S-GE ECU has 4 ECU plugs. You're not going to find wiring diagrams for both of those engines over here.

[Coomer]

Isn't the third gen. 3S-GE the BEAMS 3S-GE with VVT-i? If so, the ECU won't work with a second gen. engine. But regardless, you shuold get a hold of Outsider. He's swapping the BEAMS 3S-GE into his car.

[BLADDER_MASTER]

Isn't the third gen. 3S-GE the BEAMS 3S-GE with VVT-i? If so, the ECU won't work with a second gen. engine. But regardless, you shuold get a hold of Outsider. He's swapping the BEAMS 3S-GE into his car.
[right][snapback]317436[/snapback][/right]

No.

3rd gen 3S-GE = 180PS with ACIS
4th gen BEAMS 3S-GE (Celica/MR2) = 200PS with VVT-i

[Coomer]

Alright, thanks for clearing that up. Is the BEAMS 3S-GE found in the Altezza considered a fourth generation 3S-GE as well?

[BLADDER_MASTER]

Alright, thanks for clearing that up. Is the BEAMS 3S-GE found in the Altezza considered a fourth generation 3S-GE as well?
[right][snapback]317489[/snapback][/right]

No problem. Based on what i've read, it is.

[scothaniel]

I have the 3rd gen 3S-GE wiring diagrams (in english) and they appear to be correct so far. I can email them out later tonight for you - just send me your address.

The MR2 3SGE diagrams are available on Richard Doig's Site but they are written in Kanji with English sub-title's written in.

This post has been edited by scothaniel: Jul 28, 2005 - 9:32 AM

[BLADDER_MASTER]

I have the 3rd gen 3S-GE wiring diagrams (in english) and they appear to be correct so far. I can email them out later tonight for you - just  send me your address.

The MR2 3SGE diagrams are available on Richard Doig's Site but they are written in Kanji with English sub-title's written in.
[right][snapback]317702[/snapback][/right]

I tried using those wiring diagrams in that link and it did not help me whatsoever.