FS: Custom front end project Options

[madmods]

I'm selling this custom front end I never finished. All the hard work is done and now it needs to be blocked(sanded). Its top half is a vader and the bottom is a 7th generation veilside. Its being sold as is/no return and I recommend a body shop install unless your good at it. I am also throwing a set of either 5 gen celica sideskirts or my custom 7th gen veilside sideskirts modified to fit a 6th gen. I am moving and it must go asap. The box is very large so I am going to have to freight since I DONT THINK GREYHOUND WILL TAKE IT. You are responsible for shipping charges. Freight I estimate will be 150-200 bucks. Whatever it is, you pay.
I am only shipping in the USA 48 states.
250 takes it all. I am on paypal.

[jgreening]

Sorry to see you are selling this. I think that piece is absolutely beautiful (if finished out properly). It matches the lines of the celica, is original, and doesn't sit too low to be impractical. Good luck with the sale.

[vangSTa_celica]

BUMP for great work by madmods.

[Redline_Racer]

wow man that is a hot kit. does it only fit the coupe/convertable or would it fit a Hatchback also? I think 250 is a steal man! i think it would look good if you had a hood in the design of the 7gen hood.

-Brandon

This post has been edited by Redline_Racer: Sep 30, 2005 - 2:17 PM

[95CelicaST]

the front ends on all the cars is the same, but I am not too sure about the back. It looks great madmods, Good luck with the sale.

[jgreening]

the front ends on all the cars is the same, but I am not too sure about the back. It looks great madmods, Good luck with the sale.
[right][snapback]339935[/snapback][/right]

front and sides are the same between coupe, convertible and hatch. Back of the hatch is different from the other two which are the same.

[eclipse_04a]

can i get a shipping quote for 54007? just a rough estimate would be fine, doesnt have to exact, but within $20-$30 would be nice.

[samguglielmo]

Give me a shout I have money ready

[celicast3sgte]

madmods u taking requests? im interested in that bumper but without the center hole inbetween the lights i dont like that part. PM me with some info.

[madmods]

can i get a shipping quote for 54007? just a rough estimate would be fine, doesnt have to exact, but within $20-$30 would be nice.
[right][snapback]340282[/snapback][/right]

Its got to go freight. that bumper is big. Whatever it cost me to ship, its going to cost you. I am not making one penny out of shipping. I guess 150-200 for freight.
Might be cheaper.

Give me a shout I have money ready
[right][snapback]340500[/snapback][/right]

You got a pm with my cell number bro. Its either the sides in the top pics or these\
in this pic Im posting.

madmods u taking requests? im interested in that bumper but without the center hole inbetween the lights i dont like that part. PM me with some info.
[right][snapback]340547[/snapback][/right]

I'm so burned out working with fiberglass. It would be very easy to patch that hole
up. Somebody could do it for you. Heres a pic before I added the vent.

[eclipse_04a]

i think that kit should go into production, that thing is hot. i know it would ruin the originality of it, but thats the only front end I've seen that I like. If I had the cash in hand instead of waiting for my insurance check I'd take it. And Mad, this is awsome work on this front end, props to you man. I just dont see why your selling it when your so close to being done...

[madmods]

i think that kit should go into production, that thing is hot. i know it would ruin the originality of it, but thats the only front end I've seen that I like. If I had the cash in hand instead of waiting for my insurance check I'd take it. And Mad, this is awsome work on this front end, props to you man. I just dont see why your selling it when your so close to being done...
[right][snapback]340701[/snapback][/right]

I agree, this kit can have a mold made of it very easily and we can have a new kit. the sideskirts in my profile have been cut and modified to fit the 6th gen. those could also be made into a kit.
I have completely changed the look of my car back to stock looking. I went to stock sideskirts and front end with a lip. i was getting to much cop attention. Maybe im just getting 2 old!

[eclipse_04a]

i should be hearing back from my insurance any day now. If its still available when i get my check i may very well buy the front and sides from you. I have yet to be pulled over in my car, but its stock, and its a dark red, so its not too flashy. just silver 17's (konig verdicts).

on another note, what other panels do you have around that you'd sell? my car was hit by baseball size hail a few weeks ago. it may be totalled out, I'm still waiting to hear. I need a hood, fenders, new front bumper, new rear bumper (seperate accident, has a large gash in it). my passenger side tail light is cracked, my stock spoiler is cracked.... it needs alot of work, but as everyone says, use it as a chance to improve it.

This post has been edited by eclipse_04a: Oct 4, 2005 - 9:11 AM

[madmods]

bump item is now on ebay for starting price of 100.00

ebay link

This post has been edited by madmods: Oct 5, 2005 - 12:25 AM

[USAssassin]

hey i just signed up for paypal and im ready to go just send me back a message


This post has been edited by USAssassin: Oct 5, 2005 - 12:27 PM

[USAssassin]

i want that thing so bad but i am 17 about to turn 18 and i just bid on it on ebay for $100

[eclipse_04a]

if someone from here wins it on ebay, do we still get the sides with it?

[madmods]

if someone from here wins it on ebay, do we still get the sides with it?
[right][snapback]341450[/snapback][/right]

yes, the sides are included on ebay also

[madmods]

Bid on ebay please. the highest offer has been 250 so far from assasin
The link sometimes work and not. just do a search for custom celica, and you will find it.

This post has been edited by madmods: Oct 6, 2005 - 3:44 PM

[eclipse_04a]

Item #8005175569 to make your search very easy

[Jaws4God]

man i'm tempted to get that thing... but i already have a front... but it'd be nice to have in case something happens with my lip....


you may want to post a pic of it on your car... I am sure that will help fellow 6gc owners see how sweet this kit is!

[madmods]

you may want to post a pic of it on your car... I am sure that will help fellow 6gc owners see how sweet this kit is!
[right][snapback]342122[/snapback][/right]

Theres a pic of it in the first post. I got the inner fenders off so it gives the impression of the wheel well being wider then it is.




This post has been edited by madmods: Oct 7, 2005 - 12:19 PM

[SoundSlut_dotcom]

I SMALL A HEADLIGHT CONV... SNIFFFFFFFF

[eclipse_04a]

if you dont mind me asking, how much time and money do you have invested in this? (just curious as to what we'd be paying of we had this custom made by a shop)

[madmods]

if you dont mind me asking, how much time and money do you have invested in this? (just curious as to what we'd be paying of we had this custom made by a shop)
[right][snapback]342298[/snapback][/right]

I got 80 hours at my rate 22 bucks an hour.