 race seats installed |
  |
 Oct 3, 2005 - 11:55 PM
|
 
|
 Enthusiast  Joined Mar 19, '04 From Scottsdale, Az Currently Offline Reputation: 2 (100%)  |
Pain in the a$$ or should I say just alot of work. 4+ hrs. I took off the frames/brackets from the stock seats, then with a plasma torch cut off everything but the sliders. The inner slider was then welded to the outer slider to keep it from moving and the surface was grinded flat. The brackets were then bolted on to the car and 2 steel bars were tacked welded across the stock sliders. The seats were then layed on the bars and angled a bit to keep them from rubbing against the center console and then their sliders were tacked to the flat bar. I then removed the seats and the brackets from the seats and welded everything right. Alot of work, but got some cool seats and I used the stock mounting bars for safety.
   
|
|
Oct 4, 2005 - 12:46 PM
|
|
 Enthusiast Joined Aug 17, '03 From Bloomington, Indiana Currently Offline Reputation: 62 (98%) |
look really good madmods
--------------------  |
|
Oct 5, 2005 - 12:31 AM
|
|
 Enthusiast Joined Jan 10, '04 From Shoreline, WA Currently Offline Reputation: 4 (100%) |
That looks great.
--------------------  |
|
Oct 5, 2005 - 1:15 AM
|
|
 Enthusiast Joined Jan 29, '04 From Brooklyn moved to Miramar Florida Currently Offline Reputation: 2 (100%) |
how much did it cost???
|
|
Oct 5, 2005 - 5:08 PM
|
|
 Enthusiast Joined Nov 25, '04 From Warsaw, Poland Currently Offline Reputation: 1 (100%) |
Looks great! What seats are these?
Now you need a set of decent racing belts. I guess white would be nice. 
This post has been edited by TomPoz: Oct 5, 2005 - 5:09 PM -------------------- '94 ST202 - tuned, highly apprieciated, but sold.
'99 ST205 - imported, legalized, Stage 1 completed. For slow driving: Yamaha XVS650 Drag Star. The most recent addition to the family and for the family: Toyota RAV4 2.0 VVTi Celica-Club Poland - Everything you want to know about your favourite car ... in Polish |
|
Oct 7, 2005 - 10:05 AM
|
|
 Enthusiast Joined Oct 1, '02 From Minnesota, USA Currently Offline Reputation: 0 (0%) |
I like those, very clean not all "ricey" looking if that term is even applicable anymore.
-------------------- 95 Toyota Celica GT
Dead for now --> Soon to have a 3S-GTE 02 WRX --> This is for speed - Borla Exhaust - TurboXS BOV - Custom CAI 02 Civic EX - MB Quart Reference 5.25" Components - Rockford MTX 8" Subs in the doors - Alpine Type S Rear Fills - 2x Alpine SWR-1042D Subs in a custom fiberglass box - Alpine F345 Amp for the front doors - Alpine M605 on each Type R - Phoenix Gold wiring - Alpine CDA-9855 Head Unit - Alpine Amp link - 2x Rockford Fosgate 1 Farad Caps - The best Viper 791 alarm install ever |
|
Oct 9, 2005 - 7:56 AM
|
|
 Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
looks good mod, id love to see some pics of the cutting/welding involved!
-------------------- Former Team 5SFTE pro member ;)
 13.6@108MPH, 5SFTE Powered |
|
Oct 9, 2005 - 9:57 AM
|
|
 Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
QUOTE(presure2 @ Oct 9, 2005 - 8:56 AM) looks good mod, id love to see some pics of the cutting/welding involved! [right][snapback]342656[/snapback][/right] agreed. A how-to would be really helpfull to everyone and great for the 6GC knowledge base. -------------------- |
|
Oct 9, 2005 - 6:08 PM
|
|
 Enthusiast Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) |
yea i would like to know how you did it cause i need to fix mine......
|
|
Oct 9, 2005 - 10:33 PM
|
|
|
Enthusiast Joined Mar 19, '04 From Scottsdale, Az Currently Offline Reputation: 2 (100%) |
Best I can do is some close-ups of the brackets. I didn't bring me camera to my friends house. Hes got the plasma cutter. We couldnt figure out how to remove the
inner slider. So we just left it and welded it still to keep it from moving. |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 28th, 2025 - 5:12 PM |