 TWM Shortshifter, Install |
  |
 Nov 9, 2005 - 11:35 AM
|
 
|
|
Enthusiast  Joined Feb 16, '05 From Brantford, Ontario, Canada Currently Offline Reputation: 0 (0%)  |
I was just wondering how the TWM shifter fits into the stock shifter.
How do you remove the old shifter because sometimes there is 4 bolt on top holding the rod in on mine there isnt it looks like a solid unit. There are two small clipped in pieces facing door to door one in the front of the rod one in the back. I should have the shifter soon i am just nervous  please help!! |
|
Nov 9, 2005 - 11:41 AM
|
|
 Enthusiast Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) |
wait till you get the shifter directions with pictures are in the box and easy to follow
|
|
Nov 9, 2005 - 11:15 PM
|
|
 Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
check the sticky in the interior forum. There is a pdf manual for the TWM SS in there in the 7th gen SS install post, I am hosting it. It has pics and all the instructions you will need.
-------------------- |
|
Nov 9, 2005 - 11:21 PM
|
|
 Enthusiast Joined Aug 31, '02 From Virginia Currently Offline Reputation: 4 (100%) |
Thanks guys. I should be getting one soon too.
|
|
Nov 9, 2005 - 11:40 PM
|
|
 Enthusiast Joined May 15, '05 From Toronto Currently Offline Reputation: 4 (100%) |
its an easy install if u got the tools, took me less than an hour to install my 7th gen.
|
|
Dec 25, 2005 - 2:38 AM
|
|
|
Enthusiast Joined Aug 31, '02 From Virginia Currently Offline Reputation: 4 (100%) |
I've got a few steps done on my TWM Shortshifter install, and all is going well so far. I am ready to undo the four 12mm bolts that hold the shifter assembly down. I don't have the right socket accessories at the moment, but here is what I think I am missing:
1) 6-inch extension (I only have a 3 inch right now - using a 3/8" drive ratchet) 2) universal joint (so that I can have flexible angle with ratchet) Please confirm if this is sufficient. Thanks! |
|
Dec 25, 2005 - 4:47 AM
|
|
 Enthusiast Joined Oct 10, '05 From San Diego Currently Offline Reputation: 2 (100%) |
QUOTE Please confirm if this is sufficient. Thanks! i only used a 6 inch extension... it worked fine for me make sure to put the spacers in underneath the shifter assembly... i didnt do that thinking that it wasnt necessary and found out the hard way when it felt like i had rocks in my shifter |
|
Dec 25, 2005 - 12:19 PM
|
|
|
Enthusiast Joined Aug 31, '02 From Virginia Currently Offline Reputation: 4 (100%) |
QUOTE(dlx742 @ Dec 25, 2005 - 2:47 AM) [snapback]370975[/snapback] QUOTE Please confirm if this is sufficient. Thanks! i only used a 6 inch extension... it worked fine for me make sure to put the spacers in underneath the shifter assembly... i didnt do that thinking that it wasnt necessary and found out the hard way when it felt like i had rocks in my shifter Looks like you have the 7th Gen shifter, from your profile. I purchased the one for the 6th Gen, and it does not need or come with the spacers...lucky me. But thanks for the advice on the extension. |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 26th, 2026 - 8:35 AM |