 wanting to convert ST to GT brakes FRONT, questions and info |
  |
 Nov 28, 2005 - 12:23 AM
|
 
|
 Enthusiast  Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%)  |
I have done some searching and from what I have found, for someone to convert their ST brakes to GT brakes in the FRONT, they would need
GT front calipers rotors pads backing plates and lines is there anything else ? is the hub needed to be swapped as well ? or are the above parts direct bolt on to ST hubs ? thanks guys -------------------- |
|
Nov 28, 2005 - 12:45 AM
|
|
 Enthusiast Joined Dec 16, '02 From Cincinnati, Ohio Currently Offline Reputation: 0 (0%) |
what you have looks like all that is needed. the hubs are the same
|
|
Nov 28, 2005 - 10:52 AM
|
|
 Enthusiast Joined Mar 2, '04 From Louisiana, USA Currently Offline Reputation: 2 (100%) |
I've also done the ST->GT front swap. You will be fine with the parts you have above. I actually used the ST lines with no problems, and scrapped the dust covers/backing plates.
|
|
Nov 28, 2005 - 12:23 PM
|
|
 Enthusiast Joined Apr 18, '05 From Lincoln, Ar Currently Offline Reputation: 7 (100%) |
QUOTE(Batman722 @ Nov 28, 2005 - 12:23 AM) [snapback]360354[/snapback] I have done some searching and from what I have found, for someone to convert their ST brakes to GT brakes in the FRONT, they would need GT front calipers rotors pads backing plates and lines is there anything else ? is the hub needed to be swapped as well ? or are the above parts direct bolt on to ST hubs ? thanks guys By bracking plates do you mean the brake Brackets?? |
|
Nov 28, 2005 - 6:24 PM
|
|
 Enthusiast Joined Dec 27, '03 From Nor Cal Currently Offline Reputation: 0 (0%) |
All you need are calipers with brackets (and pads of course) and rotors (assuming it's 6gc GT to 6gc ST). Brake lines are the same... backing plates are the same too.
-------------------- "It's ok to be naked girl... I'm an artist!"
1995 AT200 Celica ST: stocked out daily driver... 1984 AE86 Corolla GT-SR5: silvertop 20V 4AGE project car jacked up with goodies... 1991 SW2x MR2 n/a: bare bones hardtop model soon to be... |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: September 22nd, 2025 - 4:23 PM |