FS: SoCal, '95 ST205 GT4 Hood, Bumper and Foglights, other parts also available Options

[phattyduck]

Ok guys, I have a ST205 GT4 hood, bumper and foglights for sale. These came from the GT4 clip I am using for a swap into my Camry and I obviously have no use for these parts.

Here are some pics:












The parts are not perfect, but they are still very good. The bumper has normal wear. The hood has a few minor dents and scratches. This includes ALL the parts - hood, bumper, rubber trim, bumper beam, bulge vents, etc. (ok, so I don't have the clips to hold it on the car...). I can send you full size (1MB each) versions of the pictures above.

I will give preference to local people to avoid the hassles/risk of shipping (Los Angeles area). This all goes for $1200-ish new, without the fogs and a few other parts...

I also have other parts available:
High beams (no lows) - older non-clear version
Fenders w/ sidemarkers - scratched/dented, but the side markers are good (I may keep the lights for myself...)
possibly lots of other parts I don't use in the swap (power steering pump w/ cooling lines, etc.)

Make some offers, guys.

Thanks,
Charlie

[CelicaZR]

I know this is a long shot...
but would you still have the
power folding mirror relay
by any chance?
If so, I'll take it

[phattyduck]

I know this is a long shot...
but would you still have the
power folding mirror relay
by any chance?
If so, I'll take it

If the relays are in the kick panels, I might. I'll check the schematics to see if I can find them and get back to you.

-Charlie

[phattyduck]

how will this work? excluding local people, does the highest offer take them?

If I can't get $1100-$1200 locally, I'll ship it to the highest bidder (with like a $50 preference to the people with 'early' dibs). Pretty much though, best offer takes it.

Remember, this is EVERYTHING: hood, trim pieces, cover, impact absorber, beam, fogs (with stub wiring), etc... It would be hard to piece this all together new.

-Charlie

[CelicaZR]

I know this is a long shot...
but would you still have the
power folding mirror relay
by any chance?
If so, I'll take it

If the relays are in the kick panels, I might. I'll check the schematics to see if I can find them and get back to you.

-Charlie

I'm not sure where it is located maybe an expert here can help us
locate it. Anyways let me know if you've got it. I'm still interested.
Thanks

[phattyduck]

Ok guys, the best offer so far is $800 +shipping. I'm still open to more offers, of course.

I no longer feel insulted.

-Charlie

[Fate]

how much is shipping looking out to be cuz then i can give a good offer. 08244

[phattyduck]

how much is shipping looking out to be cuz then i can give a good offer. 08244

I should be able to get shipping handled for $50, possibly less (either through my work or Greyhound).

I just shipped a 70lb package across country (heavier, but smaller) for about $40.

Shoot me a PM with an offer. Thanks!

-Charlie

[Fate]

PM sent. hit me up on AIM if you can, zingo1313

[BBoYRuGGeD]

hey this just occured to me but how much do u want for the radiator w/ fans??? fans still funchtional and can u get me a pic?

also, i think im losing my mind but wasnt it this thread that i was asking for the st205 tranny mounts?

bboy

[phattyduck]

hey this just occured to me but how much do u want for the radiator w/ fans??? fans still funchtional and can u get me a pic?

also, i think im losing my mind but wasnt it this thread that i was asking for the st205 tranny mounts?

bboy

I'm pretty sure I'm going to be able to use the radiator - though some custom brackets will have to be made... Also, I'm pretty sure I'm going to keep the mounts. If not, I'll put those up for sale later.

-Charlie

that's some damn good shipping costs!

Aren't corperate discounts awesome?

-Charlie

[WannabeGT4]

Will you be using the water to air intercooler from the ST205? If not, how much do you want for the entire setup including the intercooler, pump, heat exchanger, all hoses for that system and the matching plugs for each component from the engine wiring harness?

This post has been edited by WannabeGT4: Dec 8, 2005 - 11:18 AM

[BBoYRuGGeD]

I'm pretty sure I'm going to be able to use the radiator - though some custom brackets will have to be made... Also, I'm pretty sure I'm going to keep the mounts. If not, I'll put those up for sale later.

-Charlie

if ur not using 'em...dont post the mounts up for sale...just PM ME and I'LL BUY 'EM!

lemme know ok

bboy

btw post up some pics of ur swap (3rd gen 3sgte into camry right?) thats gunna be a hot project

[phattyduck]

Will you be using the water to air intercooler from the ST205? If not, how much do you want for the entire setup including the intercooler, pump, heat exchanger, all hoses for that system and the matching plugs for each component from the engine wiring harness?

The only parts I even might have leftover is the front heat exchanger, sorry. The main reason I got the clip is for that intercooler!

-Charlie

if ur not using 'em...dont post the mounts up for sale...just PM ME and I'LL BUY 'EM!

lemme know ok

bboy

btw post up some pics of ur swap (3rd gen 3sgte into camry right?) thats gunna be a hot project

Heh, ok.

There will most definitely be some sweet "I'm finished" pictures and an associated thread, don't worry!

Latest news: I source all the tranny components at a local shop (including a factory LSD). I thought I was going to be searching for those for a month or two!

-Charlie

[urbandork]

PM sent. I live in LA and can save u the trouble of packing that thing up.

perhaps if we can deal

This post has been edited by urbandork: Dec 8, 2005 - 4:15 PM

[phattyduck]

BTW... Thank you to the mod who cleaned up the thread!!

[CelicaZR]

Have you found that relay for me yet?

[phattyduck]

Have you found that relay for me yet?

I found something called the "Mirror control module" or something like that. It has like 10 or 11 wires going to it, and its about the size of a deck of cards. My wiring diagrams don't have that part of the folding mirror function on them (I have EDM diagrams and a JDM clip) - but I"m pretty sure its what you need. Do you have the diagrams? If so, could you PM me the colors of the wires that come out of it so I can make sure?

-Charlie

[CelicaZR]

Thats sounds about right
here is a pic of it

I'm not sure what colours the wires are.
It's currently at my friend's house.
Can you tell me the colours and i'll match it.
Thanks

[coldbluesteel]

Hey is this stuff available still? If it is how much would it cost me to get it all to 28560? I need hood, bumper,fenders and the trim. Thanks, David.

[azian_advanced]

the highest offer so far is $800 plus shipping... so he'll take anything higher than that as long as that's the highest offer

[phattyduck]

Hey guys - I just got back from a weekend in Las Vegas. I'll get back to everyone in the next couple days.

Thanks,
Charlie

[phattyduck]

Thats sounds about right
here is a pic of it

I'm not sure what colours the wires are.
It's currently at my friend's house.
Can you tell me the colours and i'll match it.
Thanks

Yeah, that's the thing I found. I'll check wire colors 100% when I get back to the garage. The plastic case is white instead of black, but it has the same shape, look, metal bracket and very likely the same wires.

-Charlie

[97AT200]

pm sent

[phattyduck]

pm sent

Replied!

-Charlie

[madmods]

800 dollars for what? the hood and bumper? How much do you want for the hood.

[phattyduck]

800 dollars for what? the hood and bumper? How much do you want for the hood.

I'm not parting it out. The hood does not match the stock bumper and the bumper does not match the stock hood. $800 was the best offer at the time, but its more now. Sorry.

Update: I have two locals interested. I'll get back to those of you that have made good offers if the locals fall though.

-Charlie