 New Product from DCW, Shifter panel Dual gauge pods + Shift boot |
  |
 Mar 7, 2006 - 12:29 PM
|
 
|
 Enthusiast  Joined Oct 28, '02 From Europe, Lithuania Currently Offline Reputation: 8 (100%)  |
Well, i had this idea floating around long time ago (and i got this Idea from Chris Coomer
 he was the first one with the single Shfter gauge pod ), when i still had my ST. Now it became reality.I have 10 of the first product made right now, and pretty soon these will be availible for everyone, right now im only waiting for the leather shop to finish up all the shift boots. It supports 2 52mm gauges, will be painted with structurical paint to match the graines and color of the stock black plastic. Fitting it will be just like 2x2, im supplieng special 2 side adhesive fabric tape with can be reused 100 times - so removing / placing it back will be easy. Here are sneek peek pics of the actuall product - in these pics the color of the pods is different so dont mind it still  Finished product will be just like stock plastic.Later on the run these pods will be availible along with DCW leather shifter knobs, same black leather/red stiching (btw - shifter boots are from natural leather).      Price is still not fully set - but as for now i can say what these will be around 80-100$ shipped along with the shift boot. Thanks, Romas This post has been edited by doGGy: Mar 7, 2006 - 12:35 PM -------------------- Ex celica owner - just a guy from other side of the pond...
Full custom Projects from restoration to performance builds <<<<<< DCw / JDMart >>>>>>> |
|
Mar 7, 2006 - 12:32 PM
|
|
|
Enthusiast Joined Apr 25, '03 From Miami, FL Currently Offline Reputation: 9 (100%) |
--------------------  |
|
Mar 7, 2006 - 12:41 PM
|
|
 Enthusiast Joined Nov 25, '05 From Glasgow Currently Offline Reputation: 0 (0%) |
oooh . Thats sweet
-------------------- 351.5bhp RWD TT
|
|
Mar 7, 2006 - 12:48 PM
|
|
|
Enthusiast Joined Jun 29, '03 Currently Offline Reputation: 0 (0%) |
Nice work... But I wouldn't use it as it would take my eyes off the road.
|
|
Mar 7, 2006 - 12:53 PM
|
|
 Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
nice work
-------------------- 15PSI - 30MPG - Megasquirt Tuned
|
|
Mar 7, 2006 - 1:12 PM
|
|
 Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
nice work romas, they look very clean, i could definetly see a use for them for gauges you dont have a need to constantly monitor, like water temp or somthing to that effect.
-------------------- Former Team 5SFTE pro member ;)
 13.6@108MPH, 5SFTE Powered |
|
Mar 7, 2006 - 1:18 PM
|
|
|
Enthusiast Joined Jun 29, '03 Currently Offline Reputation: 0 (0%) |
QUOTE(presure2 @ Mar 7, 2006 - 10:12 AM) [snapback]403943[/snapback] nice work romas, they look very clean, i could definetly see a use for them for gauges you dont have a need to constantly monitor, like water temp or somthing to that effect. ah... good point. 
|
|
Mar 7, 2006 - 1:35 PM
|
|
|
Enthusiast Joined Oct 28, '02 From Europe, Lithuania Currently Offline Reputation: 8 (100%) |
QUOTE(presure2 @ Mar 7, 2006 - 11:12 AM) [snapback]403943[/snapback] nice work romas, they look very clean, i could definetly see a use for them for gauges you dont have a need to constantly monitor, like water temp or somthing to that effect. This pod is made for "Second choise" gauges, for all others - im working on A-pillar triple gauge pod witch will fully replace you whole pillar instead of ADD ON. And it will be somthing more like this pod i made for WRX.
Attached image(s)
-------------------- Ex celica owner - just a guy from other side of the pond...
Full custom Projects from restoration to performance builds <<<<<< DCw / JDMart >>>>>>> |
|
Mar 7, 2006 - 1:39 PM
|
|
 Enthusiast Joined Oct 12, '05 From Texas Currently Offline Reputation: 59 (100%) |
Very nice work...
Any chance you'd be making one w/just one hole for a gauge? ---> like a oil pressure gauge? Do you have any other options for a single gauge thing like that? thanks, snapshotgt edit: I know you can buy single pod pillers...but man, your work is sweeeeeet! good stuff
This post has been edited by snapshotgt: Mar 7, 2006 - 1:40 PM -------------------- Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJ
Current: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor |
|
Mar 7, 2006 - 1:55 PM
|
|
 Enthusiast Joined Nov 3, '05 From Chicago Suburbs Currently Offline Reputation: 1 (100%) |
WOW! Nice work! If you will be selling them for 80$ I will def. get one, how long untill you the sales begin ?
-------------------- QUOTE(tufy @ Jul 19, 2006 - 7:40 AM) [snapback]458074[/snapback] i dont drive fast, i just fly low |
|
Mar 7, 2006 - 2:35 PM
|
|
 Enthusiast Joined Apr 18, '05 From Calgary Currently Offline Reputation: 20 (100%) |
put me down as "interested" for one of these... it'll be put to good use for when i get a 3sgte later down the road.
-------------------- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- |
|
Mar 7, 2006 - 3:24 PM
|
|
 Enthusiast Joined Feb 24, '05 From Pittsburgh, PA Currently Offline Reputation: 0 (0%) |
QUOTE(azian_advanced @ Mar 7, 2006 - 2:35 PM) [snapback]403997[/snapback] put me down as "interested" for one of these... it'll be put to good use for when i get a 3sgte later down the road. Ya im the same. Def. Nice work man. Looks sick -John |
|
Mar 7, 2006 - 3:44 PM
|
|
 Enthusiast Joined Aug 17, '03 From Bloomington, Indiana Currently Offline Reputation: 62 (98%) |
looks very good man
--------------------  |
|
Mar 7, 2006 - 5:57 PM
|
|
 Enthusiast Joined May 15, '05 From Toronto Currently Offline Reputation: 4 (100%) |
all im sayin is..hotness. Im in. I acutally just bought a dual A-Pillar Mount, but im likin this better.
|
|
Mar 7, 2006 - 6:08 PM
|
|
|
Enthusiast Joined Mar 3, '04 From Hollywood, MD Currently Offline Reputation: 6 (100%) |
very cool i really dont want an a pillar because i feel a little to "showy" with it, so maybe ill find something else to do with my boost gauge and put the air fuel and whatever else i want down there
|
|
Mar 7, 2006 - 6:47 PM
|
|
 Enthusiast Joined Feb 10, '03 From Connecticut Currently Offline Reputation: 11 (100%) |
Romas did you ever think about doing a 60mm 3 gauge pillar to expand our choice on just the Lotek 52mm?
Or is that Apillar 60mm? -------------------- |
|
Mar 7, 2006 - 7:06 PM
|
|
 Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
the shifter pod is a good idea but might be too close for a short shifter, I know mine is close...
-------------------- |
|
Mar 7, 2006 - 7:14 PM
|
|
 Enthusiast Joined Oct 5, '05 From NE Currently Offline Reputation: 6 (100%) |
i'd love to get the pillar pods. hopefully that will be done before may?? lol.. i'll be getting guages and needing a pillar but if it replaces the whole peice i'd take that then the lotek guage pod anyday.
--------------------  |
|
Mar 7, 2006 - 7:32 PM
|
|
|
Enthusiast Joined Jan 27, '06 From VA Currently Offline Reputation: 0 (0%) |
awsome, so is there going to be a list made of people that want one. I am deff. going to be on that so let me know.
|
|
Mar 7, 2006 - 7:55 PM
|
|
|
Enthusiast Joined Apr 25, '03 From Miami, FL Currently Offline Reputation: 9 (100%) |
QUOTE(doGGy @ Mar 7, 2006 - 11:35 AM) [snapback]403960[/snapback] QUOTE(presure2 @ Mar 7, 2006 - 11:12 AM) [snapback]403943[/snapback] nice work romas, they look very clean, i could definetly see a use for them for gauges you dont have a need to constantly monitor, like water temp or somthing to that effect. This pod is made for "Second choise" gauges, for all others - im working on A-pillar triple gauge pod witch will fully replace you whole pillar instead of ADD ON. And it will be somthing more like this pod i made for WRX.-------------------- |
|
Mar 7, 2006 - 8:16 PM
|
|
 Enthusiast Joined Jun 4, '04 From Northern New Jersey Currently Offline Reputation: 2 (100%) |
wow theres some good work right there. i'll be looking out for those on the FS section since i want a voltage gauge and *whatever* and my shift boot is from a 88 alltrac and pretty worn out...lol
bboy --------------------  ..(formerly daily driven) 3S-GTE powered celica currently set @ 12psi.. |
|
Mar 7, 2006 - 8:17 PM
|
|
|
Enthusiast Joined Feb 10, '03 From Connecticut Currently Offline Reputation: 11 (100%) |
QUOTE(JoKeRkId613 @ Mar 7, 2006 - 7:55 PM) [snapback]404175[/snapback] QUOTE(doGGy @ Mar 7, 2006 - 11:35 AM) [snapback]403960[/snapback] QUOTE(presure2 @ Mar 7, 2006 - 11:12 AM) [snapback]403943[/snapback] nice work romas, they look very clean, i could definetly see a use for them for gauges you dont have a need to constantly monitor, like water temp or somthing to that effect. This pod is made for "Second choise" gauges, for all others - im working on A-pillar triple gauge pod witch will fully replace you whole pillar instead of ADD ON. And it will be somthing more like this pod i made for WRX.No it goes over it. -------------------- |
|
Mar 7, 2006 - 8:36 PM
|
|
 Enthusiast Joined Jun 19, '05 From Nebraska Currently Offline Reputation: 4 (100%) |
Romas im totally in for one of these, but i fear a problem with short shifters.
-------------------- Teh Celica sleeps for Winter '06. Suspension overhaul begins........
|
|
Mar 7, 2006 - 11:38 PM
|
|
|
Enthusiast Joined Feb 24, '05 From Pittsburgh, PA Currently Offline Reputation: 0 (0%) |
I want one right nowwww! lol I cant wait any longer
|
|
Mar 8, 2006 - 1:41 AM
|
|
|
Enthusiast Joined Oct 28, '02 From Europe, Lithuania Currently Offline Reputation: 8 (100%) |
QUOTE(Supersprynt @ Mar 7, 2006 - 4:47 PM) [snapback]404112[/snapback] Romas did you ever think about doing a 60mm 3 gauge pillar to expand our choice on just the Lotek 52mm? Or is that Apillar 60mm? Yes Eric i thought about this... Might even try to make 60mm A-pillar pod, and include 3 60>52mm spacers for people with smaller gauges. QUOTE(hitcachi @ Mar 7, 2006 - 6:36 PM) [snapback]404198[/snapback] Romas im totally in for one of these, but i fear a problem with short shifters. No at all - in the pics - shifter is about 30% shorter then stock, and hands aint hitting the gauges. -------------------- Ex celica owner - just a guy from other side of the pond...
Full custom Projects from restoration to performance builds <<<<<< DCw / JDMart >>>>>>> |
|
Mar 8, 2006 - 6:05 AM
|
|
|
Enthusiast Joined Jun 25, '05 From Fort Wayne, IN Currently Offline Reputation: 14 (100%) |
Considering we've got a forthcoming motor swap, I'm signing up to keep an eye on this thread. Gonna need a triple pillar pod plus a couple more......
--------------------  |
|
Mar 8, 2006 - 7:38 AM
|
|
 Enthusiast Joined Mar 25, '05 From Sydney, Australia Currently Offline Reputation: 0 (0%) |
Good work Romas as always.
I'm definiately interested
--------------------  98 ST204 ZR - Black Beauty - Roaming the streets of Sydney 73 TA22 LT - Tiffany Blue - Mint Classic Weekend Cruiser 75 TA22 LT - Snow White - Mint Classic Weekend Cruiser 77 RA28 LT - Flubber Green - Mint Classic Weekend Cruiser 94 MX-5 NA8 Clubman - Red Racer - Looking for corners WIP Project: 69 RT40 Corona, 2nd WIP Project: 66 RT40 1600s Corona 86 Corona RT142 - Daily Driver 6GC 4 Life Baby!!! |
|
Mar 8, 2006 - 7:58 AM
|
|
 Enthusiast Joined Jan 22, '04 From WA, Australia Currently Offline Reputation: 1 (100%) |
QUOTE(CelicaZR @ Mar 8, 2006 - 8:38 PM) [snapback]404479[/snapback] Good work Romas as always. I'm definiately interested This is for a LHD.
|
|
Mar 8, 2006 - 8:39 AM
|
|
|
Enthusiast Joined Aug 17, '03 From Bloomington, Indiana Currently Offline Reputation: 62 (98%) |
QUOTE(ShadowFX @ Mar 8, 2006 - 12:58 PM) [snapback]404483[/snapback] QUOTE(CelicaZR @ Mar 8, 2006 - 8:38 PM) [snapback]404479[/snapback] Good work Romas as always. I'm definiately interested This is for a LHD. pretty sure, almost positive that he IS LHD 
-------------------- |
|
Mar 8, 2006 - 8:49 AM
|
|
 Enthusiast Joined Feb 25, '03 From Springfield, MO Currently Offline Reputation: 1 (100%) |
i don't eve nunderstand why romas even posts on here. he should have his own sticky titiled "bad ass stuff you want" lol
put me down as interested -------------------- Coming in 2010 full paintjob - new wheels - modified body - new interior - engine build- marriage |
|
Mar 8, 2006 - 3:25 PM
|
|
 Enthusiast Joined Oct 30, '04 From So Cal Currently Offline Reputation: 13 (100%) |
nooooo!!! the car lighter is gone!! now i gotta carry my own lighter......
-------------------- |
|
Mar 8, 2006 - 4:54 PM
|
|
|
Enthusiast Joined Jan 22, '04 From WA, Australia Currently Offline Reputation: 1 (100%) |
QUOTE(dustin15brown @ Mar 8, 2006 - 9:39 PM) [snapback]404488[/snapback] QUOTE(ShadowFX @ Mar 8, 2006 - 12:58 PM) [snapback]404483[/snapback] QUOTE(CelicaZR @ Mar 8, 2006 - 8:38 PM) [snapback]404479[/snapback] Good work Romas as always. I'm definiately interested This is for a LHD. pretty sure, almost positive that he IS LHD He's from Australia.. = RHD. |
|
Mar 9, 2006 - 1:28 AM
|
|
|
Enthusiast Joined Mar 25, '05 From Sydney, Australia Currently Offline Reputation: 0 (0%) |
But the guage where the shifter should be the same, shouldnt it?
Damn I want those guage holders on the A-pillar. How hard will it be to design it from LHD to RHD Romas? -------------------- 98 ST204 ZR - Black Beauty - Roaming the streets of Sydney 73 TA22 LT - Tiffany Blue - Mint Classic Weekend Cruiser 75 TA22 LT - Snow White - Mint Classic Weekend Cruiser 77 RA28 LT - Flubber Green - Mint Classic Weekend Cruiser 94 MX-5 NA8 Clubman - Red Racer - Looking for corners WIP Project: 69 RT40 Corona, 2nd WIP Project: 66 RT40 1600s Corona 86 Corona RT142 - Daily Driver 6GC 4 Life Baby!!! |
|
Mar 9, 2006 - 2:57 AM
|
|
|
Enthusiast Joined Oct 28, '02 From Europe, Lithuania Currently Offline Reputation: 8 (100%) |
Shifter is totaly different. And it is for LHD only.
A-Pillar - same. it will be very hard, actually totaly from scratch work to make the LHD Pillar fit on RHD (i mean gauge pillar )QUOTE(CelicaZR @ Mar 8, 2006 - 11:28 PM) [snapback]404973[/snapback] But the guage where the shifter should be the same, shouldnt it? Damn I want those guage holders on the A-pillar. How hard will it be to design it from LHD to RHD Romas? -------------------- Ex celica owner - just a guy from other side of the pond...
Full custom Projects from restoration to performance builds <<<<<< DCw / JDMart >>>>>>> |
|
Mar 9, 2006 - 3:24 AM
|
|
|
Enthusiast Joined Jan 22, '04 From WA, Australia Currently Offline Reputation: 1 (100%) |
QUOTE(CelicaZR @ Mar 9, 2006 - 2:28 PM) [snapback]404973[/snapback] But the guage where the shifter should be the same, shouldnt it? Damn I want those guage holders on the A-pillar. How hard will it be to design it from LHD to RHD Romas? lol. knew you were RHD.  and since the centre console does point towards the driver, LHD would be the complete opposite to RHD.. i think?
|
|
Mar 9, 2006 - 4:20 AM
|
|
 Enthusiast Joined Aug 17, '03 From new jersey Currently Offline Reputation: 0 (0%) |
very nice work i deffinately want one of those thangs...
|
|
Mar 9, 2006 - 6:22 AM
|
|
|
Enthusiast Joined Mar 25, '05 From Sydney, Australia Currently Offline Reputation: 0 (0%) |
QUOTE(doGGy @ Mar 9, 2006 - 6:57 PM) [snapback]404997[/snapback] Shifter is totaly different. And it is for LHD only. A-Pillar - same. it will be very hard, actually totaly from scratch work to make the LHD Pillar fit on RHD (i mean gauge pillar )QUOTE(CelicaZR @ Mar 8, 2006 - 11:28 PM) [snapback]404973[/snapback] But the guage where the shifter should be the same, shouldnt it? Damn I want those guage holders on the A-pillar. How hard will it be to design it from LHD to RHD Romas? Man that sucks Oh well. I hope you make something that is applicable to any drive hand soon
-------------------- 98 ST204 ZR - Black Beauty - Roaming the streets of Sydney 73 TA22 LT - Tiffany Blue - Mint Classic Weekend Cruiser 75 TA22 LT - Snow White - Mint Classic Weekend Cruiser 77 RA28 LT - Flubber Green - Mint Classic Weekend Cruiser 94 MX-5 NA8 Clubman - Red Racer - Looking for corners WIP Project: 69 RT40 Corona, 2nd WIP Project: 66 RT40 1600s Corona 86 Corona RT142 - Daily Driver 6GC 4 Life Baby!!! |
|
Mar 9, 2006 - 11:50 AM
|
|
 Enthusiast Joined Jun 30, '03 From O-town, FL Currently Offline Reputation: 0 (0%) |
Hmm...yeah. I still need my lighter.
-------------------- Sometimes we live to beat the odds.
- Ryan  aim: rkgreen04 |
|
Mar 9, 2006 - 11:53 AM
|
|
|
Enthusiast Joined Mar 12, '05 From ATL, Georgia Currently Offline Reputation: 0 (0%) |
QUOTE(doGGy @ Mar 7, 2006 - 1:35 PM) [snapback]403960[/snapback] QUOTE(presure2 @ Mar 7, 2006 - 11:12 AM) [snapback]403943[/snapback] nice work romas, they look very clean, i could definetly see a use for them for gauges you dont have a need to constantly monitor, like water temp or somthing to that effect. This pod is made for "Second choise" gauges, for all others - im working on A-pillar triple gauge pod witch will fully replace you whole pillar instead of ADD ON. And it will be somthing more like this pod i made for WRX.you never cease to amaze me man first teh gauges, now this?
|
|
Mar 10, 2006 - 12:25 AM
|
|
 Enthusiast Joined Jan 27, '05 From Rockville, MD Currently Offline Reputation: 1 (100%) |
Is there a way you can design something for the center console where you can fit an Apexi SAFC-II?
--------------------  |
|
Mar 15, 2006 - 9:02 AM
|
|
|
Enthusiast Joined Jun 25, '05 From Fort Wayne, IN Currently Offline Reputation: 14 (100%) |
Any update on this????
-------------------- |
|
Mar 19, 2006 - 2:17 AM
|
|
|
Enthusiast Joined Jan 14, '06 From New York Currently Offline Reputation: 0 (0%) |
Nice work, Doggy! You may add me to your list if there is one and I do hope it'll come out soon!
nemesis -------------------- I drive a Celica. Anything "less" is just a car! |
|
Mar 19, 2006 - 3:54 AM
|
|
 Enthusiast Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) |
I would like something for the SAFC-II as well. I might pick one up, and t'would be sweet to mount it there.
-------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
 I'm not really an asshole, but I play one on the internet. **** Photobucket |
|
Apr 3, 2006 - 6:19 PM
|
|
 Enthusiast Joined Nov 7, '05 From Brisbane, Australia Currently Offline Reputation: 0 (0%) |
they are awesome. bummer it's only for LHD....
oh well, i have the idea now, i can get someone to make it for RHD
|
|
Apr 4, 2006 - 12:01 PM
|
|
|
Enthusiast Joined Oct 28, '02 From Europe, Lithuania Currently Offline Reputation: 8 (100%) |
QUOTE(MaX @ Apr 3, 2006 - 4:19 PM) [snapback]417386[/snapback] they are awesome. bummer it's only for LHD.... oh well, i have the idea now, i can get someone to make it for RHD These will be availible for both RHD and LHD setups pretty soon -------------------- Ex celica owner - just a guy from other side of the pond...
Full custom Projects from restoration to performance builds <<<<<< DCw / JDMart >>>>>>> |
|
Apr 4, 2006 - 2:56 PM
|
|
|
Enthusiast Joined Jun 25, '05 From Fort Wayne, IN Currently Offline Reputation: 14 (100%) |
QUOTE(doGGy @ Apr 4, 2006 - 1:01 PM) [snapback]417690[/snapback] QUOTE(MaX @ Apr 3, 2006 - 4:19 PM) [snapback]417386[/snapback] they are awesome. bummer it's only for LHD.... oh well, i have the idea now, i can get someone to make it for RHD These will be availible for both RHD and LHD setups pretty soon I'll take one for LHD when they become available. -------------------- |
|
Apr 4, 2006 - 3:12 PM
|
|
|
Enthusiast Joined Jun 30, '05 From Chattanooga, TN Currently Offline Reputation: 5 (100%) |
are you getting the boots made by someone? would it be possible to do the stitching in blue?
|
|
Apr 4, 2006 - 3:14 PM
|
|
|
Enthusiast Joined Oct 28, '02 From Europe, Lithuania Currently Offline Reputation: 8 (100%) |
QUOTE(Stu37363 @ Apr 4, 2006 - 1:12 PM) [snapback]417785[/snapback] are you getting the boots made by someone? would it be possible to do the stitching in blue? Yes, once i start the production - boots will be availible in all the posible colors. Same with the shift knobs. You will be able to chose Leather color / stiching color. -------------------- Ex celica owner - just a guy from other side of the pond...
Full custom Projects from restoration to performance builds <<<<<< DCw / JDMart >>>>>>> |
|
Apr 4, 2006 - 4:40 PM
|
|
|
Enthusiast Joined Oct 12, '05 From Texas Currently Offline Reputation: 59 (100%) |
When will these be availible?
-snap -------------------- Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJ
Current: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor |
|
Apr 4, 2006 - 7:00 PM
|
|
|
Enthusiast Joined Feb 25, '03 From Springfield, MO Currently Offline Reputation: 1 (100%) |
how bout you just gimme that CF
-------------------- Coming in 2010 full paintjob - new wheels - modified body - new interior - engine build- marriage |
|
Apr 5, 2006 - 1:29 AM
|
|
|
Enthusiast Joined Oct 28, '02 From Europe, Lithuania Currently Offline Reputation: 8 (100%) |
QUOTE(snapshotgt @ Apr 4, 2006 - 2:40 PM) [snapback]417819[/snapback] When will these be availible? -snap bout month later for sure. -------------------- Ex celica owner - just a guy from other side of the pond...
Full custom Projects from restoration to performance builds <<<<<< DCw / JDMart >>>>>>> |
|
Apr 5, 2006 - 3:48 AM
|
|
|
Enthusiast Joined Mar 25, '05 From Sydney, Australia Currently Offline Reputation: 0 (0%) |
Yay! Put me down for a RHD one
when it becomes available
-------------------- 98 ST204 ZR - Black Beauty - Roaming the streets of Sydney 73 TA22 LT - Tiffany Blue - Mint Classic Weekend Cruiser 75 TA22 LT - Snow White - Mint Classic Weekend Cruiser 77 RA28 LT - Flubber Green - Mint Classic Weekend Cruiser 94 MX-5 NA8 Clubman - Red Racer - Looking for corners WIP Project: 69 RT40 Corona, 2nd WIP Project: 66 RT40 1600s Corona 86 Corona RT142 - Daily Driver 6GC 4 Life Baby!!! |
|
Apr 6, 2006 - 12:33 PM
|
|
 Enthusiast Joined Feb 6, '03 From huntingdon tennessee Currently Offline Reputation: 1 (100%) |
put me down for a LHD (i'm a D.A.) one w/ a red/black shift boot - horray ... i thought this post had been deleted
This post has been edited by celi_gt_racer: May 5, 2006 - 10:16 AM --------------------  |
|
Apr 6, 2006 - 12:44 PM
|
|
|
Enthusiast Joined Oct 28, '02 From Europe, Lithuania Currently Offline Reputation: 8 (100%) |
RHD people can check this one too - sooner or later this one will become availible too:
http://www.6gc.net/forums/index.php?showto...=0&#entry418442 -------------------- Ex celica owner - just a guy from other side of the pond...
Full custom Projects from restoration to performance builds <<<<<< DCw / JDMart >>>>>>> |
|
Apr 6, 2006 - 12:54 PM
|
|
|
Enthusiast Joined Feb 6, '03 From huntingdon tennessee Currently Offline Reputation: 1 (100%) |
are you talking about ur custom three pod pillar, or the 3 pod dash piece? ... i want them all ... lol
-------------------- |
|
Apr 6, 2006 - 12:58 PM
|
|
|
Enthusiast Joined Feb 10, '03 From warren, ohio Currently Offline Reputation: 0 (0%) |
Put me down for the shift boot gauge holder. thanks they look awsome
|
|
Apr 9, 2006 - 12:56 AM
|
|
 Enthusiast Joined Mar 22, '06 From Wesley chapel, Florida Currently Offline Reputation: 13 (93%) |
them bitchs are bad put me down too lol for real that is nice work man keep it up
--------------------  |
|
Apr 9, 2006 - 12:27 PM
|
|
 Enthusiast Joined Nov 13, '02 From So Cal Currently Offline Reputation: 3 (100%) |
QUOTE(95CelicaST @ Mar 19, 2006 - 1:54 AM) [snapback]409908[/snapback] I would like something for the SAFC-II as well. I might pick one up, and t'would be sweet to mount it there. i third that motion
--------------------  |
|
Apr 9, 2006 - 10:06 PM
|
|
 Enthusiast Joined Jun 21, '05 From New york Currently Offline Reputation: 1 (100%) |
I would liek one of these PM me when they are ready...
Bigal -------------------- 1994 celica GT.....3sgte in a month! all helpers are welcome!!! i live in Plattsburgh, NY.
|
|
Apr 19, 2006 - 1:51 PM
|
|
 Enthusiast Joined Sep 7, '05 From LISBON,PORTUGAL Currently Offline Reputation: 4 (100%) |
Put me down for the shift boot gauge holder.
they look awsome thanks -------------------- |
|
May 3, 2006 - 9:35 AM
|
|
|
Enthusiast Joined Mar 25, '05 From Sydney, Australia Currently Offline Reputation: 0 (0%) |
Update please
-------------------- 98 ST204 ZR - Black Beauty - Roaming the streets of Sydney 73 TA22 LT - Tiffany Blue - Mint Classic Weekend Cruiser 75 TA22 LT - Snow White - Mint Classic Weekend Cruiser 77 RA28 LT - Flubber Green - Mint Classic Weekend Cruiser 94 MX-5 NA8 Clubman - Red Racer - Looking for corners WIP Project: 69 RT40 Corona, 2nd WIP Project: 66 RT40 1600s Corona 86 Corona RT142 - Daily Driver 6GC 4 Life Baby!!! |
|
Jan 1, 2007 - 1:53 AM
|
|
|
Enthusiast Joined Dec 14, '06 From MN, USA Currently Offline Reputation: 2 (100%) |
Any more?
|
|
Jan 1, 2007 - 2:56 AM
|
|
|
Enthusiast Joined Sep 28, '06 From Montreal, QC, Canada Currently Offline Reputation: 2 (100%) |
Romas iz da shiznit! Want that dual pod, it's so sexy...
-------------------- One o'dem crazy Canadian freaks, eh?
|
|
Jan 1, 2007 - 8:58 AM
|
|
|
Enthusiast Joined Oct 28, '02 From Europe, Lithuania Currently Offline Reputation: 8 (100%) |
Update? Simply nothing... One guy bought it already from me, and should already have it in his hands, but i sold it as it is without any tips on how to mount it becose he wanted it so bad... I still dont have time to solve this problem.. Hope i will figure out this in a upcoming month, cuz i will be working on them again.
-------------------- Ex celica owner - just a guy from other side of the pond...
Full custom Projects from restoration to performance builds <<<<<< DCw / JDMart >>>>>>> |
|
Jan 1, 2007 - 4:53 PM
|
|
|
Enthusiast Joined Feb 26, '06 From Illinois Currently Offline Reputation: 1 (100%) |
that would be awsome cause i would like one of these also
--------------------  |
|
Jan 1, 2007 - 7:52 PM
|
|
|
Enthusiast Joined Oct 5, '05 From NE Currently Offline Reputation: 6 (100%) |
How much would it be just for the boot? i just need a black boot with red stitching?
-------------------- |
|
Jan 28, 2007 - 3:58 PM
|
|
|
Enthusiast Joined Feb 26, '06 From Illinois Currently Offline Reputation: 1 (100%) |
anymore info on this?
anymore info on this? -------------------- |
|
May 1, 2007 - 7:58 PM
|
|
|
Enthusiast Joined Oct 13, '06 From palmetto,FL Currently Offline Reputation: 1 (100%) |
are you going to build these?
|
|
May 2, 2007 - 11:48 PM
|
|
|
Enthusiast Joined May 13, '06 From Jonesboro, AR Currently Offline Reputation: 0 (0%) |
When you finish them, put me down for one, gonna fill them with autometer cobalt gagues
|
|
May 2, 2007 - 11:53 PM
|
|
 Enthusiast Joined Jul 7, '06 From Los Alamos, NM Currently Offline Reputation: 1 (100%) |
QUOTE(celiracer @ Jan 1, 2007 - 7:52 PM) [snapback]514452[/snapback] How much would it be just for the boot? i just need a black boot with red stitching? x2 -------------------- 2015 Subaru WRX. World Rally Blue/Black
2001 Honda S2000. Spa Yellow/Black |
|
May 3, 2007 - 1:43 PM
|
|
|
Enthusiast Joined Feb 26, '06 From Illinois Currently Offline Reputation: 1 (100%) |
i would still like the peice
-------------------- |
|
May 5, 2007 - 11:36 AM
|
|
|
Enthusiast Joined Aug 17, '03 From Bloomington, Indiana Currently Offline Reputation: 62 (98%) |
QUOTE(spolski07 @ May 3, 2007 - 12:53 AM) [snapback]553558[/snapback] QUOTE(celiracer @ Jan 1, 2007 - 7:52 PM) [snapback]514452[/snapback] How much would it be just for the boot? i just need a black boot with red stitching? x2 Mac used to do a lot of this stuff... He still may be able to -------------------- |
|
May 6, 2007 - 9:14 AM
|
|
|
Enthusiast Joined Mar 20, '07 From Bradenton,FL Currently Offline Reputation: 4 (100%) |
i dont care who makes it, but that would be an awsome addition to the interior. let me know when somebody stats to make these!
QUOTE(doGGy @ Mar 7, 2006 - 5:29 PM) [snapback]403916[/snapback] Well, i had this idea floating around long time ago (and i got this Idea from Chris Coomer he was the first one with the single Shfter gauge pod ), when i still had my ST. Now it became reality.I have 10 of the first product made right now, and pretty soon these will be availible for everyone, right now im only waiting for the leather shop to finish up all the shift boots. It supports 2 52mm gauges, will be painted with structurical paint to match the graines and color of the stock black plastic. Fitting it will be just like 2x2, im supplieng special 2 side adhesive fabric tape with can be reused 100 times - so removing / placing it back will be easy. Here are sneek peek pics of the actuall product - in these pics the color of the pods is different so dont mind it still Finished product will be just like stock plastic.Later on the run these pods will be availible along with DCW leather shifter knobs, same black leather/red stiching (btw - shifter boots are from natural leather). Price is still not fully set - but as for now i can say what these will be around 80-100$ shipped along with the shift boot. Thanks, Romas Romas what did you do with the 10products you have produced already? i will buy one! |
|
May 6, 2007 - 5:23 PM
|
|
|
Enthusiast Joined Oct 28, '02 From Europe, Lithuania Currently Offline Reputation: 8 (100%) |
actually i did nothing with them - they are just collecting dust in one of my shelfs. The thing is - tha ti never had time to figure out how to mount these in the place - and double side tape doest helps much in this place... So this is why i never let them on sale - exept one guy in US has one - cuz he said its ok for him and that he would figure out the fitment issue by him self.
-------------------- Ex celica owner - just a guy from other side of the pond...
Full custom Projects from restoration to performance builds <<<<<< DCw / JDMart >>>>>>> |
|
May 7, 2007 - 8:00 AM
|
|
|
Enthusiast Joined Feb 26, '06 From Illinois Currently Offline Reputation: 1 (100%) |
i'll be interested till you say your not going to make them
This post has been edited by fanboy95: May 7, 2007 - 8:05 AM -------------------- |
|
May 7, 2007 - 3:16 PM
|
|
|
Enthusiast Joined Oct 13, '06 From palmetto,FL Currently Offline Reputation: 1 (100%) |
romas i still will buy one. i will figure out the mounting myself.
|
|
May 7, 2007 - 3:19 PM
|
|
|
Enthusiast Joined Oct 28, '02 From Europe, Lithuania Currently Offline Reputation: 8 (100%) |
Guys guys - relax... I have way too much stuff going on, once i get some time - i will re-look on this and will DEFINANTLY get this going. I just dont want to sell unfinished stuff.
-------------------- Ex celica owner - just a guy from other side of the pond...
Full custom Projects from restoration to performance builds <<<<<< DCw / JDMart >>>>>>> |
|
May 7, 2007 - 3:37 PM
|
|
 Enthusiast Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) |
when u re-look at this can you re-look @ an RHD option
|
|
May 7, 2007 - 8:35 PM
|
|
|
Enthusiast Joined Mar 25, '05 From Sydney, Australia Currently Offline Reputation: 0 (0%) |
QUOTE(playr158 @ May 8, 2007 - 6:37 AM) [snapback]555060[/snapback] when u re-look at this can you re-look @ an RHD option x2
-------------------- 98 ST204 ZR - Black Beauty - Roaming the streets of Sydney 73 TA22 LT - Tiffany Blue - Mint Classic Weekend Cruiser 75 TA22 LT - Snow White - Mint Classic Weekend Cruiser 77 RA28 LT - Flubber Green - Mint Classic Weekend Cruiser 94 MX-5 NA8 Clubman - Red Racer - Looking for corners WIP Project: 69 RT40 Corona, 2nd WIP Project: 66 RT40 1600s Corona 86 Corona RT142 - Daily Driver 6GC 4 Life Baby!!! |
|
May 11, 2007 - 12:03 AM
|
|
 Enthusiast Joined Jan 30, '06 From Augusta, GA Currently Offline Reputation: 4 (100%) |
QUOTE(Boss-Celica @ Mar 10, 2006 - 12:25 AM) [snapback]405490[/snapback] Is there a way you can design something for the center console where you can fit an Apexi SAFC-II? X2! I didn't even think about that...and nowhere to put mine. Damn. Anyways, I'll buy the panel replacement, but won't be needing a boot. Red's not my theme. Should we start a list, or is it a bit too soon!? I'm excited! -Triscuit This post has been edited by m0dd3d1: May 11, 2007 - 12:05 AM -------------------- 2007 Subaru Impreza WRX STi 1974 Datsun 260Z 1997 Subaru Legacy L Wagon Kind of missin' my Celica GT! Hit me up if you're ever in my area. I'm always down for a meet. |
|
May 19, 2007 - 3:35 AM
|
|
|
Enthusiast Joined Feb 18, '07 From Clackamas, Oregon USA Currently Offline Reputation: 2 (100%) |
QUOTE(doGGy @ Mar 7, 2006 - 6:35 PM) [snapback]403960[/snapback] QUOTE(presure2 @ Mar 7, 2006 - 11:12 AM) [snapback]403943[/snapback] nice work romas, they look very clean, i could definetly see a use for them for gauges you dont have a need to constantly monitor, like water temp or somthing to that effect. This pod is made for "Second choise" gauges, for all others - im working on A-pillar triple gauge pod witch will fully replace you whole pillar instead of ADD ON. And it will be somthing more like this pod i made for WRX.Alright, Im thinking both of these look amazing! Put me down for both and ill buy which ever comes out first!!! Keep me posted!!! |
|
May 23, 2007 - 9:22 PM
|
|
|
Enthusiast Joined Mar 4, '06 From Ohio Currently Offline Reputation: 10 (100%) |
Is that triple gauge trim piece below the radio avalible? If so how much?
|
|
Jun 2, 2007 - 9:34 AM
|
|
|
Enthusiast Joined Jan 30, '06 From Augusta, GA Currently Offline Reputation: 4 (100%) |
Is there any sort of update on this yet? I'm sorry Doggy if it seems like you're getting bombarded by everyone on this subject, you just seem to make amazing stuff! On your own time, let us know mate. Cheers.
-------------------- 2007 Subaru Impreza WRX STi 1974 Datsun 260Z 1997 Subaru Legacy L Wagon Kind of missin' my Celica GT! Hit me up if you're ever in my area. I'm always down for a meet. |
|
Jul 3, 2007 - 7:36 PM
|
|
|
Enthusiast Joined Jan 30, '06 From Augusta, GA Currently Offline Reputation: 4 (100%) |
Bump for a possible update?
-------------------- 2007 Subaru Impreza WRX STi 1974 Datsun 260Z 1997 Subaru Legacy L Wagon Kind of missin' my Celica GT! Hit me up if you're ever in my area. I'm always down for a meet. |
|
Jul 3, 2007 - 10:51 PM
|
|
 Enthusiast Joined Apr 22, '07 From Bay Area, California Currently Offline Reputation: 14 (100%) |
X2 !!!
-------------------- You say you don't understand how we go dumb, but have you ever been where i'm from?
-=-] Livin it in tha bay's a lil different [-=- |
|
Aug 10, 2007 - 11:56 AM
|
|
|
Enthusiast Joined Apr 22, '07 From Bay Area, California Currently Offline Reputation: 14 (100%) |
Update ?
-------------------- You say you don't understand how we go dumb, but have you ever been where i'm from?
-=-] Livin it in tha bay's a lil different [-=- |
|
Aug 10, 2007 - 3:23 PM
|
|
 Enthusiast Joined Feb 14, '07 From Provo, UT USA Currently Offline Reputation: 25 (100%) |
i don't think these are ever going to go into production since doggy isn't going to be making any more of his stuff for the celi. too time consuming and shipping is a Bit**. maybe someone else would be willing to make these though. there are a few people around that have the ability to make these kinds of things.
--------------------  Call me a traitor! See if I care. ;) |
|
Aug 11, 2007 - 8:37 AM
|
|
|
Enthusiast Joined Jan 30, '06 From Augusta, GA Currently Offline Reputation: 4 (100%) |
Yeah, that's too bad. I read that thread a few days ago. Oh well I guess.
-------------------- 2007 Subaru Impreza WRX STi 1974 Datsun 260Z 1997 Subaru Legacy L Wagon Kind of missin' my Celica GT! Hit me up if you're ever in my area. I'm always down for a meet. |
|
Aug 11, 2007 - 9:38 AM
|
|
|
Enthusiast Joined Feb 26, '06 From Illinois Currently Offline Reputation: 1 (100%) |
i was wanting the shift pod
-------------------- |
|
Aug 11, 2007 - 1:13 PM
|
|
|
Enthusiast Joined Aug 17, '03 From Bloomington, Indiana Currently Offline Reputation: 62 (98%) |
Yeah, these won't be made anymore. US money isn't worth a lot, shipping is killer, time frames aren't consistant with busy schedules, and too many people flake out once a product is made.
-------------------- |
|
Feb 6, 2008 - 4:16 PM
|
|
 Enthusiast Joined Mar 29, '07 From Philly Currently Offline Reputation: 11 (100%) |
any update on this?? i would really like one
--------------------  I"M NOT A TOYOTA FAN, IM A FANATIC 1984 accord hatch 5 speed (T-Belt)-Junkyard 1991 VDUB jetta wolfsburg Ed. 5 speed (clutch)-junkyard 1988 Dodge Aries K (sold) 1969 Chevy El camino - Traded for celica 1991 Dodge Daytona-Traded for Celica 1988 Chevy Camaro-Work in Progress 1989 Ford Mustang LX 5.0 - For Sale 1995 Toyota Celica-Work in Progress |
|
Feb 6, 2008 - 4:30 PM
|
|
|
Enthusiast Joined Aug 17, '03 From Bloomington, Indiana Currently Offline Reputation: 62 (98%) |
QUOTE(dustin15brown @ Aug 11, 2007 - 1:13 PM) [snapback]587198[/snapback] Yeah, these won't be made anymore. US money isn't worth a lot, shipping is killer, time frames aren't consistant with busy schedules, and too many people flake out once a product is made. Right here QUOTE(95st-celica @ Feb 6, 2008 - 4:16 PM) [snapback]638728[/snapback] any update on this?? i would really like one -------------------- |
|
Feb 6, 2008 - 4:39 PM
|
|
|
Enthusiast Joined Mar 29, '07 From Philly Currently Offline Reputation: 11 (100%) |
well is there any left over? and i though doggy was makin them?
-------------------- I"M NOT A TOYOTA FAN, IM A FANATIC 1984 accord hatch 5 speed (T-Belt)-Junkyard 1991 VDUB jetta wolfsburg Ed. 5 speed (clutch)-junkyard 1988 Dodge Aries K (sold) 1969 Chevy El camino - Traded for celica 1991 Dodge Daytona-Traded for Celica 1988 Chevy Camaro-Work in Progress 1989 Ford Mustang LX 5.0 - For Sale 1995 Toyota Celica-Work in Progress |
|
Feb 6, 2008 - 4:53 PM
|
|
 Enthusiast Joined Aug 14, '05 From Corpus Christi Tx Currently Offline Reputation: 5 (100%) |
he was the one making them but he also said he wasnt going to anymore.
|
|
Feb 6, 2008 - 5:01 PM
|
|
|
Enthusiast Joined Mar 29, '07 From Philly Currently Offline Reputation: 11 (100%) |
this sucks caus i want one and i dont know if anyone else sells them or makes them
-------------------- I"M NOT A TOYOTA FAN, IM A FANATIC 1984 accord hatch 5 speed (T-Belt)-Junkyard 1991 VDUB jetta wolfsburg Ed. 5 speed (clutch)-junkyard 1988 Dodge Aries K (sold) 1969 Chevy El camino - Traded for celica 1991 Dodge Daytona-Traded for Celica 1988 Chevy Camaro-Work in Progress 1989 Ford Mustang LX 5.0 - For Sale 1995 Toyota Celica-Work in Progress |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: June 9th, 2025 - 9:30 AM |