FS: Parting Out the Celica Options

[celicarus]

Hello All.

I got a great deal on a 98 GT Manual for my 3sgte project, so I will be parting out the 96 GT auto I have.

Parts that will not be parted out -
1) front bumper
2) hood
3) passenger fender
4) steering wheel
5) Air bag sensors
6) Tein SS & cusco mounts

Items Sold:[u]
side skirts - sold to kash1355 (paid)

other than that every thing else can go.

on another note - this car has a little over 210k miles on it - so the engine is not in its best shape

The only catch is I will still need the 96 for 3 more wks to drive around, but if there are parts that I can remove but still have car driveable than I can send right away. As far as price goes - shoot me reasonable offers here or pm or email me directly. Not really looking to make profit, but just wanted to get some $$$ back from the 98 that I purchased. Part Pics can be taken upon request. For shipping quotes go to UPS or www.usps.com (cheaper) and you can do the estimations from my zip 76012

Payments:
1) PayPal - hunnie4287@yahoo.com
2) Money Order - 435 Matt Ln - Arlington, TX 76012 (Scott Nguyen)

When Paying please put part description in comment field to ensure that you will be receiving correct part.
I will try to keep everyone updated as much as possible when items are ready to be send out so payments can be made.

just took these pics today












This post has been edited by celicarus: Apr 28, 2006 - 3:11 PM

[kash1355]

pm'd

[mywhite94celicag...]

how much for the center vents above the cd player?

[twolownissan2002]

hay i need the tails just let me know how much you want and how mush do you want for the pass side headlights plus clear truns lmk

[6th_celi_vert]

i really need the rear view mirror

[dagreat1]

washer nozzel (rear), Gear shifter knob, Gear shifter jacket, dash parts(the parts that pop out), glove part door, seats, **** i'll even take the gasket from the front part of the hood... oh and if that guy isn't serious about the rear view mirror i'll buy that too

oh and u have an auto so never mind about the knob and jacket

[3rdgen3s95]

PM'd

[brianforster]

how much for oem skirts?

[celicarus]

how much for the center vents above the cd player?

$15 +S/H

this i can send as soon as payment is made to hunnie4287@yahoo.com (Paypal)

[celicarus]

how much for oem skirts?

Skirts held For kash1355 - $60 + S/H
but I'll put u 2nd in line if kash1355 falls through

[celicarus]

washer nozzel (rear), Gear shifter knob, Gear shifter jacket, dash parts(the parts that pop out), glove part door, seats, **** i'll even take the gasket from the front part of the hood... oh and if that guy isn't serious about the rear view mirror i'll buy that too

oh and u have an auto so never mind about the knob and jacket

all dash parts that pop out except center AC vent (holding for kash1355)
$80
Glove box - $20
Seats - not in good condition - don't think you would want it
gasket from the front part of the hood ? -- not sure what that is
Rear view mirror - 2nd in line ( holding for 6th_celi_vert)

[fastcelica20]

pmd

[celicarus]

hay i need the tails just let me know how much you want and how mush do you want for the pass side headlights plus clear truns lmk

tail lights $60 for both
Passenger head light - only high is left - low holding for kash1355 - how about high? if kash falls through than ur 2nd in line

clear turn signal - $20 for both

[celicarus]

parts that i have replied to and confirmed pricing - that can be taken apart now -payments can be sent to hunnie4287@yahoo.com -PayPal- i trust that every one will include the right S/H amount provided by UPS when sending payment - but if you want to confirm feel free to pm or reply in this post and i will give you total cost. -- USPS shipping seems to be way cheaper - another option for shipping -

also make sure when sending payment include description of part just to make sure i will be sending the right part to the right person.

This post has been edited by celicarus: Apr 13, 2006 - 8:18 PM

[brianforster]

how much for oem skirts?

Skirts held For kash1355 - $60 + S/H
but I'll put u 2nd in line if kash1355 falls through

ok thanks

[twolownissan2002]

i need markers two

[pedzconcordia]

i need driver side high beam...
how much?
and also sunroof motor but i need pics of sunroof motor coz i got one before from 95ST but its different from what i have. i have 97..

[soltrain]

Is the center handrest part (the thing that flips up between the front seats) black leather? If so, I'd like it.
Also, if you look on the ceiling above the back seats, there should be three little plastic pegs holding the ceiling up, are they a kinda grey color? If so, I'd like those too.

Finally, does your trunk have the little black circle things covering up screw holes? Mine are missing

[celicarus]

i need markers two

markers on hold for yyet -- ur 2nd in line ($10)

[JFrost9]

Pm'ed, also would like to add to the list the tweeter triangular covers in the doors!!! Ill shoot you an offer for everything once you get back to me.

-Josh.

This post has been edited by JFrost9: Apr 13, 2006 - 8:43 PM

[celicarus]

i need driver side high beam...
how much?
and also sunroof motor but i need pics of sunroof motor coz i got one before from 95ST but its different from what i have. i have 97..

driver side high beam on hold for 6th_celi_vert -- $20 (2nd in line)
sunroof motor - will not take apart just yet - so when i do -i'll take pictures- ur 1st in line for that ($15)

[celicarus]

Is the center handrest part (the thing that flips up between the front seats) black leather? If so, I'd like it.
Also, if you look on the ceiling above the back seats, there should be three little plastic pegs holding the ceiling up, are they a kinda grey color? If so, I'd like those too.

Finally, does your trunk have the little black circle things covering up screw holes? Mine are missing

center handrest part - not in good condition - but black

they are tan

little black circle things covering up screw holes -- mines are missing too -

[cyb593]

pmed

[celicarus]

pmd

the things circled in red are those what your talking about --



also these are more pictures for everyone else to see - what things look like

[celicarus]

spread sheet that i created with what people have requested along with the price that was given --

if i forgot anyone let me know - this is what i have so far -

[dagreat1]

ok i'll take the glove box for the $20, um i dash part i wanted was actually the AC part, um the gasket is that black rubber thing that goes around the headlight and along the front of the hood, i was about to buy one, it might be hard to take off and u might rip it, so only give it to me if you are sure... um do u have floor mats?? and the 2nd he backs outta that rear veiw mirrow let me know and what about that rear washer nozzel... one other thing how much would you sell for you front driver side speaker?? i donno if i need one yet, mine just went out, it could be a wire but whats the price just in case....

ok where do i send the 20 dollars to?

[dagreat1]

can i also get in line for the fog lights, clear tunr light signals, the passenger window motor and the ashtray cup?? and do u happen to have the arm rest add on?? cuz i'll buy that too

and i wish i knew you were selling the rims for so cheap

[94st_santos]

sent you PM

[Nano]

I'd like the rearview as well, and can pay for it immediately

On a side note, i was hanging out with a few friends in arlington when i picked up my celi... They live offa mitchell.

[fastcelica20]

nice work celicarus. i like how you organized everything. kool yeah i want the front two if you have them. just let me know. thanks for the fast replies too!

[WALKER]

PM'd

[Outsider]

6) Tein SS & cusco mounts

more info on this please.

[celicarus]

ok i'll take the glove box for the $20, um i dash part i wanted was actually the AC part, um the gasket is that black rubber thing that goes around the headlight and along the front of the hood, i was about to buy one, it might be hard to take off and u might rip it, so only give it to me if you are sure... um do u have floor mats?? and the 2nd he backs outta that rear veiw mirrow let me know and what about that rear washer nozzel... one other thing how much would you sell for you front driver side speaker?? i donno if i need one yet, mine just went out, it could be a wire but whats the price just in case....

ok where do i send the 20 dollars to?

center ac vents spoken for by mywhite94celicagt - i'll put u 2nd in line
-- Low Beam DS rubber headlight seal spoken for by Jrost - the rest you can have for $8 + $4 (S/h)

Floor mats - only passenger side (dirty though
back mats - in good condition $15+ $5 (s/h) = $20 if you want - i'll go ahead and put u 1st in line for them
Rear wasjer nozzle - $5 s/h included if you get back mats and headlight seals

my ds speaker is out too - so you wouldn't want it

you can paypal at hunnie4287@yahoo.com or money order to 435 Matt Ln - Arlington, TX 76012 (Scott Nguyen)

[celicarus]

I'd like the rearview as well, and can pay for it immediately

On a side note, i was hanging out with a few friends in arlington when i picked up my celi... They live offa mitchell.

rear view mirror (3rd in line)
-- i live like 5 minutes away from UTA -- yeah there are a couple of celica drivers around here - pretty good community we have here -

[pedzconcordia]

i need driver side high beam...
how much?
and also sunroof motor but i need pics of sunroof motor coz i got one before from 95ST but its different from what i have. i have 97..

driver side high beam on hold for 6th_celi_vert -- $20 (2nd in line)
sunroof motor - will not take apart just yet - so when i do -i'll take pictures- ur 1st in line for that ($15)

celicarus just inform me when you take apart the sunroof and email me some pix, you can PM me or email me at pedz_5@yahoo.com ...
also if 6th_celi_vert didnt take the driver side high beam hit me up too, therefore i can send payment to your paypal account..
thanks

[brianforster]

metal ac lines and ac condensor (thing behind the radiator)

price?

[celicarus]

metal ac lines and ac condensor (thing behind the radiator)

price?

how does $50 sound?

[mywhite94celicag...]

pmd about the ac vents. when u get around to takin your other stuff apart, shoot me a price on the entire sunroof assembly with wiring and switch. i noticd the one guy already spoke for the motor and thats fine. shoot me a price for all that, including the headliner. can u send me some pics of the headliner, cause im sure i can cut mine to fit but id rather not. send pics to treyhester@yahoo.com. thanks

[bloodrain]

how much for the rotors?

[celicarus]

how much for the rotors?

how about $30 for all 4

[brianforster]

metal ac lines and ac condensor (thing behind the radiator)

price?

how does $50 sound?

sounds great! shipping will be to 20636, these seem like parts you wont take off untill your completely done with the car so thats totally fine, just PM me when you have them ready for shipping!

[Flyinghumanoid]

If dagreat1 doesn't take the passenger window motor, how much for both driver and passenger side power window assemblies?

[CelicaZR]

6) Tein SS & cusco mounts

more info on this please.

I'm also interested

[JFrost9]

Hello All.

I got a great deal on a 98 GT Manual for my 3sgte project, so I will be parting out the 96 GT auto I have.

Parts that WILL NOT be parted out -
1)front bumper
2) hood
3) passenger fender
4) steering wheel
5) Passenger side headlights
6) Tein SS & cusco mounts

other than that every thing else can go.

on another note - this car has a little over 210k miles on it - so the engine is not in its best shape

The only catch is I will still need the 96 for 3 more wks to drive around, but if there are parts that I can remove but still have car driveable than I can send right away. As far as price goes - shoot me reasonable offers here or pm or email me directly. Not really looking to make profit, but just wanted to get some $$$ back from the 98 that I purchased. Part Pics can be taken upon request. For shipping quotes go to UPS and you can do the estimations from my zip 76012

guys read that post again, its #6 among the list of things he is keeping, so chances are you being interested doesnt do alot of good lol....

[Celicav]

How about the sunroof visor thing? It looks stylish. Is it stock? In good condition? How much? Thanks.

[beastman]

I need the door handle plastic pieces. You know the pieces that go behind the handle itself. Both sides. Let me know.

[celicarus]

How about the sunroof visor thing? It looks stylish. Is it stock? In good condition? How much? Thanks.

1st in line for that - yes in good condition - and stock - $15 - need zip code to confirm s/h cost through usps

I need the door handle plastic pieces. You know the pieces that go behind the handle itself. Both sides. Let me know.

both for $10 - need zip code to confirm s/h cost through usps (1st in line)



----------------------------------------------

Side Skirts Sold to kash1355 (paid)

This post has been edited by celicarus: Apr 15, 2006 - 12:50 PM

[AMCMoe]

How much do you want for these pieces? The plastic things that the screws go into on my bar broke and the piece comes up instead of staying down. So I'd like a new bar. I assume it's to keep water out.



Also, this plastic piece that the bar attaches to broke, I'd need this piece as well. The left side, if it matters.



Sorry for the over-exposed pictures..someone was messing with my camera.

[beastman]

QUOTE(beastman @ Apr 15, 2006 - 11:23 AM)

I need the door handle plastic pieces. You know the pieces that go behind the handle itself. Both sides. Let me know.



both for $10 - need zip code to confirm s/h cost through usps (1st in line)

60439 is the zip code and PM your paypal and final price to me. Thanks.

[Nano]

Could i also get your mud guard, if its in good condition?

[celicast3sgte]

hey, when u take the car down, quote me on a price for throttle cables incase my other lead for the parts goes thru. thanks!

[dagreat1]

If dagreat1 doesn't take the passenger window motor, how much for both driver and passenger side power window assemblies?

yoou can take it, something is wrong with my passenger window, but i dont' think its the motor

ok i'll take the glove box for the $20, um i dash part i wanted was actually the AC part, um the gasket is that black rubber thing that goes around the headlight and along the front of the hood, i was about to buy one, it might be hard to take off and u might rip it, so only give it to me if you are sure... um do u have floor mats?? and the 2nd he backs outta that rear veiw mirrow let me know and what about that rear washer nozzel... one other thing how much would you sell for you front driver side speaker?? i donno if i need one yet, mine just went out, it could be a wire but whats the price just in case....

ok where do i send the 20 dollars to?

center ac vents spoken for by mywhite94celicagt - i'll put u 2nd in line
-- Low Beam DS rubber headlight seal spoken for by Jrost - the rest you can have for $8 + $4 (S/h)

Floor mats - only passenger side (dirty though
back mats - in good condition $15+ $5 (s/h) = $20 if you want - i'll go ahead and put u 1st in line for them
Rear wasjer nozzle - $5 s/h included if you get back mats and headlight seals

my ds speaker is out too - so you wouldn't want it

you can paypal at hunnie4287@yahoo.com or money order to 435 Matt Ln - Arlington, TX 76012 (Scott Nguyen)

could u gimmie a final total with shipping and everything? don't do ups do usps and then i'll pay yo uafter everything goes through, and thats ok ill just buy floor mats

[celicarus]

How much do you want for these pieces? The plastic things that the screws go into on my bar broke and the piece comes up instead of staying down. So I'd like a new bar. I assume it's to keep water out.



Also, this plastic piece that the bar attaches to broke, I'd need this piece as well. The left side, if it matters.



Sorry for the over-exposed pictures..someone was messing with my camera.

$10 for both pieces -

QUOTE(beastman @ Apr 15, 2006 - 11:23 AM)

I need the door handle plastic pieces. You know the pieces that go behind the handle itself. Both sides. Let me know.



both for $10 - need zip code to confirm s/h cost through usps (1st in line)

60439 is the zip code and PM your paypal and final price to me. Thanks.

$15 total paypal - hunnie4287@yahoo.com

Could i also get your mud guard, if its in good condition?

on hold for another buyer

hey, when u take the car down, quote me on a price for throttle cables incase my other lead for the parts goes thru. thanks!

$20 -

'Flyinghumanoid' - you have been bumped up to 2nd in line for passenger window motor assembly - driver side also 2nd in line

---------------------------------------------------------------------------------------------

you can paypal at hunnie4287@yahoo.com or money order to 435 Matt Ln - Arlington, TX 76012 (Scott Nguyen)

Dagreat1
could u gimmie a final total with shipping and everything? don't do ups do usps and then i'll pay yo uafter everything goes through, and thats ok ill just buy floor mats

Rear Washer Nozzle - $5
Glove Box - $20
head lights rubber seal + front hood rubber seal(except for DS low beam) - $8

not sure if i have your zip code to confirm shipping - but it'll proabably cost $15 for shipping
so total would be $48.00 -

[K-ESD]

is the center console plastic trim still available? (trim around deck)
also i'd like the gauge cluster and the a/c control if they are available


lmk, thanks

[celicarus]

is the center console plastic trim still available? (trim around deck)
also i'd like the gauge cluster and the a/c control if they are available


lmk, thanks

center console plastic trim $10.00
gauge cluster $15.00
ac control $15.00


1st in line for all 3 pieces

[celicarus]

see page 1 for an updated list of whats on hold and for who along with price given --

[95celgt]

i guess you can put me 2nd in line for the metal AC lines...

[brianforster]

i still plan on buying the ac condensor + metal lines just waiting on the car to actually be torn down

also on your spreadsheet you have me down as 2nd in line for side skirts but its not actually under my name

how much would you want for the 2 pieces the crash bar mounts to? they slide into the frame and are held in by 2 bolts each.

[celicarus]

i still plan on buying the ac condensor + metal lines just waiting on the car to actually be torn down

also on your spreadsheet you have me down as 2nd in line for side skirts but its not actually under my name

how much would you want for the 2 pieces the crash bar mounts to? they slide into the frame and are held in by 2 bolts each.

glad u caught my mistake - though i would of figured it out -

i may need those 2 pieces for the 98 -- not sure yet until the 98 arrives --

on another note -- does anyone have any information on shipping to canada from the US -- the rate quotes I'm getting from DHL and UPS are over $100 -- more than what the item cost -- after speaking to the representatives - they said they only use one international rate, which is express - no standard, no ground - nothing cheap -- thats hard to believe --

and USPS - won't accept my package saying the size is more than what they can handle - and if i choose to go through with it - the surcharge will be very high

any suggestions from the canadian community is appreciated --

what i'm trying to ship off are my side skirts to kash1355

[95celgt]

how much for the hatch panel door? the door that you open for access to the jack?

also the entire rear interior hatch panel(covers the area for taillights...

[Shocker]

how much for the antenna mast???? i dont need the motor.

[dagreat1]

how much for the antenna mast???? i dont need the motor.

ok so what did i get and how much do i owe? i'll take the rear floor mats too
zipcode is 33463

[hollywoodred]

Hi:

New to forum, and glad to find you.

I need a convertible boot for my 1995 Celica GT. Black. I have found one or two on e-bay but they will not fit that year. Toyota wants almost $800 for one, which is ridiculious.

Would 1996 model fit 1995 - that is, if your 1996 is a convertible?

Thanks-
Diana
Los Angeles

[celicarus]

how much for the hatch panel door? the door that you open for access to the jack?

also the entire rear interior hatch panel(covers the area for taillights...

$5 - hatch panel (jack)
$10 - cover for taillights

how much for the antenna mast???? i dont need the motor.

if you are refering to the top part - than $4

how much for the antenna mast???? i dont need the motor.

ok so what did i get and how much do i owe? i'll take the rear floor mats too
zipcode is 33463

Rear Washer Nozzle $5.00
Glove Box $20.00
head lights rubber seal + front hood rubber seal(except for DS low beam) $8.00
rear floor mats $8.00

estimated to be 7lbs total -
Parcel Post 5 Day(s) $10.91 = total $53

Hi:

New to forum, and glad to find you.

I need a convertible boot for my 1995 Celica GT. Black. I have found one or two on e-bay but they will not fit that year. Toyota wants almost $800 for one, which is ridiculious.

Would 1996 model fit 1995 - that is, if your 1996 is a convertible?

Thanks-
Diana
Los Angeles

nope not a convertible - hatch

[Michelle95celica]

I need the inner plastic wheel well shield for the front drivers side, as well as a (preferably black) back seat & all mounting hardware/clips, and the carpet or other material that goes on the trunk floor, sides, and along the inner back wall behind the taillights. My car is completely stripped starting behind the front seats, and I have no idea what the stock materials look like that cover up the trunk area on a GT Hatchback. Got any pics?? Like from the back w/ hatch open, and the back seat? I also may need a sunroof motor (I have a '95)....would I need one is the sunroof tilts up & back down but doesn't slide back? Is it supposed to?

[jdg371]

How much would the inner wheelwell plastic Front Right. and both tweets? zip-23464

[celicast3sgte]

you said 20$ for the throttle cables. shipped or non-shipped? 98036 PM me if you can please.

[JFrost9]

Hi:

New to forum, and glad to find you.

I need a convertible boot for my 1995 Celica GT. Black. I have found one or two on e-bay but they will not fit that year. Toyota wants almost $800 for one, which is ridiculious.

Would 1996 model fit 1995 - that is, if your 1996 is a convertible?

Thanks-
Diana
Los Angeles

arent all year convertibles the same? I could have sworn that toyota said that the top could replaced from any year car.... Goodluck finding one of those boots, they are super rare, and super expensive.

Celicarus, im not sure when you can get the things i need, but just let me know whenever you get the chance to remove them and ill pay ya for em.

This post has been edited by JFrost9: Apr 18, 2006 - 9:22 PM

[airfron]

How much for the hatch lift supports? Mine are so bad that when i got pulled over the other night a cop was searching my car and she opened the hatch looked in the trunk only to have it fall down and knock her unconscious.... her partner was pissed and yelled at me for not warning her.

[celicarus]

I need the inner plastic wheel well shield for the front drivers side, as well as a (preferably black) back seat & all mounting hardware/clips, and the carpet or other material that goes on the trunk floor, sides, and along the inner back wall behind the taillights. My car is completely stripped starting behind the front seats, and I have no idea what the stock materials look like that cover up the trunk area on a GT Hatchback. Got any pics?? Like from the back w/ hatch open, and the back seat? I also may need a sunroof motor (I have a '95)....would I need one is the sunroof tilts up & back down but doesn't slide back? Is it supposed to?

F DS wheel well - $5 (not including s/h) need zip code
Tan & black interior - seats & carpet are all tan - side interiors are all balck (i'll get pics 2morrow)
sunroof motor - 2 other people in line - mine goes up & down & can slide all the way back

How much would the inner wheelwell plastic Front Right. and both tweets? zip-23464

Passenger side - wheel well $5 - usps shipping $6.02
Tweeters - about 2 or 3 other people in line $10

you said 20$ for the throttle cables. shipped or non-shipped? 98036 PM me if you can please.

+ $7.59 for shipping through usps

Hi:

New to forum, and glad to find you.

I need a convertible boot for my 1995 Celica GT. Black. I have found one or two on e-bay but they will not fit that year. Toyota wants almost $800 for one, which is ridiculious.

Would 1996 model fit 1995 - that is, if your 1996 is a convertible?

Thanks-
Diana
Los Angeles

arent all year convertibles the same? I could have sworn that toyota said that the top could replaced from any year car.... Goodluck finding one of those boots, they are super rare, and super expensive.

Celicarus, im not sure when you can get the things i need, but just let me know whenever you get the chance to remove them and ill pay ya for em.

i don't remember getting your zip code (i may of lost it) but i would estimate 7lb shipping within TX to be $15 through usps
drivers side rubber seal (for lowbeam headlight) $2.00
tweeters $10.00
Harness $80.00
total to be - $107 -- harness i cannot send yet until 2 wks from now - so you might want to wait to send payment - unless u need the tweeters and rubber seal right away

How much for the hatch lift supports? Mine are so bad that when i got pulled over the other night a cop was searching my car and she opened the hatch looked in the trunk only to have it fall down and knock her unconscious.... her partner was pissed and yelled at me for not warning her.

there's another person in line for that u'll be 2nd i believe i quoted the other person $10 for both -- i'll have to get back to you after i double check the updated spread sheet on my other pc -

thats one funny story -- i was laughing crazy just imagining it - that should be on the cops show - hahha

[95celgt]

$5 - hatch panel (jack)
$10 - cover for taillights

shipping to 78045?

[JFrost9]

If for some reason those guys fall through on the wheel wells, Id love to pick both front ones up.

[celicarus]

$5 - hatch panel (jack)
$10 - cover for taillights

shipping to 78045?

total $27 including shipping ($6 shipping - $6 for me to get a box big enough)

If for some reason those guys fall through on the wheel wells, Id love to pick both front ones up.

$10 for both - 2nd in line -

[celicarus]

my mailbox may get full - so post here if it does --

if i forgot to reply to anyone - please PM me again or repost in here

[tomazws]

So far I'm very happy with this seller. I just purchased something really cheap and un-important but he treats his customer very nicely.

[95CelicaST]

Do you have the armrest cover and all the hinge hardware?

[kash1355]

So far I'm very happy with this seller. I just purchased something really cheap and un-important but he treats his customer very nicely.

Agreed! He did a lot of work (i.e. finding many quotes), not to mention an unnecessary trip to USPS just so he could get the skirts shipped to me.

[sugarfree]

This is probably going to be a hard request, but if you cant do it dont worry about it. Im lookin for the passenger side inner tie rod.

[celicarus]

Do you have the armrest cover and all the hinge hardware?

i removed the leather part of mine because it was in bad shape - so not available

This is probably going to be a hard request, but if you cant do it dont worry about it. Im lookin for the passenger side inner tie rod.

i'm sure i can get it apart - but it has over 210k miles on it - ur better off getting a new one - but if you want its urs for free if you want to come help me take it out when the time comes

----

oh and thank you for the compliments guys

This post has been edited by celicarus: Apr 19, 2006 - 5:28 PM

[sugarfree]

i probably will, but Son the guy you met, knows how to do it. Whens the next day your off from work?

[celicarus]

i probably will, but Son the guy you met, knows how to do it. Whens the next day your off from work?

my days off are Fridays and Saturdays -- we could get together and chill if you want - but i need the inner tie rod to drive around for 2 more wks --

in the process of ordering parts for the 98 including GT4 bumper, hood, and headlights - trying to do a full gt4 exterior conversion -

[94st_santos]

Do you have power mirrors. If you do I'm interested in the drivers side mirror.

[celicarus]

Do you have power mirrors. If you do I'm interested in the drivers side mirror.

yes power mirrors - (i though all of our cars came with power mirrors) - $15

[XS4lv1Truch0x]

are you selling the foglights with the assembly or wutever... would they fit in my bumper? its stock and its different....

ima ask the mother for the money and shipping so i think i might buy it, put me down on the list just in case...

This post has been edited by XS4lv1Truch0x: Apr 20, 2006 - 2:49 PM

[sugarfree]

Man im off today and tomarrow also. yea we should meet up, but Son says that hes going to try to wake up early Sat. Man so you need it for 2 more weeks? Oh well, we should meet up anyways. Ill call him tonight, he says hes at work today, but im a call him anways.

[94st_santos]

yes power mirrors - (i though all of our cars came with power mirrors) - $15

sounds good I'll take that too.

[morbiddelusions]

Hey did anyone get the markers and turns yet
was wondering i saw they were on hold if they fall through
pm me with total zip is 30815
thnx

[JFrost9]

Just thought id let you know i got my stuff in on thursday. Everything looks great....When it gets down to the very end of this parting out, i may have to swing by and grab the front windshield if yours isnt cracked like mine.

This post has been edited by JFrost9: Apr 23, 2006 - 11:38 AM

[celicarus]

Just thought id let you know i got my stuff in on thursday. Everything looks great....When it gets down to the very end of this parting out, i may have to swing by and grab the front windshield if yours isnt cracked like mine.

thanks for the update - mine has 2-3 circle chips - not very noticeable - but you can have it if you swing by -

Hey did anyone get the markers and turns yet
was wondering i saw they were on hold if they fall through
pm me with total zip is 30815
thnx

yeah there are 3 or 4 people in line - if they fall through - i'll pm you

[morbiddelusions]

Ok cool thanks.

[celicarus]

if i forgot to reply to anyone regarding their request -- let me know cause i think i forgot to reply to 1 person, but forgot who --

[mywhite94celicag...]

i had asked for the hatch struts if they hold the hatch up? but i dont know if anyone else already spoke for them.

[mportobello]

How much for the wiper blade assembly? Thanks.

[celicarus]

Just got a call today from the shipping service saying that the 98 will arrive next Tuesday -- fro NY to TX -- door to door cost me $680 -- man I can't wait -- its like getting a new car all over or the 1st car joy kinda thing --

this will be so fun -- my 96 always had this bothersome whirling noise in the rear - and too many other small problems that would of cost me too much to fix --

got the 98 for $750 with minor front collision damage - but nothing mechanically wrong -- will be swaping some parts from the 96 to the 98 to then comes the 3sgte - will be going down to superiortradinginternational.com to pick up the beast 2 wks from now -- also a complete paint job going from oem red to metallic gray --

[yyet]

so how soon will we be getting our parts??? not to sound impatient or anything

Yet

[celicarus]

so how soon will we be getting our parts??? not to sound impatient or anything

Yet

the parting out will begin next Friday and Saturday (my days off)- so for those who remain interest to the parts they wanted and were informed that they were 1st in line - you can proceed with payments come next Friday -- parts that are a little difficult to take apart may be shipped out the wk after , which will be the 8th or 9th of May -- Not every one provided me their zip code so I assume you all did the shipping estimations yourself, which is fine, but if I end up being short when I get ready to ship your parts out - I will pm to let those know. My zip code is 76012 - help me out by doing the estimations yourself - but you can always pm me or within this post to confirm. Prefered Method of Payment is thru Paypal at hunnie4287@yahoo.com Every item shipped will have a tracking # - so after your packages are sent out - i will do my best to pm you all the same day or day after.

2morrow I will upload an updated copy of the excel spreadsheet on page 1 around 3pm cst- so please refer to page 1 to confirm which parts you are getting and what the cost were. My mailbox will most likely be full around payment time. There were many request for parts, so please bare with me as I try to make everyone happy. If I don't respond to pms or requests within 1 day - feel free to repost or re-pm (email - scottkun@gmail.com)

-- edit -- FYI i will use the cheapest shipping option available through USPS to save you guys money on shipping - unless I am informed other wise

This post has been edited by celicarus: Apr 26, 2006 - 10:14 PM

[Valo666]

u still have the rear ashtray peices avilble? like the metal insert for the center console and the actual plastic tray? I need one bad and dont wanna pay from the dealer.

[celicarus]

u still have the rear ashtray peices avilble? like the metal insert for the center console and the actual plastic tray? I need one bad and dont wanna pay from the dealer.

i do have it - $5.00 if you want -

[yyet]

Driver side tweeter cover still available??? And i was 2nd in line for the foggies... Did i win!?!

Yet

[celicarus]

Driver side tweeter cover still available??? And i was 2nd in line for the foggies... Did i win!?!

Yet

-so far all those who were told 1st in line for parts have not informed me that they want to back out on their parts - Kash1355 is 1st for them -- and has not backed out -- tweet cover were sold and shipped sorry

the only things i have down for you is the
passenger window motor & side markers

-- side skirts were sold

This post has been edited by celicarus: Apr 27, 2006 - 7:07 PM