Installed JDM Headlights, new pics added Options

[elvasoshexai]

man.. i just spent 4hours installing my damn JDM headlights today (9pm-1am)... it really SUX working @ night

after everything was done... i had like:

-5+ bolts leftover...
-ended up with 2 clips that fell out from somewhere.. (no clue where)
-was missing 1 of those push-pin type thing
-1 of the nuts that go against the fender wouldn't tighten
-1 of the bolts under the car, the hole was messed up because of a rusted bolt and wouldn't go in anymore...

so think it's still ok to with all these extra parts not back on the car? (like my bumper or that plastic thing udner the car won't just fall out while driving at high speeds? hah

had the lowbeams retrofitted with OEM TSX HID Projectors and so the beam pattern is for LHD. Painted the projector part black to prevent glare.
Can't believe how BRIGHT it is with these HIDs

some daytime pics of the lights:





here are some night pics:

the following 6 pics show the headlight from different height (it goes from regular colour to blue/purple-ish)












the following pictures show the beam pattern... i think i still need to work on aiming the headlights a bit. i didn't have enough room to move further back to show it better

first 4 are w/o flash








with flash:


This post has been edited by elvasoshexai: Jul 2, 2006 - 11:56 PM

[nader]

lets see some pics!!!!!!!!

[Predator]

maybe one of those clips fits the fender so you can tighten it

This post has been edited by Predator: Jul 1, 2006 - 3:27 AM

[Kadett]

I just did not put the plastic trim under the car back on. 2/5 nuts/clips were rusted and the times a took of my bumper I'd rather remove only 10 nuts/bolts instead of 15 (also did not replace the 4 pushins with brackt on crashbar.

[azian_advanced]

awesome.. those jdm lights are probably one of the most expensive exterior mods for our cars. you plan on doing the LHD conversion?

btw, the clips might've come from the bottom of the bumper, where it holds the front lower splash guard with the front bumper.

also where did you buy your harness for the low beams?

[Akimbo]

great job.

[elvasoshexai]

awesome.. those jdm lights are probably one of the most expensive exterior mods for our cars. you plan on doing the LHD conversion?

btw, the clips might've come from the bottom of the bumper, where it holds the front lower splash guard with the front bumper.

also where did you buy your harness for the low beams?

hm.. yea maybe those clips did come from the lower splash guard... it came out while i was opening it to get the fender nuts... but it's so much work to put them back i'll probably put it back the next time i remove my bumper. hah... i guess if it's not too big a deal i'll just leave most of those bolts off

yea.. these headlights are probably the most expensive things i've bought so far...

i made a thread in interior a long time ago about my oem tsx projector retrofit... so basically i got HIDs... so no need for LHD conversion =) and the place that did my retrofit made me a wiring harness that was plug and play into the 9006 socket...

the beam pattern is incredibly sharp... and the road is SOOO bright... i love it lol


if you go to www.customlightz.com and go to the multimedia->pictures and look for the 98 celica.. that's mine

[bloodrain]

thats all the parts your missing? lucky, when i was done with my bumper and fenders I had about 20 pieces extra, lol. but you know what they say "if you dont have extra parts, you didnt do it correctly" lol

[twolownissan2002]

so how much did you pay for only the low beams and that place makes them there not jdm are they?

[dustin15brown]

so how much did you pay for only the low beams and that place makes them there not jdm are they?

Read the thread title.... Although if I remember correctly someone took out the regular projector ballast and installed an Acura Tsx/Rsx? ballast.... Thus making the front part black? Also they have HID's... Right?

[DSRT-FX]

hey elvasoshexai, the projectors look pretty damn sexy! one of the best and professional modifications i've seen with the jdm projectors... although i still favour the non-modified projectors with pure HID's i think you've done a great job. too bad you didnt tell them to put a ring around the projectors so we can have a professional looking angel eyes like the BMW's and Mercs. post pics of the lights at night please...-R

[elvasoshexai]

hey elvasoshexai, the projectors look pretty damn sexy! one of the best and professional modifications i've seen with the jdm projectors... although i still favour the non-modified projectors with pure HID's i think you've done a great job. too bad you didnt tell them to put a ring around the projectors so we can have a professional looking angel eyes like the BMW's and Mercs. post pics of the lights at night please...-R

thnx... i wanted to get some pics last night but it kept raining...

i had the chance to put angel eyes. but i didn't get them.. jsut thought it looked weird on a car that already had 4 eyes

so how much did you pay for only the low beams and that place makes them there not jdm are they?

Read the thread title.... Although if I remember correctly someone took out the regular projector ballast and installed an Acura Tsx/Rsx? ballast.... Thus making the front part black? Also they have HID's... Right?

yep. i've got TSX projectors with Matsu****a Ballasts (i think these are the smallest ballasts out there). The black part was just painted

This post has been edited by elvasoshexai: Jul 2, 2006 - 10:57 AM

[princemb]

Se le ven HERMOSAS!! felicidades!! buen trabajo!!