shift light issues Options

[Griff]

ah! someone gave me a gift, a shift light
http://www.cardomain.com/item/ATM5332
and...it takes some rpm module or a huge flippin tach to make it work?
is that right? so another 80 bucks for a module?
i thought it was going to have a few wires, i would connect some power...some ground and one to the tach...and it came with a end that needed to plug into somthing...can anyone point me in the right direction? thanks

[tufy]

you can connect it directly to ecu. with 3 wires ..power, ground. and ignition rpm wires.. but you need you cars ecu wiring diagram. do you have a cataloge of your shift light?
if not tell me to send you

[Griff]

i dont, please send. thanks

so you saying i should cut off the female end of the shift light and it should have 3 wires i can run to those 3 things?

thanks for help

[tufy]

i dont, please send. thanks

so you saying i should cut off the female end of the shift light and it should have 3 wires i can run to those 3 things?

thanks for help

here is wiring or 3sge for şhift light


This post has been edited by tufy: Jul 24, 2006 - 7:00 AM