Meshin, how do i do it Options

[Hongy]

just brought myself som black meshing, but the thing is, i dont know how to stick it on properly. like i have no idea, do i glue it on with som sort of super glue, do i make som sort of bracket for them, is it a combination of both? is it somthing totally different?
ne help/pics/links would b good

thnx

[Sh0gunkid8721]

im guessing that u mean the meshing for ur front bumper...but people do it different ways...some ziptie it to the posts or others use wire...they buy wire...strip it...take the copper wiring and just tie it to the posts with that.

[Hongy]

yeh sry, it was for my front bumper.

ziptie, never thought of that ay, im gonna go take my bumper off now n see if that can work

cheers

[Bitter]

poprivet, then paint the rivets with touchup paint to match the car.

[6gsillyca]

+1 for zipties

[Hongy]

man gettin the bumper off in the first place is a pain in the ass. dont know how u guys did it without ne trouble.

any 1 got a detailed pic on where they positioned their mesh inside?

This post has been edited by Hongy: Oct 2, 2006 - 3:32 AM

[Shocker]

use epoxy and place and place wires in the eboxy do that a round the opening on the inside of the bumper..then let that dry..then pace your mesh where you want it the put the wires through the hole and loop them to hold it on...if you can understand that..its the best way to do it..
id show you pics but dont have a camera and im at school

[Sh0gunkid8721]

man gettin the bumper off in the first place is a pain in the ass. dont know how u guys did it without ne trouble.

any 1 got a detailed pic on where they positioned their mesh inside?

u dont have to remove the front bumper. if u want the mesh behind the posts, just remove the plastic thing under the car and just reach under.

This post has been edited by Sh0gunkid8721: Oct 2, 2006 - 12:19 PM

[Hongy]

its too late, already took the bumper off...lol
gues it will make it alil easier now to stick meshin on

ill proly do it ur way shocker, sounds the easiest with the epoxy and wire.

[celiracer]

With my stock bumper i drilled holes behind the black bars and used black zip ties to tie them on. Can't even see the zip ties

[Hongy]

all good ideas

just got back from work, so ill try n finish it off tonight after dinna

thnx for all the ideas guys, ill let uz know how it all goes

[Toyoca]

i just popped open my hood and stuck it down there manually. then zipdied it from the front. theres a little gap for me on the top between teh mesh and the bumper but u cant notice it unless youre down there. ill take sum pics when i go home.

[Hongy]

took me awhile, but got it lookin snug

added holes to fit my fogs


this is wat it looks like on the car with the fogs


wat do uz think of the black meshin job?


btw thnx for all ur help guys

[Coomer]

Looks good...I'd like to see the full front of the car during the day with the new grill on.

[kCed]

whered you get that black mesh...

[Hongy]

u can pretty much get the black mesh from any general auto store. its the 'saas' product range of meshin, if the auto place dont have em they can prolly order it in for ya cause its pretty common.

[CelicaZR]

Looks good bro
I'm diggin it!!!