Exhausts, Post your exhaust here Options

[QuintinGT]

I've been looking for an exhaust, and I think it would be helpful if we had an exhaust thread. I know there are some scattered around but it would be nice if we could get it all in one place. I want to hear different exhausts on the celica. So if you have a sound clip, video and even pictures post them so me and others can see whats available.
Thanks

Ill start. here is netrata's, Im not sure what it is.

Here man, I managed to get a few pics and even a vid clip of my exhaust to show you what I did. I hope it helps; and don't mind the undercarriage, it looks like rust under the car but it's really not. It's that unavoidable red dirt we got on our roads that made it look that way .



click link below:
http://www.youtube.com/watch?v=_8mxdjwRkJo

And a Greddy sp2, not sure whose car looks like Lagos
Sp2

And another im not sure what it is

http://vids.myspace.com/index.cfm?fuseacti...9067726&n=2

If I have already posted your exhuast it would be awsome if you could tell us what it is.

[ExSane]

I'll have mine posted up tomarrow while I work on my neon lights. I'm trying to do a Before/After thing with my exhaust becuz I don't have a header yet and I plan on getting a new muffler.

Oh yeah, your exhaust sounds very similar to a Magnaflow.

UPDATED: Here it is guys! http://www.youtube.com/watch?v=YmBXrbgX6r8

This post has been edited by ExSane: Oct 19, 2006 - 9:55 PM

[Bitter]

http://youtube.com/watch?v=jtDfh_dJriY

[Jaws4God]

2 1/4" Custom Cat Back with MagnaFlow Muffler







This post has been edited by Jaws4God: Oct 19, 2006 - 9:19 AM

[manphibian]

Custom made stainless system with 4" Rolled tip with perforated inner lining

[phonex98]

Custom made stainless system with 4" Rolled tip with perforated inner lining

What does perferation do for your exhaust sound ?

This post has been edited by phonex98: Oct 19, 2006 - 12:06 PM

[6gcSTVT]

Does anyone know the size specs on the greddy sp2 muffler? My local shop is giving me prices and i chose the sp2 but i don't have in in my possesion nor can i find the W x H x D

[manphibian]

The peforations give that Deep throaty exhaust note when idling, caused when the air rushes over the holes. Kinda like when you blow across the top of a beer bottle.

Sounds Awesome

This post has been edited by manphibian: Oct 19, 2006 - 12:43 PM

[netrata]

This is my exhaust setup:
2.5" mandrel bent custom piping made by local exhaust shop
Magnaflow 2.5" in/out catalytic converter from summit-racing
Magnaflow 2.5" in/out round resonator muffler from summit-racing
Megan Racing N1 muffler 2.5" in/out from ebay

Profile has rest of specs on the Celica.

[airfron]

2.25" Catback with a Tanabe Super Medallion Racing 60mm inlet/ 90mm outlet muffler




vid clip
http://s49.photobucket.com/albums/f261/air...¤t=MVI_0763.flv

[Valo666]

My old exhaust set up: 2.5" stainless with Vibrant performance resignator, APC stubby muffler. REALLY loud system.


New Exhaust system 2.25" Full staindless manderal bent exhaust from headers back with Magnaflow highflow cat *inline*, vibrant performance 2.25 12" highflow resignator to Magnaflow muffler with dual rolled tip.


ill take some newer.better looking pics tomorrow.

[ExSane]

Alright guys. Here it is! Here is my exhaust. It was too loud for the camcorder while revving, the camcorder had to lower the recorded volume. LOL. I just recorded it today. Check it out.

http://www.youtube.com/watch?v=YmBXrbgX6r8

NO Header
Custom 2.25" Cat-back with Otto-R Muffler 2.5" inlet / 3.5" outlet




This post has been edited by ExSane: Oct 19, 2006 - 10:40 PM

[playr158]

New Exhaust system 2.25" Full staindless manderal bent exhaust from headers back with Magnaflow highflow cat *inline*, vibrant performance 2.25 12" highflow resignator to Magnaflow muffler with dual rolled tip.

lmao....is there an "out of line" high flow cat


so this doesn't count as an unneccisary post here is a pic

2.5" straight through cf cannon with 4" angle cut tip

[celicaST]

video of mine

[giang723]

this is mine, mind u don't take any notice of the other noise http://www.youtube.com/watch?v=I6agJp79u5k

[shin]

this is pic of mine. http://www.6gc.net/photo/member/2988/8
not the best one but yea... it's tanabe racing medallion with 2.5" crush bent piping
here's video of how it sounds.
http://www.youtube.com/watch?v=Hm2kaQJyOys

[soulshadow]

OMG, I have a straight pipe for a muffler and its loud as he11 I am in my own league when I rival the local V8 350's in a ear breaking gas eatting muffler contest. My gas mileage as it stands now is 15 to the gallon of PREMIUM gas PREMIUM GAS! I think Im going deaf so im putting in a new muffler this week, any guess on what kind it is?

Lets just say that 2 of my friends backed off from the car when I revved it.

This post has been edited by soulshadow: Oct 22, 2006 - 10:32 PM

[Bitter]

muffler wont kill the milage, how you drive will.

[Valo666]

New Exhaust system 2.25" Full staindless manderal bent exhaust from headers back with Magnaflow highflow cat *inline*, vibrant performance 2.25 12" highflow resignator to Magnaflow muffler with dual rolled tip.

lmao....is there an "out of line" high flow cat [img]

I ment inline as in its not attached to the manifold as a factory one does. Its located inline with the exhaust system just after the flex pipe.

[n1ckz0r]

The downpipe I have is too small. It looks really restrictive. like around 1 3/4 or maybe 2. I know its definetely not 2.25 which is what i wanted. I was wondering if I cut the end of it, were it goes from 2-1 could i have the shop just weld on so its 2.25 ALL the way through to the muffler?

[Bitter]

The downpipe I have is too small. It looks really restrictive. like around 1 3/4 or maybe 2. I know its definetely not 2.25 which is what i wanted. I was wondering if I cut the end of it, were it goes from 2-1 could i have the shop just weld on so its 2.25 ALL the way through to the muffler?

its larger than stock, it'll be fine. 2.25 is a little large for the stock HP of the car anyways. ideal is right around 2 inches, trust me it'll be just fine.

[Alex-UKSC]

Tanabe Hyper Medallion Full Exhaust System

[shin]

did you cut the tip of your muffler? btw, i just looked into your profile. nice rims & hot chick

[presure2]

3" turbo back
3"X8" flex pipe
no cats or resonators
under axle to a magnaflow race 3" inlet, 4" double walled tip.








heres a vid on youtube:
http://www.youtube.com/watch?v=zFRwgBipDZc

[elvasoshexai]

New Exhaust system 2.25" Full staindless manderal bent exhaust from headers back with Magnaflow highflow cat *inline*, vibrant performance 2.25 12" highflow resignator to Magnaflow muffler with dual rolled tip.

where'd you get it done? how much?

[n1ckz0r]

http://www.youtube.com/watch?v=WDMYerTIVKE

Header back exhaust... JUST FINISHED friday about $450 totall O_O

[slick_celica]

can anybody add in the power increase that they got or was indicated on the packages they got?

Doing up my celica at the minute and have option on mongoose exhaust cat back which i was going to go for but i'd rather get the best power outputs than just going for the first thing that i could find?

[Bitter]

http://www.youtube.com/watch?v=WDMYerTIVKE

Header back exhaust... JUST FINISHED friday about $450 totall O_O

sounds alot like mine haha

[ChOoKmAn]

gee that pouring some smoke out into the air i breathe lol

[Bitter]

gee that pouring some smoke out into the air i breathe lol

its moisture.

[Drew-887]

Here are some clips of my celi. I dont have any pics of my exhaust but i'll add them ASAP.

I have a 4-2-1 header, Greddy SP2 exhaust with no cats or resonator.

http://www.youtube.com/watch?v=1NHPpnpIZog
http://www.youtube.com/watch?v=x5TAz80nKE4


This post has been edited by Drew-887: Nov 6, 2006 - 11:59 PM

[snapshotgt]

^ your vids are not working...

[kcizzle]

Just had mine installed:

got it from ebay. here's the link: http://cgi.ebay.com/ebaymotors/Muffler-Sta...bayphotohosting

I paid $45.00 for the muffler and $40.00 at a local muffler shop to have it installed. I was planning for a greddy or a magnaflow but i can't afford it so i tried this one. it has a very deep, not loud, humming, sound and I can feel the decrease of back pressure from stock. I enjoy driving my car now. I'll try to post some videos when I have the time.

This post has been edited by kcizzle: Dec 16, 2006 - 10:28 AM

[Valo666]

New Exhaust system 2.25" Full staindless manderal bent exhaust from headers back with Magnaflow highflow cat *inline*, vibrant performance 2.25 12" highflow resignator to Magnaflow muffler with dual rolled tip.

where'd you get it done? how much?

Zoro Discount Muffler at Dundas and Dixie in missisuaga, well like..1 light west of there past canadian tire. I provided the muffler and it cost me...$600 for stainless. Muffler was like another $115. Good guys, good price and quick too.

[bigal004321]

4-1 headers, 2.5" headers back stainless steel with high flow cat and magnaflow muffler. sounds nice but now i need a whole new exhaust for my 3sgte swap

bigal

[elvasoshexai]

Zoro Discount Muffler at Dundas and Dixie in missisuaga, well like..1 light west of there past canadian tire. I provided the muffler and it cost me...$600 for stainless. Muffler was like another $115. Good guys, good price and quick too.

where'd you find the muffler for so cheap?? cheapest i can find is like $150