Adjusting Window Track?, My window rolls up too high... Options

[Coomer]

Hi,
I recently installed a Spal power window kit in my car, and now whenever I roll up my windows, my driver's side window rolls up just a tiny bit too high, and it makes it so that the door won't close. Does anyone know if there is a way to adjust the window track so that the window won't go up quite so high? I only need it to go down about maybe 1mm and my door will close fine.

[nik]

ya i've adjusted mine you have a bolt and the bottom of the door for the track and two on the glass to slide it back and forth if you have a book ( 94-99 toyota celica books) its also in there

[Coomer]

Thanks for the advice. I simply adjusted the two bolts near the top of the door, and now it works fine. Thanks again!

[Drocay]

coomer so would u recomend the window kit from spal.
for those of us who don't have power windows.
and by the way can u post up a pic of were u placed the switches for the windows.

Thanx.

[Coomer]

I would definitely recommend the power window kit from Spal. I got the deluxe one, which is supposedly quieter than the standard one, and I really like it. The windows go up and down quickly, and they're pretty quiet, even though I haven't tried them with the door panels on yet, because I'm still installing sound deadener in the doors.

Below is a photo of where I mounted the motor in my door.


And here is where I mounted the switches. I painted the panel with Duplicolor Metalcast paint and it came out pretty well, and looks much, much better in person than in this picture. I'm going to redo the whole thing sometime though, because I don't think it looks as good as I was hoping for originally. I'm going to relocate the power mirror switches to the glovebox fairly soon I think as well.


Let me know if you need any more information. Hope this helps.