some pics, my 6gc @ Hooters Bash Options

[6gc_driven]

just got back from hooters bash @ melbourne..i had lots of fun, but most importantly, took home
2nd place Best Toyota !! (my brother's 7gc took 1st ) heres some pics..enjoy!

[jdg371]

Sweet. Great job... haha family taking 1st and 2nd! got any pics of his MKVII?

[6gc_driven]

well, heres the only recent pic i can get you (took it today)..sorry about the bad pic quality, it was taken with my camera phone. i'll try n get you better pic tomorrow..


so what yall think, based on exterior, 6gc > 7gc, 6gc= 7gc, or 6gc<7gc??

This post has been edited by 6gc_driven: Mar 17, 2007 - 11:07 PM

[jdg371]

Stock for Stock : 6GC > 7GC : Not much of being biased... I own both.
With the addition of lips and such. Its hard to say. 6GC = 7GC

Between yours and your brothers....

You > Him..

It depends also.. when we get clearer pics of the 7GC

[6gc_driven]

woot!! i just got an ego boost! ..
but seriously, his car looks real nice. I just gotta get you better pics of it, then i can see what everyone really thinks.

[jdg371]

I have the same type of CF hood as him =] lol

Still looking for a raised hood tho.. flat black scoop + CF Hood lol how ghetto

[zCelicaDude]

whoa thats a nice celica!!

the vents in the front fenders? are they custom or aftermarket fenders

[6gc_driven]

whoa thats a nice celica!!

the vents in the front fenders? are they custom or aftermarket fenders

thanks man. those arent custom fenders though. they are Z3 fenders that are made by VIS for our cars. they look pretty good IMO.

[sugarfree]

I like your kit alot, but at the bottom it gets too rough. If it stayed smooth itd be a nice kit. Very nice kit and paint though.

[6gc_driven]

I like your kit alot, but at the bottom it gets too rough. If it stayed smooth itd be a nice kit. Very nice kit and paint though.

hmmm..too rough?? please explain..(all criticism works, since they point out things i can improve in order to improve the show quality of the car..)

[zCelicaDude]

if you got the clear projector lights that would make your car that bit more sexy :D:D

[DSToyo]

i like the kit...how hard was the install
btw more pics if you can, yours and your brothers

[6gc_driven]

if you got the clear projector lights that would make your car that bit more sexy :D:D

..please believe, they will be on the way!! all four projectors will be purchased soon ..but, because the front end is a pain to put on and take off, im going to put on projectors while im doing my 3s swap, so i dont have to take off the front end just to install projectors.
n like i metioned, it really is a pain to take off the front end and to put it back on. it takes me n my brother about 10-15 minutes to take it off (we have to be very careful with it cause of the molding)..im even considering making a cut somewhere on the bumper and add clips to hold it (cause it would make things a whole lot easier)..kinda like this..


..so what yall think, should i do that?? how do you think it would look? n if so, where should i make that cut?

..n sorry guys, but no recent pics of the 7gc.i'll try n take some this week..

[celi_gt_racer]

my constructive criticism :

1.) lose the very bottom carbon fiber diffuser on the front bumper
2.) downsize the aluminum wing - maybe a TRD in its place?
3.) take off the stickers down the edge of the windshield

.... then i'll b in love - the bodykit is real nice

[6gc_driven]

my constructive criticism :

1.) lose the very bottom carbon fiber diffuser on the front bumper
2.) downsize the aluminum wing - maybe a TRD in its place?
3.) take off the stickers down the edge of the windshield

.... then i'll b in love - the bodykit is real nice

1.) bumpers too high off the ground without it n it goes along with the orange/carbon fiber theme
2.) its not an aluminum wing- its carbon fiber
3.) honestly, i would love to take off the stickers (just not my fav), but its from my car club, so gotta stay true to them (n plus, they got me a shop sponsorship)

..n thnks for the bodykit comment (since i really hadnt had much feedback on it)..but i really want to kno what yall think bout that clip idea on the side of the bumper..i jus have mixed feelings about the idea.

[6strngs]

I love the way the bumper is molded to the fenders. please don't cut it! 10-15 minutes really isn't all that long to remove the front end! it took me a lot longer than that to remove my front bumper and fenders when I put my VIS fenders on! took me a couple hours just to get those bolts holding the fender and bumper together off!

[playr158]

haha awesome congrats!

are those angel eyes i see in there

[6gc_driven]

haha awesome congrats!

are those angel eyes i see in there

angel eyes?!! pssh..heck no dan! i dont know what your talkin about, there definitely isnt any angel eyes in there..

[celi_gt_racer]

u mean to tell me that your entire spoiler is made of carbon fiber?
i believe the carbon fiber piece that makes up the body of the spoiler is supported and attached to your hatch by something metal - most likely aluminum ... thus - aluminum wing ... thats all i meant
maybe you could cut it's height down a bit - i dont think you need all that massive downforce in the rear

[6gc_driven]

hmm..point well taken.
well i have been considering lowering it quite a bit, bu dont know how to yet.
ive actually been lookin for some type of drag wing, but havent been able to find one made of carbon fiber that would fit the car..
ive been looking for something like this.


oh, n btw, all that downforce is needed when you have a whopping 100hp tossing you around!! LOL

[DSToyo]

i love that kit!!!
x2 on the new spoiler tho

[6gc_driven]

i love that kit!!!
x2 on the new spoiler tho

yeah..too bad i cant find one in carbon fiber ideas anyone?

[6strngs]

i love that kit!!!
x2 on the new spoiler tho

yeah..too bad i cant find one in carbon fiber ideas anyone?

get a fiberglass one and then have it wrapped in carbon fiber

[6gc_driven]

i love that kit!!!
x2 on the new spoiler tho

yeah..too bad i cant find one in carbon fiber ideas anyone?

get a fiberglass one and then have it wrapped in carbon fiber

good idea, but first..i dont even think they make one that style for our cars, or do they??
n two, where can i get it wrapped in CF??

[6strngs]

i love that kit!!!
x2 on the new spoiler tho

yeah..too bad i cant find one in carbon fiber ideas anyone?

get a fiberglass one and then have it wrapped in carbon fiber

good idea, but first..i dont even think they make one that style for our cars, or do they??
n two, where can i get it wrapped in CF??

I dunno, I figured when you said you couldn't find any in carbon fiber that that meant that you could only find them in fiberglass...

as for wrapping, there might be people on this board willing to do it for you.

[6gc_driven]

hey guys..i finally got a pic of my brothers 7gc. it was at todays show..we didnt place cause both me n him were exhibition cars for our shop sponsor, so we didnt compete. well anyway, heres the pic..n sorry bout the bad pic quality, it was taken with my phone.

[super13jew]

i like your car better. no offense to your vrother but we got two guys down here in bradenton with 7gens that look way better. one has a real Veilside kit, veilside rims, and veilside exhaust. i think your brothers car is clean though.

[cel97ica]

i like your better then your brothers...i just like the styling of any 6th gen compared to a 7 but sick car