Lotek GB, Finally going down Options

[phat94celi]

Ok, I need everyone who is in on this to check and reply to this thread HERE.

If you dont have a celica.net login, just leave your name and email address in this thread.


Thanks
-Kaleb

[Jussimple]

jussimple@charter.net (AkA Jimmy)

This post has been edited by Jussimple: Jul 22, 2003 - 7:23 PM

[RedSunCelica]

Sweet I already got the cash set aside for 2, thanks

This post has been edited by RedSunCelica: Jul 23, 2003 - 12:32 AM

[bojangles_8686]

I already put my name on that forum that you linked to.. but I will put my name here too just in case....

chucky lynch email: bojangles_8686@hotmail.com

[capncrakhed]

Scott Levine

Scooot82@mail.com

[JKceli]

Jordan Kellerman

jordan2757@hotmail.com

[phat94celi]

ttt. Come on people, I need everyone who was on the other list to post either here or at celica.net so I can be sure I have the 30 people I need. I plan to send in my pillar on Monday.

-Kaleb

[Neipas09]

I would recommend emails and PMs to all the people.
I didn't know that you needed my email until you sent me that email. So just a thought

[snadman]

Brandon (snadman@msn.com)

[phat94celi]

I emailed everybody from this website already. I still need to PM some people at celica.net.

-Kaleb

[phat94celi]

bump

[phat94celi]

ttt

[FallenHero]

So how many more people do you guys need? Also, is there a price yet?

Jon

[Jussimple]

Whats the tally on whos still down, I don't see that many replies in the thread. If it gets close again I'll buy two sets instead of just one.

J

[FallenHero]

I might be back down,will somebody tell me what's going on with this?

[phat94celi]

No, I dont have a set price yet. It will be between $40-60.

We have to have 30 people to get the project started. I was going to send my pillar in today, but my car is still in the shop, so I wont be sending it in until next monday.

I'm also still waiting for guagepods.com to email me back with some answers to some more questions I sent them. Please, everyone who is getting this, leave your name and email in this thread. I will update as soon as I get some more info.

Thanks,
Kaleb

[1bwilson]

Im still for 1 maybe 2 if needed.

1bwilson (Bryan) bwilson21784@yahoo.com

[XE_Nathaniel]

how much was it again?

-Nate

[XE_Nathaniel]

So wait.....I give money.......then you send to me? I forgot how this works.

-Nate

[FallenHero]

If I get into this,could I just mail you a Money order and be set? about how long will they take to finish?

[Jussimple]

I really want this buy to go down so I'm going to post in it for a bit. Don't hate me coomer, I just reeeeaaaally want this thing. I'm sure that there are alot of people like this. Phat94celi I'm in till the end so don't worry about me backing out at all. My engine won't be in till december so I'm patient. It won't be installed untill all the turbo parts are on the engine itself. So like I said I need this thing bad.

Later
J

[bojangles_8686]

So now that we are getting gauge pillars, what kind of gauges is everybody gonna put in em?

[ToYCeLi8]

Looks like if this can go down pretty quickly I'm in. Im going to need that by the end of the month. Oh well all i can do is wait.

[FallenHero]

Hell, I might take one, but I'm getting no feedback!

Jon

[Chrobis]

i'm in too if its not to late...

[phat94celi]

Sorry I havent replied in a while. I sent in my pillar on Monday. As soon as I get a price from them, I'll post on here and also email everyone to let them know. That is also when I will need everyones payment. I'm not sure yet if the money will all come to me or if you all can send it to Lotek. I'll find that out soon.

Thanks to everyone involved in this!

-Kaleb

[bojangles_8686]

Ahhhhhyes I cant wait to get this thing

[FallenHero]

can other people still get in on this?

Jon

[Jussimple]

I'm sure the more the marrier. We haven't even gotten a quote yet so untill then no one is putting in their money. The buy hasn't really started, just the group part.

J

[phat94celi]

Yep. More people can still get in. I just have to have a least 30 for them to make them, which I should already have. But, the more, the merrier!

[phat94celi]

Chrobis--need a name and email address.

FallenHero--You in? If you have any more questions, email me at big_kaleb69@hotmail.com.

-Kaleb

[CDNSLEEKA]

You can count me in!Sorry for the delay with my reply.
Andrew andrew871@msn.com

[nik]

NIK MITCHELL



NIK_MITCHELL@HOTMAIL.COM

where do we send the money?

[Charlie97L]

[TunerHawk]

Hey, wait, Im in, sign me up. Just tell me how much, where to and when.

Brandon
wildcat913@hotmail.com

[zipstrips]

it should be worth the wait, i will be adding to my boost gauge an oil pressure and EGT gauge.

[phat94celi]

Right now I'm waiting for contact from Lotek. If I haven't heard anything by Friday, I'm going to call them.

[FallenHero]

Ah, wtf! I'm in as long as i don't have to send you any more than $60! I'll need one of these soon enough, so why not take advantage and get a good one. Do you have a list of people getting them?

Jon

[ghostdog]

[phat94celi]

How do you mean list? I think there is a list of the people on the first page of this thread. I also have a list printed out that I am writing everyones email on and checking their name off of when I've got confirmation that they are in.

I will Email everyone when I get the price.

-Kaleb

[phat94celi]

OK, Heres an update: I called Lotek and their business office is closed until Monday, August 18. It has been closed since the 8th which is probably why I havent received the pricing. Hopefully early next week I will hear something. Thanks for being patient everyone!

Thanks
-Kaleb

[CDNSLEEKA]

Can we see a updated list of who has been added too the list !I just want to make sure I`m included in on this group buy.

[Coomer]

Is it too late to get in on this? I'm wanting to get a pod that can hold my air/fuel ratio, oil pressure, and water temp gauges once my new engine is in.

[phat94celi]

Nope, its not too late. I'm still waiting to here from Lotek. I would have called them but I dont have time during the week. School and work takes it all.


I'll find out price and everything as soon as possible.

-Kaleb

[nik]

add me if you can

NIK

[FallenHero]

I'm about to start buying my gauges because I don't know how much longer I will get the prices I'm getting... They are 2 and 1/16th on all three holes right?

Jon

[phat94celi]

Yeah, all three holes are 2 1/16".

[phat94celi]

I finally got the pricing! It will be 44.99 in black. They say they can paint it for an additional 7.99(you could probably paint it yourself for cheaper). Shipping is 5.99 US, 10.99 Internation/Canada.

I'll let everyone know when I need payment.

Thanks,

-Kaleb

[Chrobis]

WOOT! Great job man, priced lower then most of us expected I think.

almost ready in time for my swap!

This post has been edited by Chrobis: Aug 21, 2003 - 1:29 AM

[FallenHero]

So what's the ETA?

Jon

[Jussimple]

Love the pricing on this one. Let me know when you need the cash. I know your going to use paypal right? Let us know how the money is transfering and to who its going to. Later

J

[nik]

just let me know where to send it

This post has been edited by nik: Aug 22, 2003 - 2:33 PM

[phat94celi]

I'll let everyone know where to send payment as soon as I find out! Hopefully you can send it to them as that would make it much easier on me!

-Kaleb

[jayi12-15psi]

I'll take one can you just pm me here with further info, I dont really have an e-mail account.

-Jim

[phat94celi]

UPDATE: I should be receiving the rough mock up next week sometime. Also, this is going to be a full a-pillar replacement, but they cannot reproduce the part that goes from the top of the a-pillar back. Hopefully you are all still in. I will take pics of the rough mock up when I get it to let everyone know what I'm talking about.

Once I ok the mock up and send it back, we will all need to pay. I will be emailing everyone about this also.

Thanks,

-Kaleb

[phat94celi]

Hey guys. By any chance, is there anyone in on this group buy that is near me. I'm in the Belleville, Collinsville Illinois area or Indianapolis area. I need someone that can help with the group buy for the test fit of the pillar. I havent gotten it yet, but when I do, I'll need a car to test fit it on. I dont have mine anymore because someone torched it night before last.

Thanks

-Kaleb

[phat94celi]

Yep.

Sorry I haven't posted in this in a while. This is still going down. I'll find some way to test fit the pillar once I get it. But that wont be until next weekend. I have to stay in Indy this weekend. I'm not even sure if the mock up is at my Aunts house yet.

I'll post as soon as I find out anything new. I'm also going to try to take some pics of the mock up so everyone know what it looks like.


later
-Kaleb

[bojangles_8686]

Really sorry to hear about your car dude. Did you find out who did it?

[Guest_Matthew_*]

i am on the west side (yay yay what what representin west side in the hizouse) of iowa.

if you ship it to me then i can ship it back and pay you the cost that you paid to ship back when i ship it back. and test fit it then.



EDIT: that was my 1800th post. well worth it.

This post has been edited by GT2GT4: Sep 11, 2003 - 10:33 PM

[bojangles_8686]

Whoa congrats on the 1800, thats a helluva lot of posts lol.

[Supersprynt]

yeah SOMEONE doesnt have a life...

You kno im just playin, i gotta lot too.

[Guest_Matthew_*]

i have 1000 more than you

plus i gotta couple more months on you too.

[FallenHero]

Lol, I'm right there with you, I'm just glad I don't have the most... post whore j\k

Jon

[Guest_Matthew_*]

ya man


i always look at your posts to make sure i have more


hehe

[capncrakhed]

so whats the deal with this group buy now??

now your celi got torched.....is this thing still going down or what?

[phat94celi]

Yeah, its still going down. I'm not sure if I have received the mock up yet. It is going to my aunt's house in Illinois. I'm in Indiana through the week. So I cant check on it until this weekend. I'll update this weekend.

[RedSunCelica]

Just giving this thread a bump

Im so happy i cant wait ill have the guage pod and if everything goes well a GT4 carbon fiber hood

[NYCelica]

So whats up???

[Supersprynt]

Yeah i am real interested but whats this i am reading about them not being able to produce the top part? The wholoe thing is one piece does this mean we gotta cut and paste?

[phat94celi]

Im not sure yet. I haven't yet seen the mock-up. I'll let everyone know when I find out.

[bojangles_8686]

I have a question.....

I am getting this gauge pillar, but I still havent decided on what gauges I want. I dont have a turbo, and I want the gauges to match my indiglo gauges, so they should have a white face and they should glow. Does anybody have any suggestions/websites?

[FallenHero]

www.madtachs.com

=autometer

Jon

[Striking4]

Denzel
Striking4@hotmail.com

[capncrakhed]

welp

what'd u find out phat94celi.....was the gauge pod there???

[phat94celi]

No. The gauge pod wasn't there when I went home this weekend. I emailed them, but I haven't had a chance to check it yet. I will possibly be able to check it tonight.

[5sfeTurbo]

Id like to get down but it dosent sound like its available, keep this thread updated and as soon as its a sure fit and only if theres no cuttin and pasting Ill hook it up.

[NYCelica]

Well???? whats up? Hellllooooo any new great news about it?

[Jussimple]

I really hope this didn't fall through, I really want this thing. How about an update :-)

[bojangles_8686]

[phat94celi]

I'm sorry I don't reply alot guys. I don't have a lot of time because of work and school. And the fact that I can only get on the computer sometimes at school. I haven't had a chance to check my email again, but the last time I checked it, there was not a reply from Lotek. As far as I know, this is still going down, just need to hear from them on whats going on.

I'll let everyone know when I find something out.


-Kaleb

[Chrobis]

cough

[Neipas09]

Sounds like someone needs to get their priorities straight and call Lotek!!!

[Chrobis]

I am guessing this has kinda died or something...

[snadman]

I can grab up 50 bucks anytime...so just tell me if it's ever going down.

[Chrobis]

bump?

[hunter_D]

i want in too!!
email me back on price and where and who to send the money..

[hunter_D]

thai hoang
whobeurmasta@yahoo.com
black A piller please

[Calipso]

Man, I am intrested if its not to late.... Do you sill need our info from celica.net???

[Coomer]

I just called Lotek and left a message. They're supposed to get back to me in 24 hours, so we'll see.

[Supersprynt]

Yeah im in with this if its gonna go down.

[Chrobis]

so coomer is in charge now? he is taking over? what happened to "phat"?

[Coomer]

I woke up at 8:00 AM this morning to my cell phone ringing, and it was Lotek. They said that the guy who initiated this now has the mock-up pillar to test fitment and stuff, and they're waiting to get it back from him, and then they can start production. So if anyone can get a hold of him, then we can this going hopefully.

[hunter_D]

i have one question? does the whole order go to the guy who initiated this and he sends it out to us or we order from the dealer? just wondering......cause thats a lot of work to do.

[Coomer]

[Supersprynt]

Well whoever is in charge of this: just let me kno when and where to send the money.

[phat94celi]

Hey guys. I haven't been by my Aunts house yet. I'm gonna go later tonight, I'll let you all know if it's there and whats going on.


-Kaleb

[RedSunCelica]

WOOHOO cant wait for the guage pod

[NEVERSTOP]

count me in if this actually goes threw.

[phat94celi]

Hey guys. Went to my Aunt's house. It was there. Now I just need a Celica to test fit it in. Anyone around St. Louis or Indianapolis that can let me use their car?

I wish I still had my celi .


Let me know if you can help.


-Kaleb

[Supersprynt]

Well im sure anybody would test fit it for you, i am in NY so its far but i'll do it if nobody else will.