 FS 94 gt parting out UPDATE!!!!, entire car |
  |
 Jan 31, 2008 - 10:23 AM
|
 
|
|
Enthusiast  Joined Nov 14, '06 From michigan Currently Offline Reputation: 10 (100%)  |
I have a 94 gt am parting out. Have most everything. color red.
Ok here is the scoop. The car has a bad rod knock. lower end of the motor is going. The interior is in good shape except the drivers seat has the tear that most of them do. passenger seat is good rear seats are good. all the interior trim pieces are in good shape, not perfect. the shifter boot is shot as is usual. the exterior is red. drivers fender is dented badly,coud be repaired i you are an expert. passenger fender has some hail dents but nothing major. hatch is in good shape. wing is chipping but no cracks. no center post. don't have the interior hatch cover. rear disk assembly for conversion is available. Pm me with any requests. I will make parts available to first person that asks, and then by best offer but first asker gets final option on price LATEST UPDATE! WEATHER IS GETTING BETTER, AM RESUMING PART OUT I have the following parts already off the car and ready for sale. Front bumper (no emblem) $125 plus shipping Front bumper support bar (this is the 5mph aluminum crash bar) $40 plus shipping Front Low beams (no cracks no broken tabs) passenger side sold. Drivers side $50 plus shipping Radiator $75 plus shipping Radiator fans $50 each plus shipping Both Doors (just the doors, no glass no electrical) no shipping outside the US (sorry but it's just too much hassle) Door windows Door panels (black 1 speaker in door) Window motors Switch panels for doors with switches (will not separate) Dash plastic trim pieces Rear seats (very good condition) Tweeters and covers SOLD Please PM for prices or availablity of other parts not listed. I will try to the best of my ability to give priority by order I receive pm. This post has been edited by cochise: Mar 25, 2008 - 9:02 AM |
|
Jan 31, 2008 - 11:04 AM
|
|
 Enthusiast Joined Dec 9, '05 From Bedford, TX Currently Offline Reputation: 11 (100%) |
What's wrong with the car? accident?
--------------------  <--- I miss :'' ( |
|
Jan 31, 2008 - 11:16 AM
|
|
|
Enthusiast Joined May 23, '06 Currently Offline Reputation: 0 (0%) |
Cost for rear disc conversion?
|
|
Jan 31, 2008 - 11:21 AM
|
|
 Enthusiast Joined Apr 22, '07 From Bay Area, California Currently Offline Reputation: 14 (100%) |
dibs on gauge cluster. can u send me a pm with pix, price and other info? such as if there is anything wrong with it.
-------------------- You say you don't understand how we go dumb, but have you ever been where i'm from?
-=-] Livin it in tha bay's a lil different [-=- |
|
Jan 31, 2008 - 11:24 AM
|
|
|
Enthusiast Joined Nov 28, '06 From Atlanta, ga Currently Offline Reputation: 0 (0%) |
color interior????dibs on door panels and arm rest
This post has been edited by phosai26: Jan 31, 2008 - 11:24 AM --------------------  (Oo oO) my angels |
|
Jan 31, 2008 - 11:58 AM
|
|
 Enthusiast Joined Apr 15, '07 From san antonio tx. Currently Offline Reputation: 12 (100%) |
Interested in rear disc assembly as well...
pm me and let me know what your asking im in san antonio P.M'D This post has been edited by zero07: Jan 31, 2008 - 12:44 PM -------------------- Sorry, no animated sigs allowed.
|
|
Jan 31, 2008 - 12:07 PM
|
|
 Enthusiast Joined Dec 19, '07 From tx Currently Offline Reputation: 22 (100%) |
Oh $hit - I'm in Houston and I need a bunch of small parts noone else is gonna ask you for.
Where is the car located? --------------------  ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI] PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYO SUSP: Tein/Bilstein/SusTech/ INT: SS-III SEATS/Toyota Hyper Sports EXT: WRC/TRD/404 QUOTE (lagos @ Aug 25, 2010 - 10:13 AM)  Its a safety feature so that people like you don't end up killing themselves or everyone around them. Slow down Paul Walker. 6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url] |
|
Jan 31, 2008 - 12:09 PM
|
|
|
Enthusiast Joined Mar 17, '04 From Lansing, MI Currently Offline Reputation: 0 (0%) |
PM'd about driver side low beam.
This post has been edited by mike96ST: Feb 1, 2008 - 8:51 AM |
|
Jan 31, 2008 - 12:19 PM
|
|
|
Enthusiast Joined Nov 28, '06 From Atlanta, ga Currently Offline Reputation: 0 (0%) |
PM on Driver side high
-------------------- (Oo oO) my angels |
|
Jan 31, 2008 - 12:32 PM
|
|
 Enthusiast Joined Mar 29, '07 From Philly Currently Offline Reputation: 11 (100%) |
dibs on leather interior if you have it...and rear disc conversion if the others fall through
--------------------  I"M NOT A TOYOTA FAN, IM A FANATIC 1984 accord hatch 5 speed (T-Belt)-Junkyard 1991 VDUB jetta wolfsburg Ed. 5 speed (clutch)-junkyard 1988 Dodge Aries K (sold) 1969 Chevy El camino - Traded for celica 1991 Dodge Daytona-Traded for Celica 1988 Chevy Camaro-Work in Progress 1989 Ford Mustang LX 5.0 - For Sale 1995 Toyota Celica-Work in Progress |
|
Jan 31, 2008 - 1:14 PM
|
|
 Enthusiast Joined Oct 10, '06 From Greensburg,PA Currently Offline Reputation: 27 (94%) |
dibs on interior trim - around radio
also A/C controller below radio -------------------- Breaking Axles...
|
|
Jan 31, 2008 - 1:39 PM
|
|
 Enthusiast Joined Feb 7, '07 From Portland, Oregon Currently Offline Reputation: 67 (96%) |
I guess I'll get in line for that rear disc conversion setup... but what I REALLY REALLY want (it's SO stupid) is that damn lightup key ring. Got one?
--------------------  |
|
Jan 31, 2008 - 1:50 PM
|
|
|
Enthusiast Joined Jan 6, '06 From Oahu, Hawaii Currently Offline Reputation: 0 (0%) |
driver rear quarter window.
|
|
Jan 31, 2008 - 4:01 PM
|
|
|
Enthusiast Joined Nov 14, '06 From michigan Currently Offline Reputation: 10 (100%) |
[quote name='My2Celi' date='Jan 31, 2008 - 4:04 PM' post='636446']
What's wrong with the car? accident? It has a bad rod knock. |
|
Jan 31, 2008 - 4:28 PM
|
|
 Enthusiast Joined Nov 21, '07 From I-59 -N- 610 Houston, Tx Currently Offline Reputation: 0 (0%) |
your passenger a-frame assembly would be very nice.... mine got ripped clean off
This post has been edited by monkey: Jan 31, 2008 - 4:29 PM |
|
Jan 31, 2008 - 5:07 PM
|
|
 Enthusiast Joined Jan 30, '06 Currently Offline Reputation: 1 (100%) |
How much for the front drivers side splash shield?thanks
--------------------  |
|
Jan 31, 2008 - 5:19 PM
|
|
|
Enthusiast Joined Nov 14, '06 From michigan Currently Offline Reputation: 10 (100%) |
QUOTE(lazarpaul @ Jan 31, 2008 - 10:07 PM) [snapback]636563[/snapback] How much for the front drivers side splash shield?thanks do you mean the wheel liner ? |
|
Jan 31, 2008 - 5:22 PM
|
|
|
Enthusiast Joined Nov 14, '06 From michigan Currently Offline Reputation: 10 (100%) |
QUOTE(pittfirefighter @ Jan 31, 2008 - 6:14 PM) [snapback]636473[/snapback] dibs on interior trim - around radio also A/C controller below radio You just want the trim that goes around the radio? The ac controller trim or the whole ac controller asembly? |
|
Jan 31, 2008 - 5:38 PM
|
|
|
Enthusiast Joined Jun 14, '07 From Bremerton, WA Currently Offline Reputation: 1 (100%) |
I'll take the driver's side mirror control switch if you have it in good shape.
$10 shipped? |
|
Jan 31, 2008 - 6:25 PM
|
|
 Enthusiast Joined Nov 4, '03 From Colorful Colorado Currently Offline Reputation: 13 (100%) |
How much for the trans and all the trans mounts?
-------------------- 1996 Toyota Celica Convertible GT (My 1st Celi,Owned since 2002)
1995 Toyota Celica Coupe GT 3S-GTE 1994 Toyota Celica Liftback GT-Four (RHD/GT-Four conversion) 1990 Toyota Xcab 1UZ-FE Lexus V8, Solid Axle Swap on 35s geared and locked dual Tcases (Rock Crawler) 1990 Toyota 4Runner 5VZ-FE V6 swap, Solid Axle Swap on 38s (Rock Crawler) 1972 Ford F-350 Crew Cab 4X4 Cummins Turbo Diesel (Tow Rig) 1956 Ford F-100 429 / Automatic 1969 Ford Mustang Fastback 429 Tubbed and Caged (Drag Car) 1967 Ford Mustang Fastback 427W / Automatic 1965 Ford Mustang Fastback 347 / 5-speed |
|
Jan 31, 2008 - 6:35 PM
|
|
|
Enthusiast Joined Nov 14, '06 From michigan Currently Offline Reputation: 10 (100%) |
QUOTE(Cory @ Jan 31, 2008 - 10:38 PM) [snapback]636592[/snapback] I'll take the driver's side mirror control switch if you have it in good shape. $10 shipped? I'll get back to ya I have a deal in progress the whole door panel setup for a power conversion. If he backs out i'll let you know. |
|
Jan 31, 2008 - 8:51 PM
|
|
|
Enthusiast Joined Jan 30, '06 Currently Offline Reputation: 1 (100%) |
QUOTE(cochise @ Jan 31, 2008 - 5:19 PM) [snapback]636579[/snapback] QUOTE(lazarpaul @ Jan 31, 2008 - 10:07 PM) [snapback]636563[/snapback] How much for the front drivers side splash shield?thanks do you mean the wheel liner ? Yeah.....i guess......the plastic thing that goes around the wheel inside the fender -------------------- |
|
Jan 31, 2008 - 10:19 PM
|
|
|
Enthusiast Joined Nov 14, '06 From michigan Currently Offline Reputation: 10 (100%) |
QUOTE(lazarpaul @ Feb 1, 2008 - 1:51 AM) [snapback]636678[/snapback] QUOTE(cochise @ Jan 31, 2008 - 5:19 PM) [snapback]636579[/snapback] QUOTE(lazarpaul @ Jan 31, 2008 - 10:07 PM) [snapback]636563[/snapback] How much for the front drivers side splash shield?thanks do you mean the wheel liner ? Yeah.....i guess......the plastic thing that goes around the wheel inside the fender unfortunately it is shredded. atire guy said "oh ya these tires will fit no problem". he was wrong I ended up getting 2 tires free though |
|
Jan 31, 2008 - 10:26 PM
|
|
|
Enthusiast Joined Apr 15, '07 From san antonio tx. Currently Offline Reputation: 12 (100%) |
P.M'D
-------------------- Sorry, no animated sigs allowed.
|
|
Jan 31, 2008 - 11:11 PM
|
|
|
Enthusiast Joined Jul 2, '06 From Shrewsbury, ma Currently Offline Reputation: 5 (100%) |
pm'd
|
|
Jan 31, 2008 - 11:15 PM
|
|
|
Enthusiast Joined Nov 21, '07 From I-59 -N- 610 Houston, Tx Currently Offline Reputation: 0 (0%) |
a-frame assembly... i know it takes cutting to get off but i need it and u got it.... how much?
|
|
Jan 31, 2008 - 11:49 PM
|
|
|
Enthusiast Joined Nov 14, '06 From michigan Currently Offline Reputation: 10 (100%) |
QUOTE(monkey @ Feb 1, 2008 - 4:15 AM) [snapback]636724[/snapback] a-frame assembly... i know it takes cutting to get off but i need it and u got it.... how much? man thats gonna be a bulky part to ship from mich to texas, i'll say 25 bucks and you pay the shipping cause I know its gonna be high. that'll make it worth my time to take it off and ship it. |
|
Feb 1, 2008 - 12:10 AM
|
|
|
Enthusiast Joined Jun 21, '07 From SoCal Currently Offline Reputation: 0 (0%) |
drivers side mirror switch for 10+ shipping
|
|
Feb 1, 2008 - 2:00 AM
|
|
|
Enthusiast Joined Sep 12, '05 From Who says you can't circle race a celica? Currently Offline Reputation: 5 (100%) |
Passenger side head light support (bolt on part below the head lights) , passenger side front fender support (bolts to the frame rail in the front of the fender) also interested in the front of the passenger wheel tub steel and the radiator supports also passenger airbag and cover
This post has been edited by Agent21: Feb 1, 2008 - 2:02 AM -------------------- 94 GT Liftback
86 GTS Coupe (Racecar) #99 Crew Chief |
|
Feb 1, 2008 - 3:59 AM
|
|
 Enthusiast Joined Aug 3, '07 From Bellevue, Nebraska Currently Offline Reputation: 28 (100%) |
on your profile you have "injen" under mods. i'm guessing that's an intake? Cold air or Short ram? (dibs) and does anyone know if a 5s intake will fit on a 3gen 3sge?
This post has been edited by stetsonaw: Feb 1, 2008 - 3:59 AM -------------------- ~Andy
 Check out my Droid Goodies | My Flickr |
|
Feb 1, 2008 - 7:51 AM
|
|
|
Enthusiast Joined Aug 31, '05 From Houston TX Currently Offline Reputation: 7 (100%) |
do you have the shifter cables, driver axles, rear mount? I really need them !!!!!!
-------------------- |
|
Feb 1, 2008 - 9:56 AM
|
|
|
Enthusiast Joined Dec 19, '07 From tx Currently Offline Reputation: 22 (100%) |
QUOTE(stetsonaw @ Feb 1, 2008 - 3:59 AM) [snapback]636792[/snapback] on your profile you have "injen" under mods. i'm guessing that's an intake? Cold air or Short ram? (dibs) and does anyone know if a 5s intake will fit on a 3gen 3sge? Yeah it should - if not - minor alteration would make it work. -------------------- ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI] PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYO SUSP: Tein/Bilstein/SusTech/ INT: SS-III SEATS/Toyota Hyper Sports EXT: WRC/TRD/404 QUOTE (lagos @ Aug 25, 2010 - 10:13 AM) Its a safety feature so that people like you don't end up killing themselves or everyone around them. Slow down Paul Walker. 6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url] |
|
Feb 1, 2008 - 12:33 PM
|
|
|
Enthusiast Joined Jan 29, '08 Currently Offline Reputation: 0 (0%) |
what kind of shape is the driver side door in?
|
|
Feb 1, 2008 - 12:49 PM
|
|
|
Enthusiast Joined Oct 18, '06 From cincinnati Currently Offline Reputation: 10 (100%) |
looking for the rear discs (3rd in line..) the passenger wheel well plastic, and the pieces behind the front crash bar as well as the mounting brackets that hold the bottom of the headlights in place. please let me know if u have any of those. shipped to 45248. thank you.
-------------------- proud =3sgte SWAPPED= '95 Celica ST owner [calling it the GT2 or half-trac]
309,000 miles n' .... |
|
Feb 1, 2008 - 1:37 PM
|
|
|
Enthusiast Joined Nov 14, '06 From michigan Currently Offline Reputation: 10 (100%) |
QUOTE(Agent21 @ Feb 1, 2008 - 7:00 AM) [snapback]636781[/snapback] Passenger side head light support (bolt on part below the head lights) , passenger side front fender support (bolts to the frame rail in the front of the fender) also interested in the front of the passenger wheel tub steel and the radiator supports also passenger airbag and cover yes i have al those parts.the airbag cover is faded. where do you live so i can figure the shipping cost |
|
Feb 1, 2008 - 1:53 PM
|
|
|
Enthusiast Joined Nov 14, '06 From michigan Currently Offline Reputation: 10 (100%) |
TO ALL WHO HAVE ASKED FOR PICS. I will be taking pictures as soon as this @#$%^&* snow storm stops!
I will have interior and exterior pics. I will post them to photobucket and then post the link. Thanks. Rodd |
|
Feb 1, 2008 - 2:13 PM
|
|
 Enthusiast Joined Jul 11, '06 From Sefner, FL Currently Offline Reputation: 24 (100%) |
jeez vultures you guys work quick, and have already asked for all the parts i need dammit lol
--------------------  |
|
Feb 1, 2008 - 3:15 PM
|
|
|
Enthusiast Joined Aug 19, '07 From Farmington, MI Currently Offline Reputation: 7 (100%) |
e fans on radiator shipped to 48335?
|
|
Feb 1, 2008 - 3:50 PM
|
|
 Enthusiast Joined Feb 18, '06 From NB, Canada Currently Offline Reputation: 12 (100%) |
you got PM !
--------------------  -Rémy 02 SiR, 08 250R |
|
Feb 1, 2008 - 7:20 PM
|
|
|
Enthusiast Joined Aug 3, '07 From Bellevue, Nebraska Currently Offline Reputation: 28 (100%) |
Injen is up for grabs, it's a Chrome SRI. me's lookin for a CAI.
-------------------- ~Andy
Check out my Droid Goodies | My Flickr |
|
Feb 2, 2008 - 8:15 AM
|
|
|
Enthusiast Joined Jan 29, '08 Currently Offline Reputation: 0 (0%) |
Rear struts and strut mounts?
How many miles on the car? This post has been edited by garkahn90: Feb 2, 2008 - 8:15 AM |
|
Feb 2, 2008 - 1:06 PM
|
|
 Enthusiast Joined Nov 21, '05 From Tacoma, WA Currently Offline Reputation: 7 (100%) |
I need one alloy wheel.
Let me know if you can't sell them as a set. |
|
Feb 2, 2008 - 7:05 PM
|
|
|
Enthusiast Joined Nov 14, '06 From michigan Currently Offline Reputation: 10 (100%) |
QUOTE(CaliJeff @ Jan 31, 2008 - 4:21 PM) [snapback]636451[/snapback] dibs on gauge cluster. can u send me a pm with pix, price and other info? such as if there is anything wrong with it. You mean the cluster with the speedo and stuff in the center of drivers seat? |
|
Feb 5, 2008 - 8:55 PM
|
|
 Enthusiast Joined Feb 5, '08 From ct :( Currently Offline Reputation: 0 (0%) |
pm me. i am interesting in the motor regardless of the knock. thanks
|
|
Feb 9, 2008 - 6:32 PM
|
|
 Enthusiast Joined Jul 25, '07 From San Francisco Currently Offline Reputation: 3 (100%) |
PM'ed about thw front windshield. Also need the hinges too.
--------------------   2002 SC430 (WC) - 19" SSR Comp-H, Daizen swaybars, Sparco Demons, JDM Soarer conversion, carbon fiber spoiler, Injen intake, front strut bar, drilled/slotted Brembo rotors 1997 Celica ST (DD) - 17" ADR, ViS Zyclone CF hood, ViS CF hatch, K&N intake, Invader body kit |
|
Feb 9, 2008 - 6:59 PM
|
|
|
Enthusiast Joined Apr 15, '07 From san antonio tx. Currently Offline Reputation: 12 (100%) |
P.M'D
-------------------- Sorry, no animated sigs allowed.
|
|
Feb 11, 2008 - 9:45 AM
|
|
 Enthusiast Joined Dec 16, '02 From New York Currently Offline Reputation: 4 (100%) |
Do you have the key ring?
looks like this  -------------------- Buy my Celica $2,500 - http://www.6gc.net/forums/index.php?showtopic=76562&st=0
|
|
Feb 13, 2008 - 3:32 PM
|
|
|
Enthusiast Joined Feb 13, '08 Currently Offline Reputation: 0 (0%) |
Hey, i am in need of the light support on the right hand side. mine is all bent up from a slide in my '97, and i cant fix it.
|
|
Feb 14, 2008 - 8:09 PM
|
|
|
Enthusiast Joined Nov 14, '06 From michigan Currently Offline Reputation: 10 (100%) |
THIS IS AN UPDATE ; THURSDAY FEB 14TH
DUE TO HEALTH REASONS I AM SUSPENDING THE PART OUT UNTIL SPRING!!!!!!!!!!!!! I HAVE NO GARAGE AND I AM NOT CRAWLING IN THE SNOW ANYMORE!!!! I HAVE CONTACTED ALL BUYERS INFORMING THEM OF STATUS. |
|
Feb 15, 2008 - 2:35 AM
|
|
|
Enthusiast Joined Jan 6, '06 From Oahu, Hawaii Currently Offline Reputation: 0 (0%) |
Okay take care of that health buddy.
Wyatt |
|
Mar 8, 2008 - 10:58 AM
|
|
 Enthusiast Joined Feb 20, '08 From Abingdon, Maryland Currently Offline Reputation: 7 (100%) |
airbags recieved right on time
|
|
Mar 11, 2008 - 6:08 PM
|
|
|
Enthusiast Joined Feb 7, '07 From Portland, Oregon Currently Offline Reputation: 67 (96%) |
I'm a happy camper too with my shiny new Injen... thanks!
-------------------- |
|
Mar 12, 2008 - 10:08 AM
|
|
 Enthusiast Joined Jun 13, '07 From Whitby, ON, CAN Currently Offline Reputation: 6 (100%) |
is it red 3L2 if so... how is the shape of both doors i only need the door skins basically. j/w if there was alot of rust or anything like that
|
|
Mar 15, 2008 - 9:39 PM
|
|
 Enthusiast Joined Oct 16, '02 From Hohenwald, Tennessee Currently Offline Reputation: 1 (100%) |
PM'd
|
|
Mar 16, 2008 - 12:55 AM
|
|
|
Enthusiast Joined Oct 1, '07 From Georgia Currently Offline Reputation: 5 (100%) |
hey man, i f your muffler is in good condition ill take it, how much shiped to 30078
|
|
Mar 16, 2008 - 2:58 AM
|
|
 Enthusiast Joined Oct 11, '06 From calgary Currently Offline Reputation: 5 (100%) |
I want to do a manual conversion so i'd be interested in everything involved, shifter cables, shifter, pedals and everything else.
Also need your motor mounts. Let me know. |
|
Mar 16, 2008 - 12:05 PM
|
|
 Enthusiast Joined Feb 5, '08 From Pittsburgh,PA( New Kensington) Currently Offline Reputation: 0 (0%) |
i need the throttle cable and all of the throttle cable brackets from the pedal to the throttle body. how much shipped to 15068?
-------------------- I Drive One of a Kind's
|
|
Mar 20, 2008 - 2:20 PM
|
|
|
Enthusiast Joined Nov 14, '06 From michigan Currently Offline Reputation: 10 (100%) |
QUOTE(cochise @ Jan 31, 2008 - 3:23 PM) [snapback]636436[/snapback] I have a 94 gt am parting out. Have most everything. color red. Ok here is the scoop. The car has a bad rod knock. lower end of the motor is going. The interior is in good shape except the drivers seat has the tear that most of them do. passenger seat is good rear seats are good. all the interior trim pieces are in good shape, not perfect. the shifter boot is shot as is usual. the exterior is red. drivers fender is dented badly,coud be repaired i you are an expert. passenger fender has some hail dents but nothing major. hatch is in good shape. wing is chipping but no cracks. no center post. don't have the interior hatch cover. rear disk assembly for conversion is available. Pm me with any requests. I will make parts available to first person that asks, and then by best offer but first asker gets final option on price. HERE IS AN UPDATE. DISC CONVERSION SOLD PENDING PAYMENT REAR SPOILER SOLD PENDING PAYMENT TRANSMISSION SOLD PENDING PAYMENT DRIVER DOOR SOLD PENDING PAYMENT LATEST UPDATE! WEATHER IS GETTING BETTER, AM RESUMING PART OUT I have the following parts already off the car and ready for sale. Front bumper (no emblem) Front bumper support bar (this is the 5mph aluminum crash bar) Front Low beams (no cracks no broken tabs) Radiator Radiator fans Both Doors (just the doors, no glass no electrical) no shipping outside the US (sorry but it's just too much hassle) Door windows Door panels (black 1 speaker in door) Window motors Switch panels for doors with switches (will not separate) Dash plastic trim pieces Rear seats (very good condition) Tweeters and covers Please PM for prices or availablity of other parts not listed. I will try to the best of my ability to give priority by order I recieve pm. |
|
Mar 21, 2008 - 2:17 PM
|
|
|
Enthusiast Joined Feb 7, '07 From Portland, Oregon Currently Offline Reputation: 67 (96%) |
bump (minus the tweeters/covers
)for a kick-ass first class guy. Anyone who needs anything he's got for sale should DEFINITELY buy from him. (This'll be my second purchase w/him.)
-------------------- |
|
Mar 23, 2008 - 8:14 PM
|
|
|
Enthusiast Joined Dec 11, '07 From Davie, Florida Currently Offline Reputation: 4 (100%) |
How much you asking for the front bumper shipped to 33331?.....Also, have you got any pics?
|
|
Mar 23, 2008 - 11:43 PM
|
|
 Enthusiast Joined Feb 22, '04 From USA Currently Offline Reputation: 3 (100%) |
have black carpet for the whole car , not the mats the actual carpet. please pm me. thanks
|
|
Mar 27, 2008 - 12:07 PM
|
|
|
Enthusiast Joined Nov 14, '06 From michigan Currently Offline Reputation: 10 (100%) |
bump
|
|
Mar 30, 2008 - 6:53 PM
|
|
|
Enthusiast Joined Sep 12, '05 From Who says you can't circle race a celica? Currently Offline Reputation: 5 (100%) |
Any word on that passenger fender and the misc other parts?
-------------------- 94 GT Liftback
86 GTS Coupe (Racecar) #99 Crew Chief |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: August 19th, 2025 - 4:21 AM |