 Installing the Lilliput 619GL 7" Touchscreen Monitor |
  |
 Apr 2, 2008 - 4:07 PM
|
 
|
 Enthusiast  Joined Oct 30, '04 From So Cal Currently Offline Reputation: 13 (100%)  |
This post is about fitting the 619GL onto the double din slot
So here's the Lilliput 619 touch screen:  The whole LCD assembly can be forced into between the 2 clips on the panel, but the top hits the air-vent (about 5mm too long).  And the bottom is also too long (about 10mm over):  So, instead of fitting this as is like pittfirefighter did with his 629, we'll have to do some cutting  First we'll have to break the warranty and take this thing apart: From my measurements, I'd have to cut the case by following the existing gutter on the front casing. Not only it'd be a perfect fit, I also get to retain all the screw holes on the front casing:  I went to Home Depot a bought a $5 hacksaw. Oh, wear a mask or something because it smells when cutting the plastic. After the cut and a little filing, I got the front case to look like this:  See, perfect fit  ! Instead of taping it or whatever, I decided to super glue it onto the panel: Since all the screw holes are still there, I can just mount the monitor the way it came from the factory:  And the back casing, I also need to cut the top and the bottom, and some of the sides to make clearance for the center panel clips:  Connected all of the wirings and mounted the back panel. As for the buttons on the bottom, I just taped it on the back of the casing later on:  You like it?   
This post has been edited by tomazws: Apr 12, 2010 - 3:13 AM -------------------- |
|
Apr 2, 2008 - 4:16 PM
|
|
 Enthusiast Joined Jan 18, '08 From Houston Currently Offline Reputation: 7 (100%) |
what about the screens buttons?
-------------------- QUOTE (presure2 @ Nov 6, 2010 - 6:16 AM) Via FB: fcuking awsome!!! D-man FTW! QUOTE (DEATH @ Nov 11, 2008 - 5:40 PM)  Damn D-Man - most impressive. QUOTE (99GT @ Nov 14, 2008 - 4:04 PM) D-Man's post should be a sticky QUOTE (samir0189 @ Nov 4, 2008 - 10:50 AM) LOL, oh boy, you can always count on D-Man for ridiculously hilarious posts. |
|
Apr 2, 2008 - 6:08 PM
|
|
|
Enthusiast Joined Oct 30, '04 From So Cal Currently Offline Reputation: 13 (100%) |
QUOTE(D-Man @ Apr 2, 2008 - 2:16 PM) [snapback]660935[/snapback] what about the screens buttons? After programming the Lilliput to auto-power up, then you don't even need your buttons at all.... I just taped my buttons to the back side of the casing. For auto power up the Lilliput, you can read this post here: http://www.mp3car.com/vbulletin/lcd-displa...ming-guide.html -------------------- |
|
Apr 2, 2008 - 6:22 PM
|
|
 Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
i did not know they existed.. Found this..
http://cgi.ebay.com/LILLIPUT-CAR-PC-Motori...1QQcmdZViewItem -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Apr 2, 2008 - 8:29 PM
|
|
|
Enthusiast Joined Jan 18, '08 From Houston Currently Offline Reputation: 7 (100%) |
okay, cool then.
GOOD JOB!!
-------------------- QUOTE (presure2 @ Nov 6, 2010 - 6:16 AM) Via FB: fcuking awsome!!! D-man FTW! QUOTE (DEATH @ Nov 11, 2008 - 5:40 PM) Damn D-Man - most impressive. QUOTE (99GT @ Nov 14, 2008 - 4:04 PM) D-Man's post should be a sticky QUOTE (samir0189 @ Nov 4, 2008 - 10:50 AM) LOL, oh boy, you can always count on D-Man for ridiculously hilarious posts. |
|
Apr 2, 2008 - 9:25 PM
|
|
 Enthusiast Joined Jun 29, '03 From 캘리포니아 Currently Offline Reputation: 23 (100%) |
Wow thomas looks great! What are you using to operate everything?
--------------------  |
|
Apr 4, 2008 - 11:06 AM
|
|
|
Enthusiast Joined Oct 30, '04 From So Cal Currently Offline Reputation: 13 (100%) |
QUOTE(MaskedMan @ Apr 2, 2008 - 7:25 PM) [snapback]661064[/snapback] Wow thomas looks great! What are you using to operate everything? The touch screen  The screen is auto on/off and the laptop is auto wake up/hibernate.Here are some night Pics:  
This post has been edited by tomazws: Apr 4, 2008 - 11:08 AM -------------------- |
|
Apr 4, 2008 - 10:02 PM
|
|
|
Enthusiast Joined Jun 29, '03 From 캘리포니아 Currently Offline Reputation: 23 (100%) |
Have you had any problems with your screen at all? I've been through 3 screens in my Celica and each one had a different problem. The first one I had didn't do too well in the daytime when my car was hot on the inside. The second one didn't show picture well during the daytime, so on a bright day, I could barely see anything on the screen. The one I have now works great, but when I have the top down, the sunlight will reflect off the screen and blind me
 .
This post has been edited by MaskedMan: Apr 4, 2008 - 10:03 PM -------------------- |
|
Apr 6, 2008 - 7:45 PM
|
|
 Enthusiast Joined Mar 27, '04 Currently Offline Reputation: 14 (100%) |
wow, great job!! i'd never try that with a touch screen... Any pics during the day in the car?
-------------------- ~Daniel~ No Longer Celica Owner.. moved on to a 03 WRX-EJ207
 |
|
Apr 7, 2008 - 11:45 AM
|
|
|
Enthusiast Joined Oct 30, '04 From So Cal Currently Offline Reputation: 13 (100%) |
During the day is OK. Minor reflections. I'll have pictures.
-------------------- |
|
Apr 7, 2008 - 12:07 PM
|
|
 Enthusiast Joined May 25, '06 From Hong Kong Currently Offline Reputation: 256 (100%) |
QUOTE(tomazws @ Apr 8, 2008 - 12:45 AM) [snapback]662222[/snapback] During the day is OK. Minor reflections. I'll have pictures. Buddy... masterpiece, need one of those, when is your ETA to HK? -------------------- |
|
Apr 7, 2008 - 1:01 PM
|
|
|
Enthusiast Joined Oct 30, '04 From So Cal Currently Offline Reputation: 13 (100%) |
QUOTE(vincent_doggy @ Apr 7, 2008 - 10:07 AM) [snapback]662225[/snapback] QUOTE(tomazws @ Apr 8, 2008 - 12:45 AM) [snapback]662222[/snapback] During the day is OK. Minor reflections. I'll have pictures. Buddy... masterpiece, need one of those, when is your ETA to HK? Buddy, Lilliput is "Dai Look Fall". I found this info for you: Headquarters/Head Office Hong Kong Golden Sun Electronics Development Co Unit D, 11/F, Block B Marvel Industrial Building 17-23 Kwai Fung Crescent, Kwai Chung NT Hong Kong SAR Tel: (852 ) 24333985 Fax: (852 ) 24344805 Key Contact: Mr Wang, Nanjin or Zhangzhou Lilliput Electronics Co. Ltd Optoelectronic Mansion Hengsan Road Lantian Industrial Zone Zhangzhou Fujian China 363005 Tel: (86 596) 2109323 (86 596) 2109815 Fax: (86 596) 2109815 -------------------- |
|
Apr 7, 2008 - 9:55 PM
|
|
|
Enthusiast Joined May 25, '06 From Hong Kong Currently Offline Reputation: 256 (100%) |
QUOTE(tomazws @ Apr 8, 2008 - 2:01 AM) [snapback]662242[/snapback] QUOTE(vincent_doggy @ Apr 7, 2008 - 10:07 AM) [snapback]662225[/snapback] QUOTE(tomazws @ Apr 8, 2008 - 12:45 AM) [snapback]662222[/snapback] During the day is OK. Minor reflections. I'll have pictures. Buddy... masterpiece, need one of those, when is your ETA to HK? Buddy, Lilliput is "Dai Look Fall". I found this info for you: Headquarters/Head Office Hong Kong Golden Sun Electronics Development Co Unit D, 11/F, Block B Marvel Industrial Building 17-23 Kwai Fung Crescent, Kwai Chung NT Hong Kong SAR Tel: (852 ) 24333985 Fax: (852 ) 24344805 Key Contact: Mr Wang, Nanjin or Zhangzhou Lilliput Electronics Co. Ltd Optoelectronic Mansion Hengsan Road Lantian Industrial Zone Zhangzhou Fujian China 363005 Tel: (86 596) 2109323 (86 596) 2109815 Fax: (86 596) 2109815 Thanks for your info., but I really need your craftsmanship...for installation -------------------- |
|
Apr 10, 2008 - 6:46 PM
|
|
|
Enthusiast Joined Oct 30, '04 From So Cal Currently Offline Reputation: 13 (100%) |
OK Vincent I'll bring it over this summer or something
I still haven't taken any pictures yet as my car's in the shop right now. -------------------- |
|
Apr 10, 2008 - 7:06 PM
|
|
 Enthusiast Joined Sep 13, '05 From Kansas Currently Offline Reputation: 9 (100%) |
I fabricated a XENARC screen to my center dash. The great thing is the XENARC is built with auto-power on functions. I will upload a picture when the car gets back from the body shop.
|
|
Apr 10, 2008 - 7:44 PM
|
|
|
Enthusiast Joined Jun 29, '03 From 캘리포니아 Currently Offline Reputation: 23 (100%) |
Why is everybodys' car in the shop
. I wanna see pictures .
-------------------- |
|
Apr 10, 2008 - 9:47 PM
|
|
 Enthusiast Joined Oct 7, '06 From wyomissing pennsylvania Currently Offline Reputation: 2 (100%) |
exactly what all is needed for one of these... and has anyone made a carputer off a linux system?
and what programs are you using on the laptop to control everything? -------------------- you know why they put sheep at the edge of a cliff.... that way they push back!
    (2:27:32 AM) edit: please f*cking work, f*ck, sh*t, piss (2:28:08 AM) edit: that did the trick |
|
Apr 11, 2008 - 2:55 AM
|
|
|
Enthusiast Joined Oct 30, '04 From So Cal Currently Offline Reputation: 13 (100%) |
QUOTE(MaskedMan @ Apr 10, 2008 - 5:44 PM) [snapback]663410[/snapback] Why is everybodys' car in the shop . I wanna see pictures .Lady in the van made illegal lane change straight into my passenger side...  -------------------- |
|
Apr 11, 2008 - 8:05 AM
|
|
|
Enthusiast Joined Jan 18, '08 From Houston Currently Offline Reputation: 7 (100%) |
QUOTE(tomazws @ Apr 11, 2008 - 2:55 AM) [snapback]663506[/snapback] Lady in the van made illegal lane change straight into my passenger side... What a bit~ i say you roll on her. 
-------------------- QUOTE (presure2 @ Nov 6, 2010 - 6:16 AM) Via FB: fcuking awsome!!! D-man FTW! QUOTE (DEATH @ Nov 11, 2008 - 5:40 PM) Damn D-Man - most impressive. QUOTE (99GT @ Nov 14, 2008 - 4:04 PM) D-Man's post should be a sticky QUOTE (samir0189 @ Nov 4, 2008 - 10:50 AM) LOL, oh boy, you can always count on D-Man for ridiculously hilarious posts. |
|
Apr 11, 2008 - 4:40 PM
|
|
|
Enthusiast Joined Sep 13, '05 From Kansas Currently Offline Reputation: 9 (100%) |
QUOTE(MaskedMan @ Apr 10, 2008 - 7:44 PM) [snapback]663410[/snapback] Why is everybodys' car in the shop . I wanna see pictures .Summers coming my friend. I had a great deal of work done. The center dash piece I frabricated to look factory. I will upload some pics of it and im willing to take it apart to show how its is done. It really quite simple. but takes some effort sanding and such. I like what tomazws has done. I just wanted a factory look. to do so you need to buy an extra monitor bezel from the factory. In my case Xenarc. it was only $27 and then some Dynatron, sandpaper, primer, paint and lots of elbox grease. with a bit of effort I have a center dash with a radio head unit a touchscreen AND my clock. I had to redirect air flow...but its a vert...i really dont care. |
|
Apr 11, 2008 - 9:51 PM
|
|
|
Enthusiast Joined Jun 29, '03 From 캘리포니아 Currently Offline Reputation: 23 (100%) |
QUOTE(tomazws @ Apr 11, 2008 - 12:55 AM) [snapback]663506[/snapback] QUOTE(MaskedMan @ Apr 10, 2008 - 5:44 PM) [snapback]663410[/snapback] Why is everybodys' car in the shop . I wanna see pictures .Lady in the van made illegal lane change straight into my passenger side... Omg im so sorry to see that . Your car was in super l33t condition last time I saw it . -------------------- |
|
Apr 15, 2008 - 8:29 PM
|
|
|
Enthusiast Joined Oct 3, '07 From Ireland Currently Offline Reputation: 0 (0%) |
Damn I bet there was some 18+ words used when that happened!!
I picked up a liliput 629 and was wonderin how to put that into the car an make it oem looking... one just solved my worries lad just needs to get me some supa glueCould you tell me if that screen protrudes far into the dash as I've a double din case that I want to but a computer in? Im a bit busy till the summer to start taking things apart. |
|
Apr 15, 2008 - 11:48 PM
|
|
 Enthusiast Joined Oct 12, '05 From Texas Currently Offline Reputation: 59 (100%) |
Sorry to hear about your car. I gotta say though the install looks pretty OEM from the front - nice job!
-------------------- Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJ
Current: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor |
|
Nov 18, 2008 - 1:00 AM
|
|
 Enthusiast Joined Mar 22, '07 From Houston, TX Currently Offline Reputation: 4 (100%) |
any new pictures?
-------------------- QUOTE "And, as always, your friendship, help, and dedication to the advancement of Texas Celica dominance is GREATLY appreciated. Thanks bro." -DEATH 1994 GT: V6 swap, 5speed E53 W/ LSD, All Power, now RED 1995 ST: SOLD @273k miles, Auto, all power, CarPC, White 1994 ST: Totaled, 5spd, all power, Red RIP 07/09/09 @ 241,810 1994 Lexus LS400: This is my new DD |
|
Nov 18, 2008 - 4:13 PM
|
|
|
Enthusiast Joined Oct 2, '08 From New Zealand Currently Offline Reputation: 0 (0%) |
Grat Job
 Man WOW this blows me away....
-------------------- WWSideWinder - 1996 - 3S-FE - Auckland New Zealand
 ~ signature made by jaws4god ~ Have a look at my thread for updates on my progress. "http://www.6gc.net/forums/index.php?showtopic=63338&hl=0" |
|
Nov 18, 2008 - 11:26 PM
|
|
 Enthusiast Joined May 6, '05 From PA Currently Offline Reputation: 4 (100%) |
Wow... I'm doing this... I got a busted 7" motorized vga, gears are busted up and I'm looking for something cleaner looking. Great Idea, bookmarked.
-------------------- |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 6th, 2025 - 8:51 AM |