![]() |
![]() ![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%) ![]() |
My idiot light came on for the oil pressure. I do have an aftermarket gauge installed and it showed normal PSI. Anyway, when I went to install a new oil sending switch thinking it was faulty, the housing with the wire broke at the wire. How do I fix this? Cost to have it done professionally?
|
![]() |
|
![]() Enthusiast ![]() ![]() Joined Mar 26, '09 From Longmont, CO. Currently Offline Reputation: 0 (0%) ![]() |
if the switch is the part that broke just replace the switch
-------------------- Lift Addict!! ^_^
---------------------- ![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%) ![]() |
no, it was the plastic switch's housing that you would snap back on to the switch once you replaced it. The housing has a wire going into it and the wire snapped out.
|
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) ![]() |
no, it was the plastic switch's housing that you would snap back on to the switch once you replaced it. The housing has a wire going into it and the wire snapped out. pm dr tweak, he can get any connector you want. its a one wire thing, very easy to cut and splice. -------------------- Former Team 5SFTE pro member ;)
![]() 13.6@108MPH, 5SFTE Powered |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Mar 26, '09 From Longmont, CO. Currently Offline Reputation: 0 (0%) ![]() |
no, it was the plastic switch's housing that you would snap back on to the switch once you replaced it. The housing has a wire going into it and the wire snapped out. pm dr tweak, he can get any connector you want. its a one wire thing, very easy to cut and splice. X2! ![]() -------------------- Lift Addict!! ^_^
---------------------- ![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%) ![]() |
thanks, will do.
I tried to pm dr tweak and couldn't locate his member name. This post has been edited by 6G96GT: Apr 17, 2009 - 10:47 PM |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%) ![]() |
Finally got it fixed. Had to go to a junkyard and snip the cap and wire from a Lexus that matched my sending unit. It tested and works perfectly. No more probs.
![]() |
![]() ![]() |
Lo-Fi Version | Time is now: July 22nd, 2025 - 1:24 PM |