HIDs don't turn on... Options

[96bluevert]

I recieved my 8000k HID kit Friday and installed it yesterday. I double checked that all the connections were where they were supposed to be and tightened. Then I try to turn on the lights, and nothing hapens. The side markers were on as they should be, the switched was turned all the way foward. I then went to the store to get new fuses (just in case one was blown). Replaced both fuses, tried to turn them on and still nothing.

Is there anything else I should check or that could be causing the lights to not work?

[Culpable04]

you need to check 2 things

1 - the clips for 9006 have to be pushed all the way in, sometimes they look to be in, but if you push HARD you'll notice it'll go a little further in

2- you have a warranty on them.

[96bluevert]

Culp, thanks man, you saved me from more of a hassel.

It was just that the clip wasn't tightened enouph

But even if it was a problem with the bulbs or ballasts, I got them from Michelle and she was kind of enouph to offer sending another kit if these ones were really defective.