FS: Complete 95 ST Part Out, Location: Vestal, NY Options

[floydian_lunatic]

I'm parting out my stock 95 ST coupe. The car body is blue/purple. Interior is black w/leather seats. Automatic Tranny.

Pics sent upon request! I would prefer pick up on large/heavy items - although we may be able to work out oversize shipping. I'm also willing to meet up half way as long as the parts will fit in my WRX and you're not *too* far. I'm located in Vestal, NY.

Doors - Sold
Hood - Sold
Driver Fender - Sold
Trunk/Spoiler - Sold
Rear Bumper (needs paint) - $40 picked up
Pass Front Fender - $40 picked up
Front Bumper - Sold
Drivers Lo beam and high beam - Sold
Pass Lo Beam - $70 shipped
Pass High Beam - $50 shipped
Carpet (black) - $30 picked up (has hole on drivers side thats covered by floor mat and has stain in rear passenger side also covered by floor mat)
Moonroof - $80 picked up
Tail Lights - $40 a piece shipped
Interior trim black (vents, center/shifter surround, door handles) - pending sale
Interior door panels, dashboard, pillars etc still avail - PM for prices.
Driver side door panel - Sold
Passenger side door panel - $40 + shipping
Front speakers - pending sale
Side View Mirror - Driver - Sold
Side View Mirror - Pass - $30 shipped (black, power, has chipped paint)
Headlight Gaskets - Sold
Antenna+Motor - Unavail.
Seats - See reply below for pics and price
If you need something else, just ask! I just listed some of the major stuff.

Both airbags are still good and available.
Let me know if these prices seem unfair - I haven't really checked what these are going for.

Thanks for looking!:)

This post has been edited by floydian_lunatic: Jul 1, 2009 - 8:51 PM

[SPID33]

you did it now let see what happens.

[celicast95]

i need both front fenders if the sale doesnt go through on it.

[conus00]

What shape is rear leather seat (fading, holes, cracks in leather)? Any chance of pictures?
Also, do you still have OEM inside rear view mirror (black)?
Thx.

This post has been edited by conus00: May 13, 2009 - 4:00 PM

[Superaison]

check ur pms

[floydian_lunatic]

What shape is rear leather seat (fading, holes, cracks in leather)? Any chance of pictures?
Also, do you still have OEM inside rear view mirror (black)?
Thx.

Leather seats have seen better days, so I'm not expecting much for them. The driver's seat stitching came apart along one of the seams, so it has a hole in it. The passenger seat is in good shape. The rear passenger seat is in good shape with the exception of some cracks at the top crest of the seat back from the sun.

Passenger Seat


Drivers Seat


Rear Passenger Seat Bottom


Rear Passenger Seat Back 1


Rear Passenger Seat Back 2


Seat prices (obo) (picked up):
Drivers: $30
Passenger: $60
Rear Passenger (3 pieces) $40

Also, do you still have OEM inside rear view mirror (black)?
Thx.

My inside rear view mirror is actually gray, not black (just the way it came when I bought the car).

[6GenCelicaST]

Do you have the sunroof motor w/ relay available?

[Jaws4God]

is this a coupe or hatchback??

I really need a set of back strut plastic covers..

[Bigblock]

Pics of doors please if this is a hatchback!!??!! And rear bumper cover Please!!??!!

This post has been edited by Bigblock: May 13, 2009 - 10:18 PM

[floydian_lunatic]

Do you have the sunroof motor w/ relay available?

Yes, PM sent

is this a coupe or hatchback??

I really need a set of back strut plastic covers..

Sorry, this is a coupe

[Joe_1985]

where are u located at?

[floydian_lunatic]

where are u located at?

Vestal, NY - mapquest it

[Joe_1985]

nevermind thought by your s/n u were located in florida, i was gonna come get the seats but your to far away

[6G96GT]

I'm parting out my stock 95 ST coupe. The car body is blue/purple. Interior is black w/leather seats. Automatic Tranny.

Pics sent upon request! I would prefer pick up on large/heavy items - although we may be able to work out oversize shipping. I'm also willing to meet up half way as long as the parts will fit in my WRX and you're not *too* far. I'm located in Vestal, NY.

Doors - $80 apiece picked up
Hood - Pending Sale
Driver Fender - Pending Sale
Rear Bumper (needs paint) - $40 picked up
Pass Front Fender - $40 picked up
Front Bumper - Pending Sale
Drivers Lo beam and high beam - pending sale
Pass Lo Beam - $70 shipped
Pass High Beam - $50 shipped
Carpet (black) - $30 picked up (has hole on drivers side thats covered by floor mat and has stain in rear passenger side also covered by floor mat)
Moonroof - $80 picked up
Tail Lights - $40 a piece shipped
Interior trim black (vents, center/shifter surround, door handles) - Pending Sale
Interior door panels, dashboard, pillars etc still avail - PM for prices.
Side View Mirror - Driver - Sold
Side View Mirror - Pass - $30 shipped (black, power, has chipped paint)
Antenna+Motor - Unavail.
Seats - See reply below for pics and price
If you need something else, just ask! I just listed some of the major stuff.

Both airbags are still good and available.
Let me know if these prices seem unfair - I haven't really checked what these are going for.

Thanks for looking!:)

Can you cut me out (from the wire harness) the switch that snaps onto the oil pressure sending unit? I need at least 2" of wire attached to it.

[kash1355]

could you post pics of both doors (mostly the bottom and back side) I just want to see if theres any rust on them because mine are both in really bad shape.

[vi-tuyen]

I need the hatch tray and the 2 clips to hold it to the car. Right now I really need the 2 plastic clips . how much for the 2 clips? 76013

[floydian_lunatic]

DOOR PICS:

Driver Side:

There was some pine tar that dripped onto the door and discolored the paint:

The door bottom is in good shape (theres about 1/4 on rust lining the very bottom of the door):


Inside of the door



Passenger Side:

The door has about 1/4 to 1/2 of rust lining the very bottom:


Inside the door

[kash1355]

Thanks for the pics ... I'm gonna take the pics to my body shop to see if its cheap to fix (my doors are so bad that they'd have to cut out the bottom and weld a new piece of sheet metal)

I'll get back to you.

[slyy]

how much u want for your speed meter

[dagreatone]

i'll take ur steering wheel

[Koryu]

Hey this might be alot to ask but i am in dire need of this big time, ok i bought a 95 st for 300, i took the front bumper off and fenders and realized that the there was no brackets to hold the headlights in they were being held in with a bolt and zipties. so basically what i am asking is, where the radiator is, the support bar its attach too, i need the front end cut off it sounds like alot of work but it isnt, all ur doing is cutting through the side walls, then down and then over top of the front crash bar thats it, its easy i already did it on another car before. A recipricating saw works best. I am in dire need of this, because i cant even mount my headlights without doing this, and i own an rx7 as well, u should know they are 2 seats lol and i have a 4 year old son, so im a lil screwed at the moment. If u want u can call my cell to discuss it futher and i can take pics to show u what u would need to cut and how if u want. its not hard at all like i said. I live in waynesboro,pa 17268 its about a 4 hour drive to vetstal ny My cell is 717-816-1053 plz get in touch with me about this asap i would really appreciate it. So basically all i need is from the radiator support and down to the crash bar cut off, so through the fender walls straight down, across the crash bar, and thats it i just need that lil section.

-Matt

[ComaDave]

PM Sent

[Koryu]

u still there?

[spy00005]

do you have the dash cluster wat condition and how much for it.

[BonzaiCelica]

do you have the interior light, im talking about the whole assembly. the light on the inside of the roof that has two bulbs. the one where you can switch between door and off. So the lights go on when the doors open. if so how much?

[floydian_lunatic]

do you have the interior light, im talking about the whole assembly. the light on the inside of the roof that has two bulbs. the one where you can switch between door and off. So the lights go on when the doors open. if so how much?

I do, but mine also has the controls to the moon roof as part of the assembly. If you don't have a moon roof, you probably have a different part. Let me know if you need one with the moon roof controls.

[floydian_lunatic]

do you have the dash cluster wat condition and how much for it.

PM Sent.

[gabyz]

I need the Shifter gauge and that cover slip that goes under it. Still have it?
Thanks

[RCRunner]

PM sent ...

[ILuvMyCelica95]

Those seats still available?

[floydian_lunatic]

Those seats still available?

Yes

[RCRunner]

PM sent ... I'll take 'em

[paul52]

hey i need the switch assy, the headlamp dimmer(with switch for fog lights) and the turn signal( with rear wiper witch)
pm me for price, i can send u a photo of what i need too just pm me
thanks
paul

[conus00]

What color is the carpet? And what shape?

[DmVinny]

whats the condition of the passenger door panel?

[floydian_lunatic]

What color is the carpet? And what shape?

Carpet is black and has two problems: a hole on the drivers side that's completely covered up by the floor mat and some sort of bleach stain on the rear passenger side (covered up mostly by the floor mat). Here are some pics while it was still in the car:
Hole on drivers side:


Bleach stain on rear passenger side:

What the floor mat covers:

[mitch1911]

I am interested in the following parts as well as others. I will PM you for more questions. Thanks.

Pass Lo Beam - $70 shipped
Pass High Beam - $50 shipped


Both airbags are still good and available.
Let me know if these prices seem unfair - I haven't really checked what these are going for.

Thanks for looking!:)
[/quote]