WTB: Front end or parts car., headlights, bumper, rad support, re-bar, fenders, Options

[Badkarma]

things i need...

Radiator support (if the spot welds have been drilled out already)
Headlights (driver-side high beam, and low beam) will buy all four if package deal
Headlight seals
Front bumper(pre facelift, or facelift.. doesnt matter.)along with all components
Re-enforcement bar & bolts
JDM sidemarkers (both sides, clear or amber)
motor mounts for 5spd 5sfe
more to be added soon.

if you havea parts car with good front end. lmk.

Thanks, Erich

[NgoFcukinWay]

I have the low beams available. one included the headlight seal while the other one doesn't. Do you have a pic of the Radiator support that you need? I may have one of those available too.

[Agent21]

If you need sheetmetal like you can get it from the dealer as NOS. I would highly recommend it since it will be formed right and minus punching your own spot weld holes it is ready to go. https://www.trademotion.com/partlocator/ind...m?siteid=213804 there is also a kansas site that i know will ship sheet metal

[Badkarma]

tomorrow ill get a pic of the rad support showing what i need exactly.

This post has been edited by Badkarma: Sep 25, 2009 - 10:13 PM

[Badkarma]

these are the exact parts i need.
the rebar, and both impact absorbers and bolts to hold them on.

left headlight support

left impact absorber and bolts

Right impACT absorber

id like to replace this part, but i doub someone has one already drilled out and ready to ship. but if you do, this is it.

another picture of it. its pretty damaged, repairable, but id rather replace.