FS: two GT's parting out!, drum to disc, airbags, heads, more! Options

[pittfirefighter]

ok guys heres the big things right now that i have... two full GT's parting out!
ask for any other parts... lots available... as of right now, NO front end body parts available...
NO FENDERS, NO BUMPERS, NO HEADLIGHTS - DO NOT EVEN ASK.

(1 SOLD, 1 still available) drum to disc conversions available... this is the full setup, rotors, pads, calipers, hoses, front and back, ebrake hardware, porp valve. - $300 + shipping

(1) full airbag setup (w/o ECU)... pass airbag, driver 4 post wheel w/ airbag, both sensors, clips for pass airbag - $150 + shipping

HEADS:




(1) recently rebuilt 99 5sfe head, great cams, ZERO miles since rebuild, still in plastic bag - $600 + shipping


(1) set of 5sfe cams - good condition - $150 + shipping


(1) set of 3sgte cams - good condition - $150 + shipping


(1) 5sfe manual s54 tranny, just under 100k miles, from a 99 GT - came off running great w/ good clutch - $400 + shipping


(1) 5sfe automatic tranny, 87k miles, from a 97 GT, came off running and shifting smooth - $400 + shipping

(1) prefacelift spoiler (black) - 2 post - offer




(1) postfacelift spoiler (white) - 3 post - OBO

(1) CAI ready for GT... custom cut ready for install... w/ or w/o K&N filter - offer




any other parts you need let me know!







all parts are first come first serve... ALL PARTS ARE OBO

DO NOT POST IN THIS THREAD ABOUT CC UNITS - PLEASE PM ME ABOUT THEM OR EMAIL ME... it gets too cluttered and i hate sorting through the posts

This post has been edited by pittfirefighter: Jan 8, 2010 - 10:59 AM

[Fate]

what's the status about the things we talked about in PM?

[LewFX]

wheres my flex pipe to cat!!!

[pittfirefighter]

haha pressure closed the other thread cause i was so backed up with CC orders, everything is taken care of now, will grab those items at the garage today

Today i am picking up the following
Fate - AC condenser, Rad Fans, Lower Driver Control Arm
Raves44 - Shifter
Culpable - Passenger Front Knuckle
LewFX - Downpipe to Cat

Anyone else needs anything please let me know

This post has been edited by pittfirefighter: Oct 19, 2009 - 11:41 AM

[A_N_T_H_O_N_Y]

Can I get some pics of the exhaust system? And would you ship it?

[chimchar]

PM sent

[Fate]

haha pressure closed the other thread cause i was so backed up with CC orders, everything is taken care of now, will grab those items at the garage today

Today i am picking up the following
Fate - AC condenser, Rad Fans, Lower Driver Control Arm
Raves44 - Shifter
Culpable - Passenger Front Knuckle
LewFX - Downpipe to Cat

Anyone else needs anything please let me know

how are the crossbar motor mounts?

[pittfirefighter]

they are in good condition.. i would be happy to ship the exhaust... just pulled it off today, it is brand newish

parts requested... lower control arm has not yet been removed





This post has been edited by pittfirefighter: Oct 19, 2009 - 3:59 PM

[95st-celica]

power antena shipped to 19152....13 bucks?

[pittfirefighter]

none of the antennas work, they have been in the down position for years

[6gtfour]

blk spoiler pics n price?

[mgnt232]

I have a 94 celica ST I hope the part is the same. UNder where the radio is supposed to be there is a small plastic piece that fits in nicely under it. Some stupid kit took it out b4 i got the car >:( and I need the piece. if you could send my a pic of what the piece looks like under I offer $10 shipped? (u live in the US right) the piece i believe has 2 small bracket like things that hold in place (they connect the thing to the inner part) which i will need as well. thanks alot-

ok guys heres the big things right now that i have... two full GT's parting out!
ask for any other parts... lots available... as of right now, NO front end body parts available...
NO FENDERS, NO BUMPERS, NO HEADLIGHTS - DO NOT EVEN ASK.

(2) drum to disc conversions available... this is the full setup, rotors, pads, calipers, hoses, front and back, ebrake hardware, porp valve. - $300 + shipping

(1) full airbag setup... pass airbag, driver 4 post wheel w/ airbag, ECU (ecu is from a 99, small size ecu, part number - 89170-20090), both sensors, clips for pass airbag - $200 + shipping

(1) recently rebuilt 99 5sfe head, great cams, ZERO miles since rebuild, still in plastic bag - $600 + shipping

(1) set of 5sfe cams - good condition - $150 + shipping

(1) 5sfe manual s54 tranny, just under 100k miles, from a 99 GT - came off running great w/ good clutch - $400 + shipping

(1) 5zigen catback exhaust system for GT, sounds great and low, not high and ricey, flowmaster style muffler - OBO

(1) prefacelift spoiler (black) - 2 post - OBO

(1) postfacelift spoiler (white) - 3 post - OBO

any other parts you need let me know!

all parts are first come first serve... ALL PARTS ARE OBO

DO NOT POST IN THIS THREAD ABOUT CC UNITS - PLEASE PM ME ABOUT THEM OR EMAIL ME... it gets too cluttered and i hate sorting through the posts

[pittfirefighter]

I have a 94 celica ST I hope the part is the same. UNder where the radio is supposed to be there is a small plastic piece that fits in nicely under it. Some stupid kit took it out b4 i got the car >:( and I need the piece. if you could send my a pic of what the piece looks like under I offer $10 shipped? (u live in the US right) the piece i believe has 2 small bracket like things that hold in place (they connect the thing to the inner part) which i will need as well. thanks alot-

If you are referring to the pocket that goes under the radio, then yes i have one, $17 shipped and its yours, including brackets for radio

black spoiler is a stock two post, it is still on the car, has light scratches, pics in my profile, taking best offer on it

This post has been edited by pittfirefighter: Oct 20, 2009 - 6:32 AM

[mgnt232]

I'll give you $15 shipped? I need your email for paypal. thanks-

I have a 94 celica ST I hope the part is the same. UNder where the radio is supposed to be there is a small plastic piece that fits in nicely under it. Some stupid kit took it out b4 i got the car >:( and I need the piece. if you could send my a pic of what the piece looks like under I offer $10 shipped? (u live in the US right) the piece i believe has 2 small bracket like things that hold in place (they connect the thing to the inner part) which i will need as well. thanks alot-

If you are referring to the pocket that goes under the radio, then yes i have one, $17 shipped and its yours, including brackets for radio

black spoiler is a stock two post, it is still on the car, has light scratches, pics in my profile, taking best offer on it

[pittfirefighter]

I'll give you $15 shipped? I need your email for paypal. thanks-

I have a 94 celica ST I hope the part is the same. UNder where the radio is supposed to be there is a small plastic piece that fits in nicely under it. Some stupid kit took it out b4 i got the car >:( and I need the piece. if you could send my a pic of what the piece looks like under I offer $10 shipped? (u live in the US right) the piece i believe has 2 small bracket like things that hold in place (they connect the thing to the inner part) which i will need as well. thanks alot-

If you are referring to the pocket that goes under the radio, then yes i have one, $17 shipped and its yours, including brackets for radio

black spoiler is a stock two post, it is still on the car, has light scratches, pics in my profile, taking best offer on it

let me get you a picture, we will go from there

[pittfirefighter]

BUMP! hey guys i am heading to the garage tomorrow morning... get your requests in... i will be pulling parts and taking pics!

[shoteh]

Do you still have the big AC condenser? Would it fit a 94 gt? Also interested in any of the AC lines perferably the ones that goes to and from the dehydrator. Would you be willing to cut off the front steel bar that the bumper screws into the top? I need one Let me know shipping to MN 55444 if possible thanks.

[pittfirefighter]

already cut it off, the condenser thats in the one pic?? that was pulled off for fate but i do have another available... i also have all of the AC lines available they do bend very easily though so it would have to be packed well and shipped carefully

[GriffGirl]

I really could use the proportioning valve off that there car... please PM me if available!

[LewFX]

ship it! i need it soon so i can finish my car up

[cjh4l22]

need GT fuel lines (to/from fuel rail)
turbo return lines w/bung at block (you said previously you might have them?)
shift arm (from tranny gear selector to cables)
passenger mount (entire) from frame->tranny
oh and outter shafts for 3s swapping if you have them? (the v6 camry or all-trac outters)
shipped to 45248, thanks.

[mgnt232]

Can you get me the pic for this? No rush just making sure you haven't forgotten, these forums get messy lol

I'll give you $15 shipped? I need your email for paypal. thanks-

I have a 94 celica ST I hope the part is the same. UNder where the radio is supposed to be there is a small plastic piece that fits in nicely under it. Some stupid kit took it out b4 i got the car >:( and I need the piece. if you could send my a pic of what the piece looks like under I offer $10 shipped? (u live in the US right) the piece i believe has 2 small bracket like things that hold in place (they connect the thing to the inner part) which i will need as well. thanks alot-

If you are referring to the pocket that goes under the radio, then yes i have one, $17 shipped and its yours, including brackets for radio

black spoiler is a stock two post, it is still on the car, has light scratches, pics in my profile, taking best offer on it

let me get you a picture, we will go from there

[Random_Stranger]

All I want is sunroof motor + Switches and a stinkin' Radio Trim Bezel. But nobody wants to actually come through and sell me one. Have you any?

[pittfirefighter]

have the sunroof stuff, do not have a radio bezel, those things are impossible to come by... PM me your offer for the sunroof stuff

tomorrow i will have all of the updated pics, also shipment going out tomorrow as well, including your stuff - lew

cjh - i am going through all my 3s stuff for you tomorrow

This post has been edited by pittfirefighter: Oct 22, 2009 - 3:45 PM

[celicast184]

what year is the GT's? im interested in the sideskirts, do you have them?

[pittfirefighter]

no sideskirts

[captb]

What are the conditions of the driver and passenger doors? How much shipped to 96789?

[Agent21]

GT shifter cables? How much to Charlotte, NC?

[pittfirefighter]

hey guys sites been down for a while for me, i have some catching up to do now, NO cables, doors are in pretty bad condition, both sets have sig. dents

[jordisonjr]

Do you have the front ABS sensors?

[pittfirefighter]

Do you have the front ABS sensors?

sensors at the spindles/hubs/knuckles? they are impossible to get out without breaking them. they have to be pressed in

[captb]

hey guys sites been down for a while for me, i have some catching up to do now, NO cables, doors are in pretty bad condition, both sets have sig. dents

dents i can deal with... rust i cannot. how much shipped?

[jordisonjr]

Do you have the front ABS sensors?

sensors at the spindles/hubs/knuckles? they are impossible to get out without breaking them. they have to be pressed in

Yea thats what i needed, so thats something I couldn't get used from someone parting out?

[pittfirefighter]

ABS Sensors - most likely not, they need to be pressed and are an extremely tight fit so they don't move... and they break really easy when you try to pull them out

i will get you some pics of the doors soon...
pics requested...








This post has been edited by pittfirefighter: Oct 27, 2009 - 5:04 PM

[cjh4l22]

need GT fuel lines (to/from fuel rail)
turbo return lines w/bung at block (you said previously you might have them?)
shift arm (from tranny gear selector to cables)
passenger mount (entire) from frame->tranny
oh and outter shafts for 3s swapping if you have them? (the v6 camry or all-trac outters)
shipped to 45248, thanks.

just looking for an update. really need this, thanks.
oh and i see the shift arm in the picture with the tranny

[pittfirefighter]

what bung at the block do you need?? the coolant lines are connected to the water passage running from the water pump to the firewall...

[cjh4l22]

the one that returns coolant or perhaps oil... from the turbo to the block. sits about center (or slightly right of) below turbo.

[njccmd2002]

sent you a pm

[pittfirefighter]

the one that returns coolant or perhaps oil... from the turbo to the block. sits about center (or slightly right of) below turbo.

cjh.... ok the coolant lines run from the passage from the water pump to the firewall.. both of the lines have nipples for the hoses for the coolant lines to turbo

as for the oil lines... they run from a banjo style bolt on the right hand side of the block (not a bung, its a threaded hole) to the turbo, then out the bottom of the turbo to the oil pan... you need to pull the oil pan and tap it for a bung for the return line... i'm still trying to figure out what you need.

anybody that understands what he is looking for?? please feel free to chime in

[cjh4l22]

the one that returns coolant or perhaps oil... from the turbo to the block. sits about center (or slightly right of) below turbo.

cjh.... ok the coolant lines run from the passage from the water pump to the firewall.. both of the lines have nipples for the hoses for the coolant lines to turbo

as for the oil lines... they run from a banjo style bolt on the right hand side of the block (not a bung, its a threaded hole) to the turbo, then out the bottom of the turbo to the oil pan... you need to pull the oil pan and tap it for a bung for the return line... i'm still trying to figure out what you need.

anybody that understands what he is looking for?? please feel free to chime in

go here = http://www.turbomr2.com/MR2/HowTo/Engine_U...he_3SGTE-02.htm
scroll to the bottom.. from the bottom up, the 2nd and 4th pictures up the page. need everything from the turbo->that threaded hole.
lol thanks for your help, sorry about the confusion. any news on the drivers side mount? whole thing please.

[pittfirefighter]

that nipple he has on there is aftermarket... that is the feed line for oil to the turbo... stock it is a banjo bolt... i don't have any extra of the bolt... i can show you what it looks like if you please but they are hard to find... you're better off doing a custom fitting like the one in the picture... there is NO bung for that line

[cjh4l22]

fair enough, well let me know about the rest then and i'll figure that out later.

[pittfirefighter]

BUMP!! guys still plenty of parts left... first page updated

[mgnt232]

Reply to my message please. I sent money

BUMP!! guys still plenty of parts left... first page updated

[barterj]

Are the motor mounts for the GT still available, if so how many miles were on the car they came out of?

[pittfirefighter]

101k.... no tears or stress marks on the mounts... i have two sets of mounts actually... these ones are the lower mileage ones

[captb]

how much for the wiring harness that connects to the oem radio shipped to 96789?

This post has been edited by captb: Nov 8, 2009 - 1:44 AM

[pittfirefighter]

which harness?? the amplifier harness? the actual dash harness?

[96stgreendemon]

How much for the tinted gas cap? Pm me

[captb]

which harness?? the amplifier harness? the actual dash harness?

the radio connector that connects to this, toyota wiring harness. the PO decided to splice the wires when he got an aftermarket stereo rather than getting a harness.

[schmooot]

are the headlights still there/intact? I'm in desperate need of both low beam units

[pittfirefighter]

NO FENDERS, NO BUMPERS, NO HEADLIGHTS - DO NOT EVEN ASK.

i will think about the wiring harness... i would have to cut it off and that would leave that entire harness useless.... shouldnt be a problem though... that harness isn't needed (purchased) too often

tinted gas cap??

This post has been edited by pittfirefighter: Nov 9, 2009 - 10:15 AM

[diegohiga]

could you send me pics of the drum to disc conversion to diegohigax@hotmail.com plz?

[captb]

no headlights... i will think about the wiring harness... i would have to cut it off and that would leave that entire harness useless.... shouldnt be a problem though... that harness isn't needed (purchased) too often

tinted gas cap??

aint a big deal if you dont want to part. i can install um either way. just figured id make my life a bit easier after the fourth hu swap.

[pittfirefighter]

guys i don't have pics of the drum to disc swap.... all the parts are still on the GTs, everything is in good working condition, all calipers function properly, all rotors are in good condition, i will take pics of it when it gets pulled off the car... i am not pulling any of those parts though until someone shows some real interest... its a lot of parts and a lot of my time... they are all stock parts...

[barterj]

101k.... no tears or stress marks on the mounts... i have two sets of mounts actually... these ones are the lower mileage ones

How much are you willing to let them go for? I'm just looking for a cheap set that I can make into urethane bushings.


This post has been edited by barterj: Nov 9, 2009 - 1:02 AM

[pittfirefighter]

101k.... no tears or stress marks on the mounts... i have two sets of mounts actually... these ones are the lower mileage ones

How much are you willing to let them go for? I'm just looking for a cheap set that I can make into urethane bushings.

i have about 8 different people interested in them so i probably will not be selling them cheap at all... just buy the urethane inserts... they work great

[96stgreendemon]

The tinted gas door and chrome gas cap on your black gt

[pittfirefighter]

The tinted gas door and chrome gas cap on your black gt

i don't have either of those, never did

[phantom]

PMd

[solidxsnake]

Hey man, do you have the hood lock with 3 bolts? Mine is rusted shut and I can't close my hood without strenuous effort. PM coming your way.

[pittfirefighter]

hood lock sent, first post edited

BUMP!

[solidxsnake]

Got it, leaving feedback in a sec. Thanks!

[philzy]

hood lock sent, first post edited

BUMP!

I would like to buy front bumper crash bar and strofoam also hood and right low beam headlight
thaks phil danella1@verizon.net

p.s. i live pa. and can probably pick part up.

[cjh4l22]

how about an update...?

[captb]

do any of the radio pocket things have a cover, or are they the open type? i may be interested.

also, any chance one of them is a coupe?

This post has been edited by captb: Nov 17, 2009 - 2:03 AM

[pittfirefighter]

both hatchbacks, only one pocket left and its the open type...

cjh... i have your parts... i need an offer on them, we still haven't talked $$$

no crash bar or styrofoam, bumper is nasty looking (bad), headlights i have all have broken tabs but good glass (which means they work), and i do have a white hood in just about perfect condition

[SkaBass1]

do you have right and left front fender liners? how much would shipping be to 10463?

[cjh4l22]

i've sent you 2PM's for a final list of parts and price. did you not get them?

[pittfirefighter]

Bump bump

[RocketScott]

I need the top caps for the front springs. Not sure if you'd be willing to pull the struts apart and sell me just those caps.

Part number 48471-20060 in this pic:

[pittfirefighter]

I need the top caps for the front springs. Not sure if you'd be willing to pull the struts apart and sell me just those caps.

would rather not... pretty sure the caps are pretty beat too on both the celicas... they look like originals... BUMP!

[nik]

i need the following shipped to 83815

the rubber spacer at the bottom of the radiator

2 turn signal blinker pigtails

manual window crank handle

[pyeatts]

Don't suppose you have an OEM manual leather shift knob

[Akimbo]

you got a transaxle?

[pittfirefighter]

you got a transaxle?

for which tranny? i have a driver side manual axle, and a pass and driver side auto axle

Don't suppose you have an OEM manual leather shift knob

i have at least one stock manual shift knob... i don't think it has any leather though

i need the following shipped to 83815

the rubber spacer at the bottom of the radiator

2 turn signal blinker pigtails

manual window crank handle

i have everything but the crank handle... PM me an offer

[ETNRIDER]

Do you still have the bracket + hardware that hold the battery down?

Thanks

[pittfirefighter]

Do you still have the bracket + hardware that hold the battery down?

Thanks

yes... pm me with an offer

[Fate]

update?

[pittfirefighter]

update?

PM and tracking number sent

BUMP!

[j0ch0a94ST]

ok guys heres the big things right now that i have... two full GT's parting out!
ask for any other parts... lots available... as of right now, NO front end body parts available...
NO FENDERS, NO BUMPERS, NO HEADLIGHTS - DO NOT EVEN ASK.

(2) drum to disc conversions available... this is the full setup, rotors, pads, calipers, hoses, front and back, ebrake hardware, porp valve. - $300 + shipping

(1) full airbag setup (w/o ECU)... pass airbag, driver 4 post wheel w/ airbag, both sensors, clips for pass airbag - $150 + shipping

(1) recently rebuilt 99 5sfe head, great cams, ZERO miles since rebuild, still in plastic bag - $600 + shipping

(1) set of 5sfe cams - good condition - $150 + shipping

(1) 5sfe manual s54 tranny, just under 100k miles, from a 99 GT - came off running great w/ good clutch - $400 + shipping

(1) 5sfe automatic tranny, 87k miles, from a 97 GT, came off running and shifting smooth - $400 + shipping

(1) postfacelift spoiler (white) - 3 post - OBO

(1) set stock chrome rims w/ good tires - offer (only two pictured)


(1) CAI ready for GT... custom cut ready for install... w/ or w/o K&N filter - offer




any other parts you need let me know!







all parts are first come first serve... ALL PARTS ARE OBO

DO NOT POST IN THIS THREAD ABOUT CC UNITS - PLEASE PM ME ABOUT THEM OR EMAIL ME... it gets too cluttered and i hate sorting through the posts

I need at least 3 working struts for my ST will your's fit and if so how much shipped to 27606?? thanks

[pittfirefighter]

yes they will... i will sell you a set of four stock with springs... PM me an offer

[j0ch0a94ST]

yes they will... i will sell you a set of four stock with springs... PM me an offer

PM sent. Thanks

This post has been edited by j0ch0a94ST: Dec 7, 2009 - 11:36 PM

[97GTinKC]

Looking for a gas cap door, preferably in silver?

[pittfirefighter]

Looking for a gas cap door, preferably in silver?

both already sold , sorry

[pittfirefighter]

BUMP! guys make offers on anything... there are some great christmas gifts here

[Ted95]

is there any sideskirts on the celis that u would b willin to sell?

[pittfirefighter]

is there any sideskirts on the celis that u would b willin to sell?

nope sorry, i have one pair of boomers and i spent 3 years looking for them, oh and got scammed for $200 on here during the search... yeah that sucked

[CPleasure]

Id like one of the shells

[pittfirefighter]

you can have a shell for free... pick it up and its all yours

[j0ch0a94ST]

you can have a shell for free... pick it up and its all yours

Did you get my pm? How much would you want for just the rear one's shipped to 27606? thanks

you can have a shell for free... pick it up and its all yours

Did you get my pm? How much would you want for just the rear one's shipped to 27606? thanks

[cjh4l22]

Hey man a few things changed. Found entire gt4 mounts & brackets.
I need,
GT gear selector assembly (on tranny, not interior)
& GT throttle cable
shipped to 45248.

[samir0189]

do you have the airbag harness, the whole thing, driver side airbag sensor, radiator fan shroud, rad fan, and rad fan motor (all drivers side)? The piece of the wiring harness that continues after the fan plugs in? Battery tray? lmk asap.

and engine under shield for the transmission side.

And the coolant reservoir bottle, cap for that bottle.

Also if you have the other side shroud, fan, and motor i would take that also.

I can take pics of where the harness is burnt up to so you could cut from that area for me.

http://www.6gc.net/forums/index.php?showtopic=71069

This post has been edited by samir0189: Dec 10, 2009 - 7:14 PM

[pittfirefighter]

BUMP!

[pittfirefighter]

BUMP! first post updated!

[ETNRIDER]

Got my parts!!! This is a great seller, honest and fast!!

THANK YOU!!!

[NewOrleans]

tweeter with covers?

[pittfirefighter]

have two sets. $50 shipped for the pair of tweets w/ covers and pigtails

[pittfirefighter]

BUMP! first post updated!

[pittfirefighter]

BUMP... plenty of parts still for sale!!