![]() |
![]() ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 25, '06 From Hong Kong Currently Offline Reputation: 256 (100%) ![]() |
Check out the pics, due to some technical issue, the 2 "HALF MOON" Vent don't have screws underneath, but simply stick on it with whatever reliable glues or double side adhersive tape is fine, since those are light in weight.
Not cover, direct replacement, need to remove your stocked one. Robby test fit already and don't have problem so far. ![]() ![]() USD$150 for all 3 vents, shipping should be around usd$20 more or less for all 3. 6 Colors to choose from Most popular would be: Black CF Silver Kevlar Yellow Black Red Black Blue Black Mat Black Eurou Raiser Blocks ![]() ![]() ![]() ![]() FG USD$100 + Shipping CF/Kevlar USD$160 + Shipping This post has been edited by vincent_doggy: May 14, 2010 - 10:41 PM -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Sep 17, '05 From Newcastle / UK Currently Offline Reputation: 4 (100%) ![]() |
Put me down for the bonnet vents in black CF shipped to the UK
![]() Just need the full posted price and your paypal Vince This post has been edited by Driveby: Oct 29, 2009 - 11:03 AM -------------------- 1994 JDM GT4 WRC
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 25, '06 From Hong Kong Currently Offline Reputation: 256 (100%) ![]() |
Anyone?
-------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Mar 22, '07 From Murphy, TX Currently Offline Reputation: 5 (100%) ![]() |
The half moon cannot be screwed down? Thats a bit scary even if to use glue. That would be on my mind every time I drive worrying if its gonna fly off. I'm in Texas so when the summer time comes, it is hot and glue would not do.
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Sep 17, '05 From Newcastle / UK Currently Offline Reputation: 4 (100%) ![]() |
Ill be using epoxy and some ground down bolts to attach mine with, theres always a way if you put your mind to it.
-------------------- 1994 JDM GT4 WRC
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 25, '06 From Hong Kong Currently Offline Reputation: 256 (100%) ![]() |
The half moon cannot be screwed down? Thats a bit scary even if to use glue. That would be on my mind every time I drive worrying if its gonna fly off. I'm in Texas so when the summer time comes, it is hot and glue would not do. Dude, I understand what u are worry of... your SUN is hotter than ours... 1. But I think once u drive forward, normally the air flow would go from front to rear... kinda like headwind all the time, so the vent would click well, thats my assumption 2. Use some silicone glue or anything that is more heavy duty, the windshield glass are also using silicone glue to stick on, i doubt that would fly off thou... This post has been edited by vincent_doggy: Oct 31, 2009 - 12:07 PM -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Sep 17, '05 From Newcastle / UK Currently Offline Reputation: 4 (100%) ![]() |
I cant belive there isnt more interest on these?????? What is putting people off? fixing method? price?
-------------------- 1994 JDM GT4 WRC
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() Joined Dec 14, '06 From MN, USA Currently Offline Reputation: 2 (100%) ![]() |
I'm too poor to get the gt4 hood. Lol
|
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 30, '02 From San Juan, PR Currently Offline Reputation: 4 (100%) ![]() |
Euro raiser blocks will be mine finally, buahaha.
-------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined May 4, '09 From coral springs florida US Currently Offline Reputation: 21 (100%) ![]() |
Check out the pics, due to some technical issue, the 2 "HALF MOON" Vent don't have screws underneath, but simply stick on it with whatever reliable glues or double side adhersive tape is fine, since those are light in weight. Not cover, direct replacement, need to remove your stocked one. Robby test fit already and don't have problem so far. ![]() ![]() USD$150 for all 3 vents, shipping should be around usd$20 more or less for all 3. 6 Colors to choose from Most popular would be: Black CF Silver Kevlar Yellow Black Red Black Blue Black Mat Black Eurou Raiser Blocks ![]() ![]() ![]() ![]() FG USD$100 + Shipping CF/Kevlar USD$160 + Shipping im sorry to ask this that has nothing to do with ur ad but what type of rear lip is that?? the one on the black celi?? -------------------- ![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 25, '06 From Hong Kong Currently Offline Reputation: 256 (100%) ![]() |
Check out the pics, due to some technical issue, the 2 "HALF MOON" Vent don't have screws underneath, but simply stick on it with whatever reliable glues or double side adhersive tape is fine, since those are light in weight. Not cover, direct replacement, need to remove your stocked one. Robby test fit already and don't have problem so far. ![]() ![]() USD$150 for all 3 vents, shipping should be around usd$20 more or less for all 3. 6 Colors to choose from Most popular would be: Black CF Silver Kevlar Yellow Black Red Black Blue Black Mat Black Eurou Raiser Blocks ![]() ![]() ![]() ![]() FG USD$100 + Shipping CF/Kevlar USD$160 + Shipping im sorry to ask this that has nothing to do with ur ad but what type of rear lip is that?? the one on the black celi?? 404 I believe, its a very common one -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Sep 17, '05 From Newcastle / UK Currently Offline Reputation: 4 (100%) ![]() |
Do we need a list then?
Carbon Vents 1. Driveby - Black CF This post has been edited by Driveby: Nov 10, 2009 - 1:18 PM -------------------- 1994 JDM GT4 WRC
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Oct 29, '04 From Hong Kong Currently Offline Reputation: 5 (100%) ![]() |
Do we need a list then? Carbon Vents 1. Driveby - Black CF 2. Robby - Black CF -------------------- ![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Jul 2, '08 From SoCal Currently Offline Reputation: 6 (100%) ![]() |
you have any half moon vents with defects that i could pick up at a discounted rate? i don't care what they look like since they'll be going on my rallyx car.
|
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 30, '02 From San Juan, PR Currently Offline Reputation: 4 (100%) ![]() |
Eurou Raiser Blocks:
1) OOBE - CF -------------------- |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 30, '02 From San Juan, PR Currently Offline Reputation: 4 (100%) ![]() |
Nobody else wants in? Come on, guys.
![]() -------------------- |
![]() |
|
![]() Enthusiast ![]() Joined Sep 6, '08 From Burlington Currently Offline Reputation: 0 (0%) ![]() |
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Nov 30, '04 From Atlantic City Currently Offline Reputation: 21 (100%) ![]() |
Eurou Raiser Blocks: 1) OOBE - CF 2) CelicaGTSboy23 - CF 3) Fate - Debating CF vs FG -------------------- |
![]() |
|
![]() Enthusiast ![]() Joined Dec 12, '09 From N.Ireland Currently Offline Reputation: 0 (0%) ![]() |
Is this still ongoing? I would be interested in the Eurou Blocks in FG, how much would the shipping be to the UK?
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 25, '06 From Hong Kong Currently Offline Reputation: 256 (100%) ![]() |
Is this still ongoing? I would be interested in the Eurou Blocks in FG, how much would the shipping be to the UK? USD$140 SHIPPED -------------------- |
![]() |
|
![]() Enthusiast ![]() Joined Dec 12, '09 From N.Ireland Currently Offline Reputation: 0 (0%) ![]() |
Eurou Raiser Blocks:
1) OOBE - CF 2) CelicaGTSboy23 - CF 3) Fate - Debating CF vs FG 4) smirnoff - FG |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 30, '02 From San Juan, PR Currently Offline Reputation: 4 (100%) ![]() |
Eurou Raiser Blocks:
1) OOBE - CF 2) CelicaGTSboy23 - CF 3) Fate - Debating CF vs FG 4) smirnoff - FG Hood Vents: 1) OOBE - Black CF Come on, guys...let's do this! This post has been edited by OOBE: Dec 30, 2009 - 12:57 AM -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Sep 17, '05 From Newcastle / UK Currently Offline Reputation: 4 (100%) ![]() |
Thanks to Vincent I now have my CF bonnet vents
![]() I know a few people were worried that the rear vents had no fixings fitted and were dubious of using sticky tape / glue to secure them so heres a quick how to for a more oem fitting. You will need; Suitable long enough bolts with nuts and washers, a spanner or ratchet and socket combo to remove the old vents and secure the new ones. A suitable two pack epoxy or glue combo. Id say it would have to be a two pack variety as they cure quicker and are generally much more secure than standard type glues. I used JB Quick Weld as I cant rate this stuff highly enough. Remove the standard vents by loosening the nuts that secure them. ![]() Next place the new vent onto the bonnet (yeah you call it a hood ![]() ![]() With the vent in place, raise the bonnet, and through the oem fixing holes mark the underside of the new vent. The hole is quite small, I used a welding rod to scratch the underside. It doesnt have to be exact as this is only a guide for where we're going to put our first blob of two pack adhesive. Remove the vent, now put your new bolts through the fixing holes in the bonnet from the top, down over. Next mix a little two pack adhesive and put a small blob - enough for the head of the bolt to squash into, it doesnt need to be any bigger at this stage - on each of the two marks that you made earlier on the back of your vent, do the vents one at a time due to the curing time of the adhesive. Next carefully refit the vent to the bonnet being very careful of the adhesive on the back, at this point tape the vent down to stop it moving around as the adhesive is still quite pliable. With the vent in place, open bonnet and push the bolts gently up into the adhesive, twist them gently back and fort to seat them securely. Most two pack adhesives cure pretty quick - about 15 minutes depending on temperatureand quantity with full hardness in a couple of hours. At this point you have two choices, let the small blob cure fully or if your confident of your skills and steady hand, removed the vent very carefully after about 10 minutes making sure you dont move or misalign the bolts. If you misalign them at this stage your vents wont line up and will look crap. Once the vents are removed, mix up a bigger quantity of adhesive and apply around the head of the bolt to secure it fully. Dont refit the vent until the glue has cured completely or youll risk pulling the bolt out when you tighten the nuts. ![]() Once fully cured you can fit your vents and secure them with the nuts and washers, take care when tightening the nuts and dont over tighten them. ![]() The snorkel vent comes with fixings already fitted so is just a straight swap out. ![]() ![]() Pretty straight forward job to do, should only take an hour to do depending on the speed that your glue cures and how brave you are. Id advise the final cure is left over night so as not to risk pulling the bolts out. -------------------- 1994 JDM GT4 WRC
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 30, '02 From San Juan, PR Currently Offline Reputation: 4 (100%) ![]() |
You have one of the sexiest GT-4s and now it has become even more sexier.
![]() -------------------- |
![]() |
|
Enthusiast ![]() Joined Mar 10, '08 From Ct Currently Offline Reputation: 0 (0%) ![]() |
what is does the FG mean for the raiser blocks?
This post has been edited by 6gcnoob: Jan 1, 2010 - 3:50 PM |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 30, '02 From San Juan, PR Currently Offline Reputation: 4 (100%) ![]() |
FG means the raiser blocks are made of fiberglass instead of carbon fiber.
-------------------- |
![]() |
|
Enthusiast ![]() Joined Mar 10, '08 From Ct Currently Offline Reputation: 0 (0%) ![]() |
how much shipped to 06331?
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 25, '06 From Hong Kong Currently Offline Reputation: 256 (100%) ![]() |
how much shipped to 06331? FG USD$100 + Shipping CF/Kevlar USD$160 + Shipping shipping is about usd$35 -------------------- |
![]() |
|
![]() Enthusiast ![]() Joined Oct 29, '04 From Hong Kong Currently Offline Reputation: 5 (100%) ![]() |
Thanks to Vincent I now have my CF bonnet vents ![]() I know a few people were worried that the rear vents had no fixings fitted and were dubious of using sticky tape / glue to secure them so heres a quick how to for a more oem fitting. You will need; Suitable long enough bolts with nuts and washers, a spanner or ratchet and socket combo to remove the old vents and secure the new ones. A suitable two pack epoxy or glue combo. Id say it would have to be a two pack variety as they cure quicker and are generally much more secure than standard type glues. I used JB Quick Weld as I cant rate this stuff highly enough. Remove the standard vents by loosening the nuts that secure them. ![]() Next place the new vent onto the bonnet (yeah you call it a hood ![]() ![]() With the vent in place, raise the bonnet, and through the oem fixing holes mark the underside of the new vent. The hole is quite small, I used a welding rod to scratch the underside. It doesnt have to be exact as this is only a guide for where we're going to put our first blob of two pack adhesive. Remove the vent, now put your new bolts through the fixing holes in the bonnet from the top, down over. Next mix a little two pack adhesive and put a small blob - enough for the head of the bolt to squash into, it doesnt need to be any bigger at this stage - on each of the two marks that you made earlier on the back of your vent, do the vents one at a time due to the curing time of the adhesive. Next carefully refit the vent to the bonnet being very careful of the adhesive on the back, at this point tape the vent down to stop it moving around as the adhesive is still quite pliable. With the vent in place, open bonnet and push the bolts gently up into the adhesive, twist them gently back and fort to seat them securely. Most two pack adhesives cure pretty quick - about 15 minutes depending on temperatureand quantity with full hardness in a couple of hours. At this point you have two choices, let the small blob cure fully or if your confident of your skills and steady hand, removed the vent very carefully after about 10 minutes making sure you dont move or misalign the bolts. If you misalign them at this stage your vents wont line up and will look crap. Once the vents are removed, mix up a bigger quantity of adhesive and apply around the head of the bolt to secure it fully. Dont refit the vent until the glue has cured completely or youll risk pulling the bolt out when you tighten the nuts. ![]() Once fully cured you can fit your vents and secure them with the nuts and washers, take care when tightening the nuts and dont over tighten them. ![]() The snorkel vent comes with fixings already fitted so is just a straight swap out. ![]() ![]() Pretty straight forward job to do, should only take an hour to do depending on the speed that your glue cures and how brave you are. Id advise the final cure is left over night so as not to risk pulling the bolts out. very good job......and professional to fix up .. I need follow you. hehe -------------------- ![]() |
![]() |
|
Enthusiast ![]() Joined Mar 10, '08 From Ct Currently Offline Reputation: 0 (0%) ![]() |
|
![]() |
|
![]() Enthusiast ![]() ![]() Joined Aug 19, '09 From Sydney Currently Offline Reputation: 0 (0%) ![]() |
I'd buy the raiser blocks, but I need a 2-post spoiler.
![]() -------------------- ![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 25, '06 From Hong Kong Currently Offline Reputation: 256 (100%) ![]() |
Placed order already!!
Pls ready for your payment!! -------------------- |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 30, '02 From San Juan, PR Currently Offline Reputation: 4 (100%) ![]() |
Woo-hoo!
![]() -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Nov 30, '04 From Atlantic City Currently Offline Reputation: 21 (100%) ![]() |
so the euro blocks are ready for payment?
-------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 25, '06 From Hong Kong Currently Offline Reputation: 256 (100%) ![]() |
so the euro blocks are ready for payment? Yes, pls make up your mind on CF vs FG -------------------- |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 30, '02 From San Juan, PR Currently Offline Reputation: 4 (100%) ![]() |
Can you save me my raisers and hood vents until the 31st of January, which is when I get paid? I spent all my money on an engine and tranny.
![]() ![]() -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 25, '06 From Hong Kong Currently Offline Reputation: 256 (100%) ![]() |
Can you save me my raisers and hood vents until the 31st of January, which is when I get paid? I spent all my money on an engine and tranny. ![]() ![]() yea, ok -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Nov 30, '04 From Atlantic City Currently Offline Reputation: 21 (100%) ![]() |
FG.
-------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Sep 17, '05 From Newcastle / UK Currently Offline Reputation: 4 (100%) ![]() |
The quality of these vents is superb and they look great once fitted.
You wont be dissapointed when you get them! -------------------- 1994 JDM GT4 WRC
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Dec 12, '09 From N.Ireland Currently Offline Reputation: 0 (0%) ![]() |
Vincent I'm delighted these eurou raisers are now available will pay you next week as soon as I get paid, jeez I hate january get paid before xmas then wait 6 weeks to get paid again.
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 25, '06 From Hong Kong Currently Offline Reputation: 256 (100%) ![]() |
![]() ![]() ![]() ![]() -------------------- |
![]() |
|
![]() Enthusiast ![]() Joined Dec 12, '09 From N.Ireland Currently Offline Reputation: 0 (0%) ![]() |
Payment sent Vincent for the Eurou Raiser blocks, check your PM
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 25, '06 From Hong Kong Currently Offline Reputation: 256 (100%) ![]() |
Payment sent Vincent for the Eurou Raiser blocks, check your PM Sent! Check PM for tracking no. -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Feb 16, '07 From BP, MN Currently Offline Reputation: 7 (100%) ![]() |
What's the inventory count for the euro raiser blocks?
-------------------- ![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 25, '06 From Hong Kong Currently Offline Reputation: 256 (100%) ![]() |
What's the inventory count for the euro raiser blocks? 3 sets of Fiber Glass 2 sets of Carbon Fiber -------------------- |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 30, '02 From San Juan, PR Currently Offline Reputation: 4 (100%) ![]() |
I ran out of money, bro, but I get paid this week. Just letting you know. I know I said February but unpanned expenses took place.
-------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 25, '06 From Hong Kong Currently Offline Reputation: 256 (100%) ![]() |
-------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Nov 15, '08 From Merced, CA Currently Offline Reputation: 3 (100%) ![]() |
Any more Euro raiser blocks available?
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 25, '06 From Hong Kong Currently Offline Reputation: 256 (100%) ![]() |
Any more Euro raiser blocks available? I only have a pair of CF Eurou Blocks in stock. If FG need to wait for next batch!! -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Nov 15, '08 From Merced, CA Currently Offline Reputation: 3 (100%) ![]() |
I just want the fiberglass ones since I'm going to paint them anyway. When's the next batch going to be ready?
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 25, '06 From Hong Kong Currently Offline Reputation: 256 (100%) ![]() |
I just want the fiberglass ones since I'm going to paint them anyway. When's the next batch going to be ready? Might place an order with other stuffs from the supplier end of April, could make a pair for ya if u want Vince -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Nov 15, '08 From Merced, CA Currently Offline Reputation: 3 (100%) ![]() |
I just want the fiberglass ones since I'm going to paint them anyway. When's the next batch going to be ready? Might place an order with other stuffs from the supplier end of April, could make a pair for ya if u want Vince Yeah I want a pair. When do you want me to send payment? Shipping is to 95340 USA |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 30, '02 From San Juan, PR Currently Offline Reputation: 4 (100%) ![]() |
I received my raisers and vents last week, Vince. They look good other than a few blemishes under the clear. I was kind of dissapointed at that since the hood spoiler was perfect. I expected the other items to be perfect too. The finish wasn't as refined, but they'll do. You can't see it unless you look at them from a foot away.
-------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 25, '06 From Hong Kong Currently Offline Reputation: 256 (100%) ![]() |
Eurou Raiser Blocks
1 Pair of Fiber Glass and 1 pair of Carbon Fiber in stock!! -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined May 4, '09 From coral springs florida US Currently Offline Reputation: 21 (100%) ![]() |
[/quote]
i want the euro raiser blocks.. how much shipped to 33065? not carbon fiber regular ones -------------------- ![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 25, '06 From Hong Kong Currently Offline Reputation: 256 (100%) ![]() |
i want the euro raiser blocks.. how much shipped to 33065? not carbon fiber regular ones USD$140 shipped -------------------- |
![]() |
|
Enthusiast ![]() Joined Mar 16, '10 From UNITED KINGDOM Currently Offline Reputation: 0 (0%) ![]() |
hi can i have a price for the CF bonnet vents shipped the UK?
thanks dave |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 25, '06 From Hong Kong Currently Offline Reputation: 256 (100%) ![]() |
hi can i have a price for the CF bonnet vents shipped the UK? thanks dave 6GC price USD$150 (eShop@$160 http://www.kamikaze.com.hk/product.php?id_product=10) + usd$25 Make to order! Vince -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: August 19th, 2025 - 10:10 AM |