TRDPROVEN's PICS THREAD, Updated as of 4/1/2011 Options

[trdproven]

This is my pics compilation, more to come.

Parts List:
Performance
==========================
(Auto-Manual Transmission Conversion)
- Competition ST185 3sgte Lightweight Flywheel
- Competition 3sgte Pressure Plate
- Competion 3sgte Stage 1 Clutch Disk / 5sfe hub Gravity Series 2400
- ARP Flywheel Bolts
==========================
- Surewin 4-1 Stainless Headers
- Custom 2.25" Downpipe and w/o Cat
- Greddy SP2 Catback Exhaust
- 3" Weapon R Intake Pipe w/ APEXi Power Intake 80mm Filter/Flange
- 2 Silicone Couplers and T-Bolt Clamps
- Magnecor 8.5mm Competition Wires
- Denso Iridium Spark Plugs
- Royal Purple Synthetic Performance Oil
- TRD High Pressure Radiator Cap
- TRD Black Chrome Oil Cap
- Toyota OEM Genuine Oil Filter
- Optima Red Top Dry Cell Battery
- Aluminum Radiator Cooling Plate
- SokieTech Hood Damper
- PIAA Sport Horns
- Password JDM Washer/Bolts
==========================
- Polished Valve Cover (Reserve)
- Gozigen Full Catback Exhaust 2.5" (Reserve)
- Weapon R Air Filter (Reserve)
- TRD Shift Knob (Reserve)
- INJEN Intake Piping (Sold)
- FUJITA High Flow Air Filter (Sold)
- INJEN High Flow Air Filter w/ heat shield (Sold)
- TRD Drop in filter (Sold)
==========================

Suspension
==========================
- Megan 32 Way Fully Adjustable Coilover Suspension
- EZ Cam Camber Kit
- JDM Toyota OEM Front Strut Bar
- 17" Bronze Work Emotion XD9
- Nitto 555 225/40 ZR Tires
- D1 SPEC Lug Nuts (Blue)
- 7th Gen. GT Wheels (2 Sets)
- 7th Gen GTS Wheels
- 6th Gen. GT Alloy Wheels
==========================
- KYB Struts/Shocks (Reserve)
- 17" Gun-Metal Enkei Wheels (Reserve)
- Nankang NS-II 205/40 Tires (Reserve)
- Intrax Suspension Springs (Sold)
- TRD Sport Springs (Sold)
==========================

Exterior
==========================
- Paint: Code 740 (PPG Global Black) w. Black Clear
- JDM Toyota OEM Projectors
- JDM Toyota OEM SS-III Front Bumper Conversion
- JDM Toyota OEM SS-III Grill
- JDM Toyota OEM 96-99 Fog Lamps
- JDM Toyota OEM SS-III Wing Badge (2 Sets)
- JDM Toyota OEM 96-99 Taillights
- JDM Toyota OEM Toms Front Lip
- JDM Toyota OEM SS-III Side Skirts
- JDM Toyota OEM SS-III Rear Splitters
- JDM Toyota OEM Window Visors
- JDM Toyota OEM Side Markers
- JDM Toyota OEM Beams Decal
- JDM Toyota OEM SS-III Wing Badges
- JDM Tilt License Plate Holder
- TRD License Plate Frames (2 Sets)
- Dark Smoke Tint
- JDM Toyota OEM SS-III Front Splitters (Sold)
==========================
- H.I.D. Kit 8000K (H1 Lows Conversion)
- H.I.D. Kit 8000K H3 Fogs
- White 4 L.E.D. Accent Light Bulbs
- White 4 L.E.D. License Plate Bulbs
- Superwhite Backup Lamp Bulbs
==========================
- Polished Factory GT Exhaust (Reserve)
- Kobo Super White Bulbs 9006 (Reserve)
- Xenon White Bulbs H3 (Reserve)
- Nokya Arctic White Bulbs (9006) (Reserve)
- Nokya Hyper Yellows (H3) (Reserve)
- Nokya Arctic Whites (H3) (Reserve)
- JDM Toyota OEM 94-95 Fog Lights (Reserve)
- 2x 94-95 OEM Front Bumpers (Spares)
- 94-95 OEM Parking Lights (Spare)
- 94-95 OEM Side Markers (Spare)
- H.I.D. Kit 8000K 9006 Lows (Reserve)
- JDM Toyota OEM Euro Front Splitters (Sold)
==========================

==========================
- JDM Toyota OEM Rare Red Stitched 3 Spoke Steering Wheel
- JDM Toyota OEM Rare Red Stitched Shift Knob
- Leather Red Stitched Short Shift Boot
- 7th Gen Celica Titanium Short Shifter
- TRD Leather Shift Knob (Reserve)
==========================
- JVC MP3/WMA Head Unit
- 2.0 Farad Massive Audio Capacitor
- 140 amp Circuit Breaker
- Gold Terminal Connectors
- 2x6.5" JBL 2-way speakers
- 2x6.5" Blaupunkt 2-Way
- 2x1" SPL 97DB Tweeters
- Precision Power 2000watt Subwoofer
- Power Acoustik 1250watt Amplifier
- Power Acoustik 97DB Tweeters
- Crossfire Amplifier for Mids & Highs
- Custom Mount Platform for Amp, Cap
==========================
(Full Interior LED Conversion)
- Red L.E.D. Gauge Cluster w/ OEM custom red needles
- Red LED OEM Climate Control Unit
- Red L.E.D. Key Ring Light
- White 5 L.E.D. BA9 Map Light Bulbs
- White L.E.D. Glove Light
- White L.E.D. Coin Holder Light
- White 16 L.E.D. Cargo Light
- Amber OEM Fog Switch
- Amber Clock
==========================
- 4 Spoke Leather Steering Wheel (Reserve)
- Ported Bandpass Box (Reserve)
- 2x12" W1V1 JL Subs (Reserve
- 2x1" Infiniti Reference Tweeters (Reserve)
- 2x8" Kicker Midsubs (Reserve)
- 12" JL Audio W3V3 Series Subwoofer (Reserve)
- JL Audio Mono Amplifier for Subwoofer (Reserve)
==========================


EXTERIOR:





INTERIOR:







ENGINE BAY:



This post has been edited by trdproven: Jun 14, 2011 - 12:20 AM

[Shigexile]

looking good with the red accent color

[BonzaiCelica]

finally got your intake set-up 3 inch piping Im guessing? very nice!

[trdproven]

Yea I did, was actually the best intake Ive had after trying 4 different kinds. I recommend these Japanese Apexi intake set ups.

[azn87]

how about that on a injen pipe?

[trdproven]

Used to have one on, not much of a fan for Injen Intakes.

[HectortheRican]

How much did the apexi kit run you? I'm perfectly happy with the Injen pipe you sold me but like you, I'll more than likely want to upgrade eventually, and you seem to be quite happy with that set up.

[trdproven]

Some old and some New Updated Pics.

This post has been edited by trdproven: Jan 15, 2011 - 4:51 AM

[BonzaiCelica]

I like how you painted your needles red. How do you paint the needles bright orange color like the ones from the Beams Cluster gauge and SX-R cluster gauge as well???

[trdproven]

I like how you painted your needles red. How do you paint the needles bright orange color like the ones from the Beams Cluster gauge and SX-R cluster gauge as well???

Krylon sells a plastic paint that requires no prepping, just paints straight on.

[HectortheRican]

I like how you painted your needles red. How do you paint the needles bright orange color like the ones from the Beams Cluster gauge and SX-R cluster gauge as well???

Krylon sells a plastic paint that requires no prepping, just paints straight on.

Could we get that at any automotive store?

[trdproven]

i just got it at kmart, surprisingly we have the largest kmart in the world. But you should be able to get it at any place that sells a variety of spray paints.

This post has been edited by trdproven: Jan 15, 2011 - 4:11 PM

[EKAn]

A 3sgte flywheel fits on a 5sfe?

[trdproven]

yea thats why I am using the ARP flywheel bolts cus you can't use the stock bolts. 3sgte clutch disc > 5sfe diameter clutch and flywheel. It would be off to run a bigger 3sgte clutch on a smaller 5sfe flywheel, it has to match, but it could work the other way around if the clutch was smaller than the flywheel you would just eat into the flywheel with a smaller diameter. hybrid clutch systems exists within many cars. its just all mix and match between the two motors parts what fits, what doesn't, modifying the difference, etc.

Are you thinking about this as a new idea for a new setup?

This post has been edited by trdproven: Jan 15, 2011 - 5:50 PM

[azn87]

is there any advantages of running a 3s flywheel compared to a 5s?

[cyberblader1130]

is there any advantages of running a 3s flywheel compared to a 5s?

Second that, i'm looking to buy a new clutch, and flywheel.

[trdproven]

bigger diameter more overal diameter for improved grab, plus more aftermarket options with 3sgte clutch parts.

This post has been edited by trdproven: Jan 15, 2011 - 9:22 PM

[Mycurse180]

Very sexy car. WELL DONE!

[azn87]

I don't know much about flywheel and cluth but is it a direct fit?? And what clutch kit did u get

[trdproven]

I don't know much about flywheel and cluth but is it a direct fit?? And what clutch kit did u get

flywheel 3sgte - just needs ARP bolts
clutch disc - 3sgte pressure plate, 3sgte clutch disc with 5sfe hub. (you can ask the company to make the hub match for the spline)

I'm using Competion Clutch brand. You can get them directly from Tweak if you don't want to deal with the vendor or company.

This post has been edited by trdproven: Jan 16, 2011 - 10:13 AM

[EKAn]

yea thats why I am using the ARP flywheel bolts cus you can't use the stock bolts. 3sgte clutch disc > 5sfe diameter clutch and flywheel. It would be off to run a bigger 3sgte clutch on a smaller 5sfe flywheel, it has to match, but it could work the other way around if the clutch was smaller than the flywheel you would just eat into the flywheel with a smaller diameter. hybrid clutch systems exists within many cars. its just all mix and match between the two motors parts what fits, what doesn't, modifying the difference, etc.

Are you thinking about this as a new idea for a new setup?

My clutch will probably need to be replaced soon as well as my flywheel so this would be an option

[trdproven]

This post has been edited by trdproven: Feb 3, 2011 - 1:37 AM

[jordisonjr]

Damn this is probably one of the cleanest cars on this site.
SO sick

[trdproven]

I'm just compiling pics for my thread.

[JDUB]

bigger pics plz! doope ride though

[trdproven]

This post has been edited by trdproven: Mar 31, 2011 - 7:54 PM

[KALLusion]

looks awesome man. super clean, everything looks well planned out. Love the detail.

[malpaso]

On my opinion evolution of design of your car goes the right way . That black looks the best.

[trdproven]

thanks Martin, i try to keep it legit, OEM styling, and most of all simple and clean.

This post has been edited by trdproven: Mar 15, 2011 - 4:32 AM

[satelite]

very clean and beatifull car, congrats.
Super shine

[Shigexile]

loved how your car looks back then
love it how it looks now.

I'm in japan often, I should come pay you a visit.

[mak5603]

love how your car looked back then.
love it how it looks now.

No joke, EXACTLY what I was going to say...

[trdproven]

New PIAA Sport Horns and Password JDM Bolt/Washers for upper bumper retainer. Horn sounds like a bus. lol





This post has been edited by trdproven: Mar 20, 2011 - 5:15 PM

[trdproven]

loved how your car looks back then
love it how it looks now.

I'm in japan often, I should come pay you a visit.

That would be awesome, I should be there as well in the summer to host some friends - show them around.

[trdproven]

Exhaust Setups.

Previous 5zigen Border (Jasma) Edition Catback.



Current Greddy SP2 Catback



This post has been edited by trdproven: Apr 24, 2011 - 5:55 AM

[trdproven]

Check it out all three of my celicas =P

[trdproven]

Rear pic with 5zigen Catback.



This post has been edited by trdproven: Mar 31, 2011 - 10:20 PM

[JDUB]

which one sounds better and where did u get both the exaust from? thanks mate
very sexy btw

[trdproven]

i got both exhausts from members here on the forum. can't say which is better, they both have their pros. The 5zigen is much quieter, bigger canister, resonator, and piping, good if you don't want it loud and good flow. Greddy SP2 is much deeper in tone, smaller piping, smaller resonator, by going to this smaller diameter i gain back some little torque on the low end. BTW, i am running catless with a custom 2.25" downpipe.

[wadeos]

Very sexy i must say.. !!
What speakers did you replace the mid range speakers with on the premium speakers ?
Did you make a custom bracket ?

This post has been edited by wadeos: Apr 6, 2011 - 4:37 PM

[trdproven]

^ oh for the doors? I used the OEM speaker brackets and I cut out the OEM speakers I then mounted my 6.5" speakers onto this bracket. The OEM speaker bracket is 8", but not all of the 8" is the actual speaker, thats how you are able to use it as brackets.

[wadeos]

^ oh for the doors? I used the OEM speaker brackets and I cut out the OEM speakers I then mounted my 6.5" speakers onto this bracket. The OEM speaker bracket is 8", but not all of the 8" is the actual speaker, thats how you are able to use it as brackets.

Nah i mean the middle speaker. The speakers like a 4". Did you make a bracket to fit the aftermarket speaker ?

[trdproven]

oh i see, what i did was mount them to the door panel. i'm not using brackets. you can use those clips the ones that come with speakers something similar to mounting the bottom of the bumper, looks just like that.

[trebilihp]

Sexiest celica ever man...

Could you post bigger pics of your ride, like the last ones you posted, so I can use them as a wallpaper? This car is just so hot.

This post has been edited by trebilihp: Apr 23, 2011 - 12:42 PM

[trdproven]

I will, need to take new pics anyways, want to borrow my friends camera to do it though. Been working on my 7gc these days, that been neglecting the 6gc. i think the 7gc is going to come out pretty nice. I'm looking forward to taking pics of both cars together.

This post has been edited by trdproven: Apr 24, 2011 - 5:58 AM

[trebilihp]

Nice! I can't wait to see those pics man, i'm really a fan of your work. Glad to see that you have a 7th gen too, i think its also a nice car. Keep on!

This post has been edited by trebilihp: May 8, 2011 - 12:54 AM

[trdproven]

My 7th gen should be ready soon. parts i have for it so far are:

JDM Toyota OEM Side Markers Amber
JDM Toyota OEM Window Visors
Greddy Gracer Front Lip (TRD Front Bumper Soon for alternate styling)
TRD Side Skirts
TRD Rear Valence
TRD Wing Spoiler
TRD 3rd Brake Light Cover
7gc GTS Wheels (Aftermarkets coming soon or my Enkeis will go on)



This post has been edited by trdproven: May 8, 2011 - 6:33 PM

[trebilihp]

I likE the 7th gen trd front bumper alot, it kinda looks like the gt-four bumper. And altough i really like the 7th gen gt-s wheels, i think the enkei will look really good.

[BonzaiCelica]

wow the size of the 5 zigen is just way to big. I prefer the look of your greddy sp2 by a lot. The hks hi power looks better than the 5 zigen.

[trdproven]

^ the 5zigen is a bigger canister, it hangs lower, and the tip is smaller, I think if the tip was larger like the sp2 it wouldnt be too bad. the 5zigen's advantage is its quieter than the sp2.

It doesn't look too bad in this pic though.


This post has been edited by trdproven: Jun 3, 2011 - 7:29 PM