FS: Junkyard partout, 94 gt hatchback & 94 st coupe found Options

[SoDo]

I found a 94 gt in the junkyard yesterday. Just seeing if anybody needs any parts.








This post has been edited by SoDo: Jul 23, 2010 - 5:20 PM

[azn87]

For how much exhaust manifold? And maybe throttle cable

[SoDo]

Let me see how much it is there. I'm going back today to help my bro get a bumper for his chevy malibu. FYI exhaust manifold will be expensive to ship due to weight. I'll let you know asap though. Thanks

[RvA944]

I could use the pass side low beam. and does that have the rear disk brakes??? I have a AT200 over here UGH!!!!

This post has been edited by RvA944: Jun 30, 2010 - 12:37 PM

[Johnnyny]

I could use the pass side low beam. and does that have the rear disk brakes??? I have a AT200 over here UGH!!!!

its a GT so the brake assembly should be there and it looks like no abs although dats not a problem

[SoDo]

I'll check on the headlight and make sure no tabs are broken on it. I'll check out the rear brakes as well. Anyone want those mirrors? Pretty good shape.

This post has been edited by SoDo: Jun 30, 2010 - 12:41 PM

[Stambo]

get me the little clip that holds the shifter cable into the lower part of the shifter assembly. I realllyyy need it. It would be so much appreciated

[HectortheRican]

I'm interested in the rear disc assembly if RvA944 doesn't buy

[SoDo]

For how much exhaust manifold? And maybe throttle cable

Exhaust manifold is gone. I think it has the throttle cable though.

I could use the pass side low beam. and does that have the rear disk brakes??? I have a AT200 over here UGH!!!!

Passenger low beam has a crack on the housing. I'll pm you about the brakes tomorrow.

get me the little clip that holds the shifter cable into the lower part of the shifter assembly. I realllyyy need it. It would be so much appreciated

Can you show me what you're talking about?

This post has been edited by SoDo: Jun 30, 2010 - 7:05 PM

[nics]

passenger high beam

[SoDo]

Some more pics


rear springs. Not sure what brand they are but def not stock.

passenger high beam

I'll check it out tomorrow. I know that the driver high beam was totally broken. I'll let you know

[RvA944]

o nthe pass lowbeam damn....... and do let me know about the rear brakes then when ya can.

[CJOHNST3]

[quote name='SoDo' date='Jun 30, 2010 - 1:16 PM' post='862459']
I found a 94 gt in the junkyard yesterday. Just seeing if anybody needs any parts.

I'm looking for the clips that hold on the center console lid, if not broken, will pay a generous fee for those two tiny parts

[RvA944]

hey any updates on the rear brakes?????

[njccmd2002]

hey bro, completely off topic, are there any old school celicas there.

[Keiri]

Front brake calipers shipped to 28391?

Thanks.

[SoDo]

hey bro, completely off topic, are there any old school celicas there.

What year are u looking for?

Front brake calipers shipped to 28391?

Thanks.

Let me check on that next time I go there. I'll pm ya sometime next week.

hey any updates on the rear brakes?????

Havent had time yet. Hopefully sometime next week.

[SoDo]

[quote name='CJOHNST3' date='Jul 16, 2010 - 9:28 AM' post='865107']
[quote name='SoDo' date='Jun 30, 2010 - 1:16 PM' post='862459']
I found a 94 gt in the junkyard yesterday. Just seeing if anybody needs any parts.

I'm looking for the clips that hold on the center console lid, if not broken, will pay a generous fee for those two tiny parts

I think the console is gone, but I'll check next week.

[SoDo]

Update!! Car is still available for parts, but car will prob be scrapped in a few weeks. Someone took the 2 point spoiler and the back springs are gone.

CJOHNST3: Sorry the center console is gone. I'll let you know if I find another 6gc and if I can help you out.

njccmd2002: The oldest I saw was a 4th gen today. They put new cars in there every week, so ill let you know if I find anything or pm for what your looking for exactly.

RvA944: Pm me a offer. It'll be a pain in the arse to get so please be reasonable.

Stambo: Did you receive the little clip I sent you?

Keiri: Here's the driver side. The passenger side had the wheel on still, couldnt get a good pic with my phone and I didnt have my tools with me. Both in good shape.

[njccmd2002]

76 77 celica

[Keiri]

Will you take 50 shipped for the calipers?

Or is the lot going to run you out for lowballing?

[bloodMoney]

Where is this yard? I'm in town for the next month and a half and could use some stuff......

[SoDo]

Will you take 50 shipped for the calipers?

Or is the lot going to run you out for lowballing?

I'll check and see what the price is for them tomorrow.

76 77 celica

I'm not sure if they have that old, but they do move cars in and out quickly. I'll let you know if I find any within the next few weeks.

Where is this yard? I'm in town for the next month and a half and could use some stuff......

I'm in Colorado. I'll be driving my 6gc back to the city the 1st week of August hopefully.

[bloodMoney]

Damn! You got me all exited for nothing....

[SoDo]

Haha. My boss in the city knows a few yards up there. He said something about 1 yard that has 50% off u pull it. I'll have to check them out.

[SoDo]

Found a black 94 st coupe at a different yard today. Pm me what parts you need and I can find out how much they are. This yard doesnt have a pricing sheet for parts unlike the other yard where the gt is.

[enderswift]

how is that arm rest looking? any rips or hard spots? if its in good condition how much to 60131?

[SoDo]

how is that arm rest looking? any rips or hard spots? if its in good condition how much to 60131?

The hatchback one is gone. I'll have to look at the coupe again. It's a plastic lid, not a cushioned leather one like the one in my 6gc. I'll be there again on Monday and will send you pics. Thanks.


This post has been edited by SoDo: Jul 23, 2010 - 11:18 PM

[ChfNix]

How about the plastic thing that covers the nut to take off the tail lights in a hatch? (Is that clear? If not I will take a pic of mine.) Also the driver side front mud flap off of the black one?

[SoDo]

How about the plastic thing that covers the nut to take off the tail lights in a hatch? (Is that clear? If not I will take a pic of mine.) Also the driver side front mud flap off of the black one?

I think I know what your talking about. I'll check on both on Monday.

[ChfNix]

Here you go, I just need one....



In the back of the hatch.

[SoDo]

Kool. I remember those. I think I'm missing one as well. I'll check on monday and hopefully its still there, but I'll let you know. BTW nice memphis sub.

This post has been edited by SoDo: Jul 24, 2010 - 1:37 PM

[ChfNix]

Sweet man, thanks!

[mkernz22]

what condition are the hood and driver's side fender in on the black coupe?
how much for them with shipping to 02766?
PM me! thanks!

This post has been edited by mkernz22: Jul 26, 2010 - 8:36 AM

[SoDo]

what condition are the hood and driver's side fender in on the black coupe?
how much for them with shipping to 02766?
PM me! thanks!

Hood is damaged on the coupe. The drivers fender is in good shape. Most of the front end damage is to the passenger side. The hatchback hood is ok. I'll send you some pics later today.

This post has been edited by SoDo: Jul 26, 2010 - 12:49 PM

[mkernz22]

Alright, the hood's not a big deal. Let me know about the fender though.
How much for it and how much for shipping?

[Success21]

i need doors for my 96 st hatch how are the doors on those cars?

[SoDo]

i need doors for my 96 st hatch how are the doors on those cars?

The doors are good. The door panels are not. I can send you pics.

[Success21]

i need doors for my 96 st hatch how are the doors on those cars?

The doors are good. The door panels are not. I can send you pics.

are the doors power or crank windows ? i would prefer the coupe doors because the will match my car if they fit

[SoDo]

i need doors for my 96 st hatch how are the doors on those cars?

The doors are good. The door panels are not. I can send you pics.

are the doors power or crank windows ? i would prefer the coupe doors because the will match my car if they fit

The coupe has crank windows and the hatch has power. The hatch has no driver window regulator/motor and the interior panel is bad, but the door itself is fine. The hatch doors would be cheaper although you would have to paint them. Where the coupe is at they dont have a pricing sheet so I dont know how much they want. They have a old cowboy sitting on a stool giving you prices based on looks and what car it came from. Usually the yard where the hatch is cheaper most the time and they have 1 price for each part for any car out there. I can take pics if you like.

[nik]

i need the driver side rear window outta the hatch ..... 45 shipped?

[SoDo]

I'll check on how much shipping is. Anyone know what shipping service has the best price to ship large/odd shaped items? Last I knew fed ex had the best deals for weight and size.

[JPATTT]

man what junkyard are you going to, i live in milwaukee wi and or rockford il area would love to know what junkyard actually carries 6 gen celicas...

[SoDo]

man what junkyard are you going to, i live in milwaukee wi and or rockford il area would love to know what junkyard actually carries 6 gen celicas...

I'm in Colorado. Driving back to Chicago hopefully at the end of next week. If I find any up there I'll let you know.

This post has been edited by SoDo: Jul 29, 2010 - 11:14 AM

[mariosdarkworld]

How much for the windshield washer bottle? Also the Radio Bezel the one w/ the A/c vents and also passengerside visor.

Oh and also The black visor that goes on the outside of the windows...Do you know what Im talkn about? Like the driver and passenger window seal its a black long strip on both doors

[Joe_1985]

need the toyota badge off the deck lid of the coupe, how much to 32259?

oh and i need a driver front mudflap

This post has been edited by Joe_1985: Jul 29, 2010 - 3:35 PM

[SoDo]

How much for the windshield washer bottle? Also the Radio Bezel the one w/ the A/c vents and also passengerside visor.

Oh and also The black visor that goes on the outside of the windows...Do you know what Im talkn about? Like the driver and passenger window seal its a black long strip on both doors

Let me check on the windshield washer bottle, radio bezel and the passenger sun visor. So you want the weather stripping that goes on the top outside curve of the window?

[SoDo]

need the toyota badge off the deck lid of the coupe, how much to 32259?

oh and i need a driver front mudflap

Sale pending on the coupe trunk lid . I can ask the member if he needs the badge or not if he buys it. Driver mudflap is sold. Passenger side is available.

[celicaboston1983]

does the gt still have rear calipers if so let me know what shape there in thanks

[SoDo]

does the gt still have rear calipers if so let me know what shape there in thanks

Yes. If I can get the back wheels off I'll look at them.

[HectortheRican]

Do you have the RH side turn signal socket? I think they're both the same but just to be safe... I just need the socket, but if you've got it, just cut the wire a few inches up, I'll mess with it. Thanks!

[SoDo]

Do you have the RH side turn signal socket? I think they're both the same but just to be safe... I just need the socket, but if you've got it, just cut the wire a few inches up, I'll mess with it. Thanks!

Like the one in this pic?
http://i742.photobucket.com/albums/xx64/So.../PIC-0088_2.jpg

[HectortheRican]

Do you have the RH side turn signal socket? I think they're both the same but just to be safe... I just need the socket, but if you've got it, just cut the wire a few inches up, I'll mess with it. Thanks!

Like the one in this pic?
http://i742.photobucket.com/albums/xx64/So.../PIC-0088_2.jpg

Yeah, it'll work from any year. I don't need the turn signal housing, just the socket. You know, the part you plug in. If you can get me that whole socket plus a few inches of wire up, that'd be great

[SoDo]

Do you have the RH side turn signal socket? I think they're both the same but just to be safe... I just need the socket, but if you've got it, just cut the wire a few inches up, I'll mess with it. Thanks!

Like the one in this pic?
http://i742.photobucket.com/albums/xx64/So.../PIC-0088_2.jpg

Yeah, it'll work from any year. I don't need the turn signal housing, just the socket. You know, the part you plug in. If you can get me that whole socket plus a few inches of wire up, that'd be great

Gottcha. Just the plastic piece that holds the bulb and connects to the housing.

[HectortheRican]

Gottcha. Just the plastic piece that holds the bulb and connects to the housing.

In the parts catalogue, 2nd page, in the turn signal lamp area. I need #3 and the few inches of wire leading up. Let me know how much shipping is to 76180

[trd_420]

need driver side rear caliper braket how much for it overnight to zipcode 91605...need asap

[SoDo]

need driver side rear caliper braket how much for it overnight to zipcode 91605...need asap

I'll let you know tomorrow.

[celicaboston1983]

can you always check the brake lines for the gt too thanks

[SoDo]

Cant get the back wheels off. Someone torched the lugnuts and I dont have a torch to heat it up. I'll check on the brake lines

[Bigblock]

X2 on doors for a hatchback!! Price & availability?? I can make the drive sometime this week!!

[SoDo]

Doors from the coupe are SOLD!! I'll pm you pics and price for the hatch doors. Also, I'm in Colorado right now not Chicago.

[SoDo]

3 days left to get parts. pm me if you need anything.

[thatmr2]

for the celica GT I need left side windshield nozzle spray. How much for that and the rims?

[SoDo]

for the celica GT I need left side windshield nozzle spray. How much for that and the rims?

Hood is gone from the gt. Wheels are no good. I can check on the coupe. Probably $12 shipped.

[Black0nBlack94]

Hi...I need both the upper and lower timming belt cover, you gotta take off the alternator belt and the crankshaft pulley to get of the bottom cover of you can get it off without breaking them I'll take themlemme know how much you want for them first though w/ shipping. they wiegh like 2lbs at the most. Shipp to Bronx Ny 10466. I did my timming belt and waterpump on my vert and I damaged the cover.hope you can elp me. Thanks PM me.

[SoDo]

Hi...I need both the upper and lower timming belt cover, you gotta take off the alternator belt and the crankshaft pulley to get of the bottom cover of you can get it off without breaking them I'll take themlemme know how much you want for them first though w/ shipping. they wiegh like 2lbs at the most. Shipp to Bronx Ny 10466. I did my timming belt and waterpump on my vert and I damaged the cover.hope you can elp me. Thanks PM me.

The timing belt cover is damaged sorry.