Indash dvd player Options

[99celiGT]

does any1 have a write up on how to install a indash dvd into a 6gc

[jordisonjr]

It's really simple:
-twist off shift nob
-carefully pull of the trim surrounding the shifter
- pull off the trim around the radio. Its a little tricky but don't be scared to give it a good pull.

next just remove the screws holding in stock radio.

It should be two units, I believe its a cd player and then the radio. The two are held together by a a bracket.
So unbolt the bracket and then you have to put the bracket on to your new screen (assuming its a double din screen not a flip.)

Wire in the harness and your basically set to go. You can bolt the brackets into the car and then put all the trim pieces back in.

I hope that makes at least a little bit of sense, If you need a hand let me know, I've had mine in and out numerous times.

[Smiley]

if its a 7 inch dvd one like mine you may need to do some minor modifcation to the surround as the plastic hole may be slightly to small id recomend using a dremal tool but it can be done with a normal drill if you take your time although will not be as neat