6G Celicas Forums

Welcome Guest ( Log In | Register )

4 Pages V   1 2 3 > »   
Closed TopicStart new topic
> PLEASE CLOSE THIS THREAD THANK YOU!, Car has been sold to my local Junkyard
post Feb 6, 2011 - 5:40 AM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




Well I currently got in an accident about 2 months ago on Dec. 13 2010. I'm parting out this car as I have recently bought erahmans 99 gt celica.

The engine has 133,000 miles and is in great running condition. I always beat the hell out of it and never did me wrong. I have replaced alot of maintenance parts on it within the past 15,000 miles. Here is a list of the engine maintenance parts that were replaced with the mileage I have accumulated on them:

-Both NTK Post and Pre Oxygen Sensors 20,000 used miles, both for $50
-New PCV Valve 10,000 miles, free
-New Toyota OEM Fuel Filter 10,000 miles. $10
-C52 Transmission refilled with 2.7 liters of Penzoil Syncromesh about 5,000 miles ago and has smooth shifting.
-New OEM Thermostat 6,000 miles $10
-Front Brake Pads and Rotors purchased off ebay have 17,000 miles on them. Good stopping power no joke tongue.gif Pads are about 40% worn down as seen in pics. I also bought new OEM brake Shims for both sides.
-Interior is in Excellent Condition Pretty Much Perfect. Airbags did deploy when I got in the accident. Dash, front and rear seats are all in great condition.
-Ebay 7A-FE header is wrapped and i also have a 94-95 obd1 stock exhaust header with custom down pipe. The ebay header and stock header with custom down pipe are exactly the same length. When I bought my magnaflow exhaust system from a local exhaust shop I still had my stock header and stock front downpipe, so the exhaust shop just did a custom cat back exhaust system. The custom downpipe that fits the stock header has a 2.25 inch piping at the end.
- Eibach Sportline Springs used with roughly 15,000 miles, but most springs come with a million mile warranty. I will need to trade someone for there stock springs once you buy my Eibach Sportline Springs
-7th Gen Celica GT-S wheels. Has two new 205/50R16 Dunlop Direzza DZ101 Ultra Hi Performance Summer Tires with about 300 miles on them. You will need to buy another 2 Dunlop Direzza dz101 for the fronts as the current tires on there are some worn falken fk452 with barely any tread on them. $300 I'll be taking pics of the rims on this upcoming saturday when I have plenty of sunlight outside!!! so stay tuned they are in great condition
-Custom made Wood that fits in the trunk so you can use a 185/70R14 size spare in there and you will have a flat surface to place stuff in the trunk. $40 comes with
-Those looking for auto to manual swap on their slower auto 7afe engines wink.gif $400 for Everything including used Exedy Stage 1 Clutch Kit with 18,000 miles

I have a wide variety of tools in my garage and I don't work on Saturday and Sunday. So if you guys need help taking off any parts I can assist you on the weekends. I have enough tools here in my garage to do an engine swap and then some just so you get an idea. I have taken great care of my celica until the accident always making sure everything was in working order and always staying on top of maintenance.

Things not for sale:

Pioneer Head unit w/ Ipod adapter, Catalytic Back Exhaust System, 94-95 Two Post Hatchback Trunk including the spoiler and black plastics that sit under the engine bay and under the fenders. None of the front panels are available as well (hood and both fenders are gone). Another thing is that I do not want to part out any suspension parts, as whenever I decide to give my car to the junkyard the car will need to have working suspension so they can steer the thing onto the tow truck. I think I've covered it all here are the pics!!! throw me some offers.

























This post has been edited by BonzaiCelica: Apr 16, 2011 - 12:23 AM


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Feb 6, 2011 - 12:17 PM
+Quote Post
chacha

Enthusiast
*****
Joined Dec 29, '05
From So-Cal
Currently Offline

Reputation: 12 (100%)




ill take the trunk shocks, ntk o2 sensor, dash cover...

**just found out...your post o2 sensor is different from the ST compared to the GT...


ill just take the pre cat sensor.

This post has been edited by chacha: Feb 6, 2011 - 12:34 PM
post Feb 6, 2011 - 1:12 PM
+Quote Post
cyb593



Enthusiast
***
Joined Feb 22, '04
From USA
Currently Offline

Reputation: 3 (100%)




you wouldnt happen to have the 2 litle pieces that the hatch cover clips into would you?

http://s1137.photobucket.com/albums/n507/bwestfall85/
post Feb 6, 2011 - 4:25 PM
+Quote Post
windowlicker



Enthusiast
***
Joined Jul 2, '08
From SoCal
Currently Offline

Reputation: 6 (100%)




sucks to hear about the car man, but sounds like you got into a good car. what are you looking to get for the engine? my 214k mile engine is not too happy with me and i'm trying to see if i can get a engine for a decent price.
post Feb 6, 2011 - 7:29 PM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




QUOTE (windowlicker @ Feb 6, 2011 - 4:25 PM) *
sucks to hear about the car man, but sounds like you got into a good car. what are you looking to get for the engine? my 214k mile engine is not too happy with me and I'm trying to see if i can get a engine for a decent price.


yo Chris I actually tried calling you today as I remember you telling me how you wanted a manual tranny real badly. I'd be willing to sell you everything you need for the swap for $600. I just thought about it you have OBD II and my engine is OBD I. From reading dmv regulations and all that bs is that you can all only swap en engine from a newer car or the same year but nothing older, so that's totally on you. I've never done an engine swap but I could help you take everything out since I have tools at my place.

oh ya man, I got a great deal on the new celica, its way better than my slow 7afe, but I enjoyed everything about my slow celica while it lasted biggrin.gif


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Feb 6, 2011 - 9:18 PM
+Quote Post
sunwukongg



Enthusiast
***
Joined Mar 10, '08
From Socal, OC
Currently Offline

Reputation: 7 (100%)




how much for the dash design cloth cover?!
post Feb 6, 2011 - 9:53 PM
+Quote Post
HectortheRican



Enthusiast
*****
Joined Dec 26, '09
From Albuquerque, NM
Currently Offline

Reputation: 19 (100%)




How much for the strips that go between the sides of the front bumper and the fenders? The strip with the 3 bolts sticking out of them. How much for both of them plus the 6 bolts?


--------------------
taking too long to mod since '09
June '12 COTM
'95 AT200
post Feb 6, 2011 - 10:28 PM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




QUOTE (sunwukongg @ Feb 6, 2011 - 10:18 PM) *
how much for the dash design cloth cover?!


$40 local pickup laugh.gif i bought this thing for $60 from dealership. pending sale though so I'll let you know if it doesn't go through.


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Feb 6, 2011 - 10:32 PM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




QUOTE (cyb593 @ Feb 6, 2011 - 2:12 PM) *
you wouldnt happen to have the 2 litle pieces that the hatch cover clips into would you?

http://s1137.photobucket.com/albums/n507/bwestfall85/


I only have the one on the left side as the one on the right is broken off. I think I remember seeing a spare one somewhere around my room or in the garage. I might have thrown it away, so if I find em it I'll let you know.


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Feb 7, 2011 - 12:22 AM
+Quote Post
windowlicker



Enthusiast
***
Joined Jul 2, '08
From SoCal
Currently Offline

Reputation: 6 (100%)




QUOTE (BonzaiCelica @ Feb 6, 2011 - 7:29 PM) *
QUOTE (windowlicker @ Feb 6, 2011 - 4:25 PM) *
sucks to hear about the car man, but sounds like you got into a good car. what are you looking to get for the engine? my 214k mile engine is not too happy with me and I'm trying to see if i can get a engine for a decent price.


yo Chris I actually tried calling you today as I remember you telling me how you wanted a manual tranny real badly. I'd be willing to sell you everything you need for the swap for $600. I just thought about it you have OBD II and my engine is OBD I. From reading dmv regulations and all that bs is that you can all only swap en engine from a newer car or the same year but nothing older, so that's totally on you. I've never done an engine swap but I could help you take everything out since I have tools at my place.

oh ya man, I got a great deal on the new celica, its way better than my slow 7afe, but I enjoyed everything about my slow celica while it lasted biggrin.gif


$600 for just the engine or for engine and trans? i figure that i could use your bottom end and my top end with my current wiring and ecu to make things work. not sure if there is a huge difference with sensors, but i'll have to research. just trying to weigh out my options. i've even contemplated selling my car for $1000 and moving onto a subaru.
post Feb 7, 2011 - 1:50 AM
+Quote Post
projectgt

Enthusiast
*
Joined Jan 13, '11
From vandenberg afb, ca
Currently Offline

Reputation: 0 (0%)




How much for the kgb and springs? What's the drop on it?
post Feb 7, 2011 - 2:37 AM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




QUOTE (windowlicker @ Feb 7, 2011 - 12:22 AM) *
QUOTE (BonzaiCelica @ Feb 6, 2011 - 7:29 PM) *
QUOTE (windowlicker @ Feb 6, 2011 - 4:25 PM) *
sucks to hear about the car man, but sounds like you got into a good car. what are you looking to get for the engine? my 214k mile engine is not too happy with me and I'm trying to see if i can get a engine for a decent price.


yo Chris I actually tried calling you today as I remember you telling me how you wanted a manual tranny real badly. I'd be willing to sell you everything you need for the swap for $600. I just thought about it you have OBD II and my engine is OBD I. From reading dmv regulations and all that bs is that you can all only swap en engine from a newer car or the same year but nothing older, so that's totally on you. I've never done an engine swap but I could help you take everything out since I have tools at my place.

oh ya man, I got a great deal on the new celica, its way better than my slow 7afe, but I enjoyed everything about my slow celica while it lasted biggrin.gif


$600 for just the engine or for engine and trans? i figure that i could use your bottom end and my top end with my current wiring and ecu to make things work. not sure if there is a huge difference with sensors, but i'll have to research. just trying to weigh out my options. i've even contemplated selling my car for $1000 and moving onto a subaru.


ok ok. well if not I'll give it to you for $500. so just think about it


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Feb 7, 2011 - 2:40 AM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




QUOTE (HectortheRican @ Feb 6, 2011 - 9:53 PM) *
How much for the strips that go between the sides of the front bumper and the fenders? The strip with the 3 bolts sticking out of them. How much for both of them plus the 6 bolts?


hmm what are you talking about the black plastics that are underneath the car?? you mind editing a photo with paint and pointing towards it with an arrow or find me a pic of it please. I'm clueless as to what your talking about. kindasad.gif


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Feb 7, 2011 - 2:58 AM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




QUOTE (projectgt @ Feb 7, 2011 - 1:50 AM) *
How much for the kgb and springs? What's the drop on it?


There is a pending sale on the KYB GR-2 Shocks. I will be selling the Eibach Sportline Springs for $140. These springs usually sell for atleast $200 and above. here is a wellknown site just so you get an idea of how much they are http://www.horsepowerfreaks.com/performanc...pension/Springs

So it would be $165 with shipping included. The Drop on both the front is 1.5 inches. Here is a pic of how they looked on a 99 Celica GT. Might not be the greatest pics but it was a good drop. The tires on the silver celica are 205/50R16 and there is very minimal wheel gap as you can see. You can stick about 3 fingers in the back and 4 fingers in the front, that's the wheel gap from the fender to the top of the tire.

http://www.6gc.net/forums/index.php?showto...mp;#entry860804

This post has been edited by BonzaiCelica: Feb 7, 2011 - 3:49 AM


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Feb 7, 2011 - 3:39 AM
+Quote Post
HectortheRican



Enthusiast
*****
Joined Dec 26, '09
From Albuquerque, NM
Currently Offline

Reputation: 19 (100%)




QUOTE (BonzaiCelica @ Feb 7, 2011 - 1:40 AM) *
QUOTE (HectortheRican @ Feb 6, 2011 - 9:53 PM) *
How much for the strips that go between the sides of the front bumper and the fenders? The strip with the 3 bolts sticking out of them. How much for both of them plus the 6 bolts?


hmm what are you talking about the black plastics that are underneath the car?? you mind editing a photo with paint and pointing towards it with an arrow or find me a pic of it please. I'm clueless as to what your talking about. kindasad.gif


On the top left, they're item #2. They're this pair of strips that go between the sides of the front bumper and the front-parts of the fenders. It's just a slim piece of plastic with 3 bolts coming out of them. There's one on each side. Do you understand what part I'm talking about now?


--------------------
taking too long to mod since '09
June '12 COTM
'95 AT200
post Feb 7, 2011 - 10:05 PM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




Pending Sale on Trunk Lift Supports, Dashboard Cover, and KYB GR-2!!


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Feb 8, 2011 - 12:02 AM
+Quote Post
chrisbf429

Enthusiast

Joined May 18, '10
From Omaha
Currently Offline

Reputation: 0 (0%)




any chance you're selling the ac control part of the dash? if so, pm me please
post Feb 8, 2011 - 11:52 PM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




QUOTE (windowlicker @ Feb 7, 2011 - 1:22 AM) *
QUOTE (BonzaiCelica @ Feb 6, 2011 - 7:29 PM) *
QUOTE (windowlicker @ Feb 6, 2011 - 4:25 PM) *
sucks to hear about the car man, but sounds like you got into a good car. what are you looking to get for the engine? my 214k mile engine is not too happy with me and I'm trying to see if i can get a engine for a decent price.


yo Chris I actually tried calling you today as I remember you telling me how you wanted a manual tranny real badly. I'd be willing to sell you everything you need for the swap for $600. I just thought about it you have OBD II and my engine is OBD I. From reading dmv regulations and all that bs is that you can all only swap en engine from a newer car or the same year but nothing older, so that's totally on you. I've never done an engine swap but I could help you take everything out since I have tools at my place.

oh ya man, I got a great deal on the new celica, its way better than my slow 7afe, but I enjoyed everything about my slow celica while it lasted biggrin.gif


$600 for just the engine or for engine and trans? i figure that i could use your bottom end and my top end with my current wiring and ecu to make things work. not sure if there is a huge difference with sensors, but i'll have to research. just trying to weigh out my options. i've even contemplated selling my car for $1000 and moving onto a subaru.


you can take both the engine and transmission for $500!!!


This post has been edited by BonzaiCelica: Feb 8, 2011 - 11:55 PM


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Feb 9, 2011 - 12:10 AM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




yo Hector are you talking about this??



if not here is a pic of the front use paint or photobucket editor to point out what your talking about. if the first image that I posted wasnt what you were looking for.




--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Feb 9, 2011 - 12:13 AM
+Quote Post
HectortheRican



Enthusiast
*****
Joined Dec 26, '09
From Albuquerque, NM
Currently Offline

Reputation: 19 (100%)




QUOTE (BonzaiCelica @ Feb 8, 2011 - 11:10 PM) *
yo Hector are you talking about this??

See those three holes on the fender? The plastic strip goes behind them, the bolts come out, they go into the bumper, and you tighten a nut on the other side of the bumper. Sorry I wasn't specific in a picture, I just didn't know I could do that in photobucket lol


--------------------
taking too long to mod since '09
June '12 COTM
'95 AT200
post Feb 9, 2011 - 12:30 AM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




hey hector I'm taken out my front bumper from my 94 celica several times and I never saw that piece. Shoot I even took out the crashed fender from my 99 gt and nothing was there. Sorry I guess I don't have it frown.gif


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Feb 9, 2011 - 12:42 AM
+Quote Post
HectortheRican



Enthusiast
*****
Joined Dec 26, '09
From Albuquerque, NM
Currently Offline

Reputation: 19 (100%)




Daaarnnnn. Alright, thanks for your time though smile.gif I bet they won't be too much if I order them from the dealer. I've got zip ties in the and they work fine, but it's the kind of "I want the real thing" kind of thing haha


--------------------
taking too long to mod since '09
June '12 COTM
'95 AT200
post Feb 9, 2011 - 9:37 PM
+Quote Post
KrowzerWolf

Enthusiast

Joined Feb 9, '11
From North Carolina
Currently Offline

Reputation: 0 (0%)




How much do you want for your header back system and is there any damage to it? I have been looking for something but not very many companies carry stuff for the 1.8L
post Feb 9, 2011 - 11:31 PM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




QUOTE (KrowzerWolf @ Feb 9, 2011 - 9:37 PM) *
How much do you want for your header back system and is there any damage to it? I have been looking for something but not very many companies carry stuff for the 1.8L


haha your the second person that asked me about the exhaust system. No I didn't buy it from any company or manufacturer. I just went to my nearest exhaust shop and they bent 2.25 inch piping added a high flow magnaflow catalytic converter and stuck an magnaflow exhaust on the end. And NOOO! the exhaust sytem is not for sale only the oem header and 7afe ebay header is for sale. I said it in the beginning.


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Feb 10, 2011 - 9:29 AM
+Quote Post
KrowzerWolf

Enthusiast

Joined Feb 9, '11
From North Carolina
Currently Offline

Reputation: 0 (0%)




My bad I was doing a search with my cell when this came up I should have read all the post lol
post Feb 10, 2011 - 4:10 PM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




QUOTE (KrowzerWolf @ Feb 10, 2011 - 10:29 AM) *
My bad I was doing a search with my cell when this came up I should have read all the post lol


no problem wink.gif


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Feb 12, 2011 - 5:10 PM
+Quote Post
EKAn



Enthusiast
**
Joined Apr 24, '07
From CA
Currently Offline

Reputation: 1 (100%)




how much for the two door panels?


--------------------
QUOTE
what hes saying is if you put blue lights in you car youll lose hp.
post Feb 13, 2011 - 12:23 AM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




update:

Door Panels, which masked man just took from me a few hours ago are sold!!! Also sold is the dash cover, lift support shocks for the trunk(and damn the hatchback trunk is heavy!!!), and KYB GR-2 are sold already. I also no longer have the center cover console as I swapped that over to my 99 gt celica. that's all for now.


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Feb 13, 2011 - 8:34 PM
+Quote Post
Zake



Enthusiast
****
Joined Mar 7, '10
From Ft. Lauderdale
Currently Offline

Reputation: 9 (100%)




how much for this and the vents that are attached? shipped to 60112


This post has been edited by Zake: Feb 13, 2011 - 8:35 PM


--------------------

Never Forget. - 2013 Mustang. I miss you every day.
post Feb 13, 2011 - 9:54 PM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




QUOTE (Zake @ Feb 13, 2011 - 8:34 PM) *
how much for this and the vents that are attached? shipped to 60112


$65 Shipped email me on 6gc and we will talk more about shipping and payment. thanks biggrin.gif


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Feb 14, 2011 - 3:36 PM
+Quote Post
brk34

Enthusiast
**
Joined Jan 20, '08
From New York
Currently Offline

Reputation: 1 (100%)




Do you have the metal mounts for the passenger side airbag?
post Feb 15, 2011 - 4:17 AM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




metal mounts for passenger side airbag huh. I'm not quite sure what It looks like but I will definite take a look at it tomorrow and snap some photos wink.gif


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Feb 15, 2011 - 9:58 AM
+Quote Post
brk34

Enthusiast
**
Joined Jan 20, '08
From New York
Currently Offline

Reputation: 1 (100%)





Here's the image that the parts catalog gives.
post Feb 15, 2011 - 2:29 PM
+Quote Post
chacha

Enthusiast
*****
Joined Dec 29, '05
From So-Cal
Currently Offline

Reputation: 12 (100%)




Thanks B, great seller.
post Feb 15, 2011 - 8:26 PM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




no problem chacha

On reserve for Tomaszz!!! as well as the rear view mirror!



--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Feb 16, 2011 - 1:38 AM
+Quote Post
playboymma



Enthusiast
*
Joined Jan 7, '11
From Mena, AR
Currently Offline

Reputation: 0 (0%)




how much for the wheel hubs shipped to 71953


--------------------
I went full retard once, too. Its OK.
post Feb 16, 2011 - 3:22 AM
+Quote Post
Davesceli

Enthusiast
**
Joined Apr 24, '04
From S. Cali
Currently Offline

Reputation: 0 (0%)




HOw much for the rear spoiler? I'm in LA, dont need to ship
post Feb 16, 2011 - 4:12 PM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




QUOTE (playboymma @ Feb 16, 2011 - 1:38 AM) *
how much for the wheel hubs shipped to 71953



QUOTE (Davesceli @ Feb 16, 2011 - 3:22 AM) *
HOw much for the rear spoiler? I'm in LA, dont need to ship


Hey playboymma I want the car to be able to move onto the towing truck when I decide its time to give it to my nearest junkyard. so for now i'm not parting out that for you just yet.

hey davesceli, I put up in the initial post that I was keeping the 94-95 two post hatchback. I also mean I was keeping the spoiler as well sorry.


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Feb 16, 2011 - 8:51 PM
+Quote Post
Diice

Enthusiast

Joined Aug 24, '10
From NY
Currently Offline

Reputation: 1 (100%)




How Much for the driver side headlight with the rubber around it? ship to 11208!
PM also sent
post Feb 16, 2011 - 9:15 PM
+Quote Post
brk34

Enthusiast
**
Joined Jan 20, '08
From New York
Currently Offline

Reputation: 1 (100%)




Did you get a change to look for the mounts?
post Feb 17, 2011 - 2:59 AM
+Quote Post
playboymma



Enthusiast
*
Joined Jan 7, '11
From Mena, AR
Currently Offline

Reputation: 0 (0%)




well if you change ur mind i REALLY need a set of hubs. how bout a trade? mine are wore out but when put on the car will still roll


--------------------
I went full retard once, too. Its OK.
post Feb 17, 2011 - 3:18 AM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




QUOTE (playboymma @ Feb 17, 2011 - 3:59 AM) *
well if you change ur mind i REALLY need a set of hubs. how bout a trade? mine are wore out but when put on the car will still roll


ya now a trade sounds better to me! I'm really busy at the moment still trying to put my celica back together. SO i can register smog it and finally have something to drive around town. So if anything it wont be till next weekend.


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Feb 17, 2011 - 3:57 AM
+Quote Post
playboymma



Enthusiast
*
Joined Jan 7, '11
From Mena, AR
Currently Offline

Reputation: 0 (0%)




well i can tell u just how to pull it apart and put it back together in 10 minutes. pm me please i dont want to clutter up your thread


--------------------
I went full retard once, too. Its OK.
post Feb 17, 2011 - 8:33 PM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




oh ya the sale of the used kyb gr-2 didn't go through. Now available KYB GR-2 used with 15,000 miles and attached to them are eibach sportline springs. I'm currently pending a sale on the springs. I would just like someone to pick up the shocks and I'll help you install them here at my house for $200

I wish I could just sell the whole assembly for $350, that would be awesome, but as I said pending sale on the springs.


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Feb 18, 2011 - 3:56 PM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




QUOTE (brk34 @ Feb 16, 2011 - 9:15 PM) *
Did you get a change to look for the mounts?





are these the ones your looking for???


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Feb 19, 2011 - 1:43 AM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




Shifter Surround $20 Shipped
Sun Visors with Clips $25 Shipped.
AC Switch $40 Shipped.












--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Feb 26, 2011 - 1:57 AM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




update : Both Front Knuckles are sold!


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Mar 5, 2011 - 4:29 PM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




well I finally took out the dashboard, if anyone is even interested and brave enough to install mine on their celica local pick up. $100





This post has been edited by BonzaiCelica: Mar 5, 2011 - 4:29 PM


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Mar 21, 2011 - 2:19 AM
+Quote Post
projectgt

Enthusiast
*
Joined Jan 13, '11
From vandenberg afb, ca
Currently Offline

Reputation: 0 (0%)




Bump.. starter still available?
post Mar 21, 2011 - 3:13 AM
+Quote Post
chacha

Enthusiast
*****
Joined Dec 29, '05
From So-Cal
Currently Offline

Reputation: 12 (100%)




B, i need the door courtesy lights...both...pm me
post Mar 21, 2011 - 3:23 AM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




QUOTE (projectgt @ Mar 21, 2011 - 3:19 AM) *
Bump.. starter still available?


yep starter is still available and its a re manufactured one that I bought from Kragen a year ago.


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Mar 21, 2011 - 6:45 AM
+Quote Post
96stgreendemon



Enthusiast
*****
Joined Oct 7, '09
From Northern kentucky
Currently Offline

Reputation: 8 (90%)




Price on the uncut engine harness?


--------------------
1996 Toyota Celica Project Mean Green
3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <3

2001 Solar yellow Lexus IS300

2001 Dodge ram 1500 Off-road edition
post Mar 21, 2011 - 9:45 AM
+Quote Post
7afecelica

Enthusiast

Joined Sep 16, '10
From Warren, MI
Currently Offline

Reputation: 0 (0%)




How much for ur ebay header? And price for ur exhaust system ?

This post has been edited by 7afecelica: Mar 21, 2011 - 9:48 AM
post Mar 21, 2011 - 10:31 AM
+Quote Post
projectgt

Enthusiast
*
Joined Jan 13, '11
From vandenberg afb, ca
Currently Offline

Reputation: 0 (0%)




How much for the starter shipped to 93437?
post Mar 21, 2011 - 9:22 PM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




QUOTE (projectgt @ Mar 21, 2011 - 10:31 AM) *
How much for the starter shipped to 93437?


ah c'mon don't do this to me. taking it out is such a pain hehe!!! but ya $40 Shipped.


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Mar 23, 2011 - 10:43 PM
+Quote Post
TRox97

Enthusiast

Joined Jan 29, '11
From Texas
Currently Offline

Reputation: 1 (100%)




Do you still have the driver side headlight? I'm interested if not already sold. Ship to 76234.
post Mar 24, 2011 - 1:43 AM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




QUOTE (7afecelica @ Mar 21, 2011 - 9:45 AM) *
How much for ur ebay header? And price for ur exhaust system ?


i already have two other people who asked before you. If those guys don't pull through I'll let you know

the catalytic back exhaust system is not for sale!!!!!

This post has been edited by BonzaiCelica: Mar 24, 2011 - 1:44 AM


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Mar 24, 2011 - 1:51 AM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




QUOTE (96stgreendemon @ Mar 21, 2011 - 6:45 AM) *
Price on the uncut engine harness?


$150 Shipped with tracking and $150 insurance coverage through US Postal Service...

This post has been edited by BonzaiCelica: Mar 24, 2011 - 2:03 AM


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Apr 4, 2011 - 12:01 AM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




-Driver Side Low beam Headlight sold.
-Used Kraigen Starter Sold.

Car will no longer be in my Driveway after April 16th, so if you guys do not have money ready in hand and you want me to hold onto anything for you, let me know by april 15th!!!!!

This post has been edited by BonzaiCelica: Apr 4, 2011 - 12:03 AM


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Apr 4, 2011 - 12:17 PM
+Quote Post
xmaniex23

Enthusiast
*
Joined May 3, '10
From Los Angeles, CA
Currently Offline

Reputation: 1 (100%)




is the driver side fender still up for sale, if so how much for the fender and the fenderliner?
post Apr 5, 2011 - 12:51 AM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




naw man its not. But I do have a silver driver side fender if your interested in it. Its a bit rusted on the top portion of it.


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Apr 5, 2011 - 2:48 AM
+Quote Post
Mosaiah

Enthusiast
*
Joined Jan 23, '05
From Avondale, AZ
Currently Offline

Reputation: 0 (0%)




Do you have any of the headlights or taillights left? If so, how much shipped to 85541?
post Apr 7, 2011 - 12:30 AM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




Update: Door Sills, Glove Box, A/C Lines and Rear Driver Side Rear seat belt buckle clicker and sun visors sold!!!....

like i said if you need any things for my car but you can't buy it at the moment. Let me know and I'll save em for you as my car is going to the Junkyard on the 16th.

This post has been edited by BonzaiCelica: Apr 13, 2011 - 2:07 AM


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Apr 9, 2011 - 3:34 PM
+Quote Post
mrgignac



Enthusiast

Joined May 18, '09
From Maine
Currently Offline

Reputation: 0 (0%)




hi, I was wondering if the passenger side engine shield and passenger side wheel spashguard is available? ive looked everywhere on the net and can only find the driver side ones. id buy em up in a second.

thanks,
mike
post Apr 10, 2011 - 1:35 AM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




QUOTE (mrgignac @ Apr 9, 2011 - 4:34 PM) *
hi, I was wondering if the passenger side engine shield and passenger side wheel spashguard is available? ive looked everywhere on the net and can only find the driver side ones. id buy em up in a second.

thanks,
mike


the splash car that came on my new celica over the passenger side wheel was torn. So I took the 94 celica st passenger splash guard and put it on the new car. Yes I do have the passenger side engine shield by the way


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Apr 13, 2011 - 1:29 AM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




well any last requests anybody. Tomorrow Im putting the rear shocks on so I can have the rear tires touching the floor. Door handles, key cylinder and rear trunk where you put the key in wil be sold to Luis.

A/C Core is pending sale.....

thats all I have for now. car is going to junkyard on friday!!!

This post has been edited by BonzaiCelica: Apr 13, 2011 - 1:29 AM


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Apr 13, 2011 - 9:57 AM
+Quote Post
CoreyST

Enthusiast
*
Joined Feb 25, '11
From Delaware
Currently Offline

Reputation: 0 (0%)




Still have the header? I'll have the money but not till after friday.
post Apr 14, 2011 - 2:44 AM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




QUOTE (CoreyST @ Apr 13, 2011 - 9:57 AM) *
Still have the header? I'll have the money but not till after friday.


your 2nd in line. Sorry I still havent even made the box so that I can package the darn thing. I've been busy putting all the parts back on the crashed celica so the junkyard can take it away on friday.


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
post Apr 14, 2011 - 4:14 PM
+Quote Post
Lilaznsifu

Enthusiast

Joined Mar 7, '10
From Cali
Currently Offline

Reputation: 0 (0%)




Bonzai!

are the 7th Gen Celica GT-S wheels still available?
Can you give me a good deal for them? and shipped to 94577?

also any pix of them? i would like to know the condition

This post has been edited by Lilaznsifu: Apr 14, 2011 - 4:14 PM
post Apr 16, 2011 - 12:21 AM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




QUOTE (Lilaznsifu @ Apr 14, 2011 - 5:14 PM) *
Bonzai!

are the 7th Gen Celica GT-S wheels still available?
Can you give me a good deal for them? and shipped to 94577?

also any pix of them? i would like to know the condition


check your inbox!!

Mods please close aww the good memories will live on forever now onto enjoying my new toy hehe!!!

sold to the junkyard this morning!!!


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514

4 Pages V   1 2 3 > » 
Closed TopicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: August 18th, 2025 - 3:44 AM