6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> Installing a GT-Four rear strut bar
post Apr 13, 2011 - 4:30 PM
+Quote Post
HectortheRican



Enthusiast
*****
Joined Dec 26, '09
From Albuquerque, NM
Currently Offline

Reputation: 19 (100%)




I got my GT-Four rear bar today and, I couldn't get it settled on the strut bolts. I tried jacking up either side to see if that would work, but nothing. The bar would line up with the 4 bolts and sit on them, but I couldn't push it down. Any tips?


--------------------
taking too long to mod since '09
June '12 COTM
'95 AT200
post Apr 13, 2011 - 5:15 PM
+Quote Post
cheela



Enthusiast
*****
Joined Feb 2, '07
From Berlin, WI
Currently Offline

Reputation: 18 (100%)




you probably have it on backwards. make sure it's facing the right way.


--------------------

*1997 Celica ST - 3SGE Greytop BEAMS
*1977 Celica RA29 - Classic Cruiser
*2005 Matrix AWD - dedded but still hanging around like a ghost
2019 Rav4 XLE Premium - Sports mode is fun.
post Apr 13, 2011 - 5:30 PM
+Quote Post
HectortheRican



Enthusiast
*****
Joined Dec 26, '09
From Albuquerque, NM
Currently Offline

Reputation: 19 (100%)




Nope, I had it the right way. There's no it'd fit the other way around, the holes don't line up.


--------------------
taking too long to mod since '09
June '12 COTM
'95 AT200
post Apr 13, 2011 - 6:48 PM
+Quote Post
HectortheRican



Enthusiast
*****
Joined Dec 26, '09
From Albuquerque, NM
Currently Offline

Reputation: 19 (100%)




Got it installed, just jacked it up by the cross member to loosen the chassis up.


--------------------
taking too long to mod since '09
June '12 COTM
'95 AT200
post Apr 13, 2011 - 9:05 PM
+Quote Post
96stgreendemon



Enthusiast
*****
Joined Oct 7, '09
From Northern kentucky
Currently Offline

Reputation: 8 (90%)




lol told ya


--------------------
1996 Toyota Celica Project Mean Green
3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <3

2001 Solar yellow Lexus IS300

2001 Dodge ram 1500 Off-road edition
post Apr 13, 2011 - 10:52 PM
+Quote Post
HectortheRican



Enthusiast
*****
Joined Dec 26, '09
From Albuquerque, NM
Currently Offline

Reputation: 19 (100%)




Thanks, Kyyyyyllleeeeee <3

Lol


--------------------
taking too long to mod since '09
June '12 COTM
'95 AT200
post Apr 14, 2011 - 3:26 AM
+Quote Post
808celica



Enthusiast
*****
Joined Feb 24, '07
From Oahu, Hawaii
Currently Offline

Reputation: 23 (100%)




wait what??? you have to jack the car up to fit the rear bar? i was sitting on my sub box with the car on the ground when i installed, everything fit cherry too.


--------------------
I don't normally drive fast, but when I do its on a curvy section of this island
post Apr 14, 2011 - 7:51 AM
+Quote Post
HectortheRican



Enthusiast
*****
Joined Dec 26, '09
From Albuquerque, NM
Currently Offline

Reputation: 19 (100%)




QUOTE (808celica @ Apr 14, 2011 - 2:26 AM) *
wait what??? you have to jack the car up to fit the rear bar? i was sitting on my sub box with the car on the ground when i installed, everything fit cherry too.

I dunno? I was weird. I was trying to fit it and all 4 bolts were lining up with the holes, but the bar still needed to go down about 2/5" to sit on the tower and I couldn't push it down. I didn't jack the whole car up, I just had to lift it maybe 2 or 3 inches.


--------------------
taking too long to mod since '09
June '12 COTM
'95 AT200
post Apr 14, 2011 - 8:52 AM
+Quote Post
cheela



Enthusiast
*****
Joined Feb 2, '07
From Berlin, WI
Currently Offline

Reputation: 18 (100%)




LOL, well at least you got it to fit.


--------------------

*1997 Celica ST - 3SGE Greytop BEAMS
*1977 Celica RA29 - Classic Cruiser
*2005 Matrix AWD - dedded but still hanging around like a ghost
2019 Rav4 XLE Premium - Sports mode is fun.
post Apr 14, 2011 - 2:51 PM
+Quote Post
808celica



Enthusiast
*****
Joined Feb 24, '07
From Oahu, Hawaii
Currently Offline

Reputation: 23 (100%)




QUOTE (HectortheRican @ Apr 14, 2011 - 2:51 AM) *
QUOTE (808celica @ Apr 14, 2011 - 2:26 AM) *
wait what??? you have to jack the car up to fit the rear bar? i was sitting on my sub box with the car on the ground when i installed, everything fit cherry too.

I dunno? I was weird. I was trying to fit it and all 4 bolts were lining up with the holes, but the bar still needed to go down about 2/5" to sit on the tower and I couldn't push it down. I didn't jack the whole car up, I just had to lift it maybe 2 or 3 inches.

I know your problem laugh.gif


--------------------
I don't normally drive fast, but when I do its on a curvy section of this island
post Apr 16, 2011 - 4:49 PM
+Quote Post
samir0189



Enthusiast
****
Joined Mar 8, '08
From Orlando, Florida
Currently Offline

Reputation: 14 (100%)




QUOTE (cheela @ Apr 14, 2011 - 9:52 AM) *
LOL, well at least you got it to fit.


thats what she said. wink.gif


--------------------
My F/S Thread!

QUOTE
(14:19:21) Daniel: That was a JDM hole in the side of the box too. There was so much JDM trapped inside that box that they couldn't contain it, so they had to put a JDM hole in the box to let the JDM out.

QUOTE
Ferdi says (11:29)
No, it looks like a hooker put her acid vag on your hood. Acid vag = bigger problem than a few dings.

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: June 4th, 2025 - 2:20 PM