6G Celicas Forums

Welcome Guest ( Log In | Register )

2 Pages V   1 2 >  
Reply to this topicStart new topic
> FS: '94 GTS with 3SGTE swap partout!, Everything must go, cheap! More Items Added, 5SFE parts too!&#
post May 4, 2011 - 10:11 AM
+Quote Post
spydercon

Enthusiast

Joined Sep 20, '09
From Cambridge, Ontario
Currently Offline

Reputation: 1 (100%)




Unfortunately I ran out of money for my project so I decided to part it out. These are the parts I have left and i need to sell everything so everything is obo.

Buyer pays shipping.

Email for pictures please!


3SGTE ECU and harness ( harness is missing the clip for the fuel pump resistor pack, so the wires have been taped together and marked.) $125 for both or $65 each

3SGTE Ignitor and coil - $40

3SGTE Intake box and pipe - SOLD

GT front seats (good condition-cloth) - SOLD

Rear seats (good condition) - $30

2 sets of usdm taillights (good condition) - $20 each

side doors (black, good condition, everything works but i very slight bit of rust at the bottom) - SOLD

rear hatch (great condition everything works, black, no spoiler or interior pieces) $100

aluminum radiator with fans (trimmed to fit already and don't know make.) - SOLD

GT shifter and shifter cables - $40

Random interior pieces (speakers, center arm rest, glove box, center console trim pieces, gauge cluster, ac controls) - SOLD

hood latch and brand new cable - $30

3s pressure plate (good condition) - $50

5sfe greddy stage 2 clutch plate (like new great condition) - $75

Cross drilled front rotors and brand new rear rotors (never used) - $50

Power steering reservoir, windsheild washer reservoir (with pump), engine coolant reservoir - $ 30 for all

5sfe ecu - $40

Ebrake lever (good condition) - $15

Front and rear bumper (good condition, few scratches) - $50 for both

Exoticspeed titan t1 muffler 3" inlet 4" outlet, silencer included (bnib) and yonaka high flow cat 3" inlet and outlet - $225 for both

Im trying not to ship the doors and hatch because of their size, so i will be able to meet some where for you to pick them up.


Thanks, Matt

This post has been edited by spydercon: May 31, 2011 - 8:24 AM
post May 4, 2011 - 10:30 AM
+Quote Post
KAOS



Enthusiast
*****
Joined Apr 18, '06
From Calgary, Canada
Currently Offline

Reputation: 37 (100%)




Do you have any pics of your center arm rest by chance?


--------------------
post May 4, 2011 - 10:59 AM
+Quote Post
spydercon

Enthusiast

Joined Sep 20, '09
From Cambridge, Ontario
Currently Offline

Reputation: 1 (100%)




here is a picture of all the interior pieces

http://s107.photobucket.com/albums/m302/Sp...nt=interior.jpg
post May 4, 2011 - 11:50 AM
+Quote Post
lynxiesz



Enthusiast
*
Joined Feb 9, '09
From Toronto
Currently Offline

Reputation: 2 (100%)




There's a bit of rust on both bottoms of doors? Also check pm
post May 4, 2011 - 12:02 PM
+Quote Post
v1becelica



Enthusiast
*
Joined Sep 1, '10
From Toronto
Currently Offline

Reputation: 3 (100%)




How much for just the hood latch? $15? And do you have pictures of the back seats?
post May 4, 2011 - 12:24 PM
+Quote Post
spydercon

Enthusiast

Joined Sep 20, '09
From Cambridge, Ontario
Currently Offline

Reputation: 1 (100%)




QUOTE (lynxiesz @ May 4, 2011 - 12:50 PM) *
There's a bit of rust on both bottoms of doors? Also check pm


Ya just a tiny bit, it could easily be sanded off. There are no holes its still all solid.


QUOTE (v1becelica @ May 4, 2011 - 1:02 PM) *
How much for just the hood latch? $15? And do you have pictures of the back seats?


Would you do 20 for the latch and the cable? I'd just like to get rid of it.

Here are the rear seats.

http://s107.photobucket.com/albums/m302/Sp...t=rearseats.jpg
post May 4, 2011 - 4:27 PM
+Quote Post
v1becelica



Enthusiast
*
Joined Sep 1, '10
From Toronto
Currently Offline

Reputation: 3 (100%)




would you happen to have a picture of the back side (trunk view) of the back panel for the seats?
post May 4, 2011 - 4:37 PM
+Quote Post
KAOS



Enthusiast
*****
Joined Apr 18, '06
From Calgary, Canada
Currently Offline

Reputation: 37 (100%)




QUOTE (spydercon @ May 4, 2011 - 9:59 AM) *
here is a picture of all the interior pieces

http://s107.photobucket.com/albums/m302/Sp...nt=interior.jpg

Random interior pieces (speakers, center arm rest, glove box, center console trim pieces, gauge cluster, ac controls) - $50 for all




I will take all the interior peices. PM'd you.

Thanks Matt!


--------------------
post May 4, 2011 - 6:35 PM
+Quote Post
hizzle369

Enthusiast
*
Joined Mar 25, '11
From Vancouver, WA
Currently Offline

Reputation: 0 (0%)




Will you be able to sell me the center trim; and the thing below the center trim that goes around the cigerrate lighter and manual shifter? and also the driver side control trim (windows, powerlocks trim) *NO ELECTRONICS for $20 plus ill pay for shipping?

I pm'd you also!

This post has been edited by hizzle369: May 4, 2011 - 6:41 PM
post May 4, 2011 - 8:50 PM
+Quote Post
Ryouxrs



Enthusiast
**
Joined Mar 26, '09
From Longmont, CO.
Currently Offline

Reputation: 0 (0%)




dibs on the 3s airbox! pm'd


--------------------
Lift Addict!! ^_^
----------------------
post May 5, 2011 - 1:05 AM
+Quote Post
block



Enthusiast
*****
Joined Jul 27, '06
From Soda
Currently Offline

Reputation: 9 (91%)




pictures of the hood latch cable? i "MIGHT" be interested pending if i could fix my damn one.


--------------------
post May 6, 2011 - 11:49 AM
+Quote Post
spydercon

Enthusiast

Joined Sep 20, '09
From Cambridge, Ontario
Currently Offline

Reputation: 1 (100%)




QUOTE (v1becelica @ May 4, 2011 - 5:27 PM) *
would you happen to have a picture of the back side (trunk view) of the back panel for the seats?


Ill try to get some tomorrow.


QUOTE (block @ May 5, 2011 - 2:05 AM) *
pictures of the hood latch cable? i "MIGHT" be interested pending if i could fix my damn one.



here is the latch and cable.

http://s107.photobucket.com/albums/m302/Sp...tchandcable.jpg
post May 6, 2011 - 11:04 PM
+Quote Post
KAOS



Enthusiast
*****
Joined Apr 18, '06
From Calgary, Canada
Currently Offline

Reputation: 37 (100%)






Thanks brother! Payment sent! biggrin.gif


--------------------
post May 10, 2011 - 7:48 AM
+Quote Post
spydercon

Enthusiast

Joined Sep 20, '09
From Cambridge, Ontario
Currently Offline

Reputation: 1 (100%)




Everything is obo! Make me an offer worst I can say is no.
post May 10, 2011 - 7:19 PM
+Quote Post
Ryouxrs



Enthusiast
**
Joined Mar 26, '09
From Longmont, CO.
Currently Offline

Reputation: 0 (0%)




have you been able to find the intake air temp sensor and bolts for the air box yet? still interested


--------------------
Lift Addict!! ^_^
----------------------
post May 10, 2011 - 9:37 PM
+Quote Post
94celigts



Enthusiast
**
Joined Jun 13, '07
From Whitby, ON, CAN
Currently Offline

Reputation: 6 (100%)




Im in Ontario, what condition is the car your taking this all out of, i need some body panels? front bumper, crashbar. headlights etc.
post May 11, 2011 - 12:05 AM
+Quote Post
v1becelica



Enthusiast
*
Joined Sep 1, '10
From Toronto
Currently Offline

Reputation: 3 (100%)




QUOTE (94celigts @ May 10, 2011 - 9:37 PM) *
Im in Ontario, what condition is the car your taking this all out of, i need some body panels? front bumper, crashbar. headlights etc.


I'm in Whitby and I've got a oem front bumper, crash bar up for sale. And possibly some headlights.
post May 11, 2011 - 6:31 AM
+Quote Post
qatar11

Enthusiast
****
Joined Aug 29, '02
From Lake Orion, MI
Currently Offline

Reputation: 6 (100%)




Dude your Inbox is full!


Hey... if your interior is black / gray, I am interested in the carpet, rear seats, sun visors, inside mirror, all the grey bits, f its has a moon roof, I am also interested in the head liner.


Let me know -


--------------------
-Mike
mjcoury@gmail.com
Team Reynolds Style
Celica Blog
Celica Wiki

It will take him a moment to realize that he's about to make a 180 degree turn at speed, but you will be ready for it. Brace for the g's, and fast heel-toe work.
post May 11, 2011 - 7:12 PM
+Quote Post
TRD_Ian



Enthusiast
***
Joined Aug 19, '08
From New Brunswick
Currently Offline

Reputation: 3 (100%)




hey matt its ian we talked this winter about me buying this car and bringing it back to new brunswick, i lost ur contact info and im still interested in those rotors and pads, did you sell the coil overs? pm me


--------------------

i hate snow, missing my celica
post May 12, 2011 - 7:19 AM
+Quote Post
spydercon

Enthusiast

Joined Sep 20, '09
From Cambridge, Ontario
Currently Offline

Reputation: 1 (100%)




QUOTE (TRD_Ian @ May 11, 2011 - 8:12 PM) *
hey matt its ian we talked this winter about me buying this car and bringing it back to new brunswick, i lost ur contact info and im still interested in those rotors and pads, did you sell the coil overs? pm me


Hey Ian, I still have the rotors for sale, unfortunately everything else is gone. If you would like them 50 dollars will take them.

Matt
post May 12, 2011 - 7:25 AM
+Quote Post
spydercon

Enthusiast

Joined Sep 20, '09
From Cambridge, Ontario
Currently Offline

Reputation: 1 (100%)




QUOTE (94celigts @ May 10, 2011 - 10:37 PM) *
Im in Ontario, what condition is the car your taking this all out of, i need some body panels? front bumper, crashbar. headlights etc.


The car was i good condition I no longer have it, but i do have the front and rear bumped and they are in good condition.

QUOTE (qatar11 @ May 11, 2011 - 7:31 AM) *
Dude your Inbox is full!


Hey... if your interior is black / gray, I am interested in the carpet, rear seats, sun visors, inside mirror, all the grey bits, f its has a moon roof, I am also interested in the head liner.


Let me know -


Hey man, the only parts a have left that you have listed is the rear seats. if your interested please let me know.
post May 14, 2011 - 12:54 AM
+Quote Post
Lilaznsifu

Enthusiast

Joined Mar 7, '10
From Cali
Currently Offline

Reputation: 0 (0%)




will the front bumper fit a 97 gt? also what color? pm pix please
post May 15, 2011 - 9:54 AM
+Quote Post
chris26

Enthusiast

Joined May 5, '11
From denver co
Currently Offline

Reputation: 0 (0%)




do you have the upper radiator support that has the hood latch on it?
post May 15, 2011 - 11:53 PM
+Quote Post
salv

Enthusiast
*
Joined Feb 9, '10
From Kitchener, Ontario
Currently Offline

Reputation: 2 (100%)




Hey man I'm the dude that came by to pick up the vent oil case in the white 205. Do you still have the air intake hose that connects from turbo to airbox?


--------------------
ST205 WRC
13.2 @103mph
post May 16, 2011 - 4:43 PM
+Quote Post
Darkchylde



Enthusiast
*
Joined Jan 11, '07
From carmel, new york
Currently Offline

Reputation: 7 (100%)




front seats to 10512, if they are the same as the rears.
post May 18, 2011 - 4:18 PM
+Quote Post
spydercon

Enthusiast

Joined Sep 20, '09
From Cambridge, Ontario
Currently Offline

Reputation: 1 (100%)




QUOTE (Lilaznsifu @ May 14, 2011 - 1:54 AM) *
will the front bumper fit a 97 gt? also what color? pm pix please


I am guessing it would. and its black. ill pm you a pic soon.

QUOTE (chris26 @ May 15, 2011 - 10:54 AM) *
do you have the upper radiator support that has the hood latch on it?


No its gone.

QUOTE (salv @ May 16, 2011 - 12:53 AM) *
Hey man I'm the dude that came by to pick up the vent oil case in the white 205. Do you still have the air intake hose that connects from turbo to airbox?


No sorry it has been sold.
post May 18, 2011 - 4:35 PM
+Quote Post
KAOS



Enthusiast
*****
Joined Apr 18, '06
From Calgary, Canada
Currently Offline

Reputation: 37 (100%)




Hey Matt - just wanted to let you know that I received all the parts in great condition!

Thanks again!


--------------------
post May 31, 2011 - 8:23 AM
+Quote Post
spydercon

Enthusiast

Joined Sep 20, '09
From Cambridge, Ontario
Currently Offline

Reputation: 1 (100%)




need everything gone, make me a reasonable offer and it will be yours!
post May 31, 2011 - 2:09 PM
+Quote Post
WHATxTHExTIFF

Enthusiast
*
Joined Feb 6, '11
From TORRANCE
Currently Offline

Reputation: 0 (0%)




Hey I'm interested in the ecu and harness how much shipped to Torrance ca?
post Jun 3, 2011 - 1:00 AM
+Quote Post
joehernandez



Enthusiast
****
Joined Aug 5, '06
From San Luis AZ
Currently Offline

Reputation: 4 (100%)




Hey. I'm interested on the rotors. All four. And the exhaust. Could I get some pictures please. Thanks man


--------------------
post Jun 4, 2011 - 12:17 AM
+Quote Post
lynxiesz



Enthusiast
*
Joined Feb 9, '09
From Toronto
Currently Offline

Reputation: 2 (100%)




Matt, do you have front passenger side cv joint?
post Jun 6, 2011 - 2:11 PM
+Quote Post
WHATxTHExTIFF

Enthusiast
*
Joined Feb 6, '11
From TORRANCE
Currently Offline

Reputation: 0 (0%)




Do you have 3sgte cam shafts for sale?
post Jun 6, 2011 - 2:15 PM
+Quote Post
boomer

Enthusiast
*
Joined Jan 26, '11
From ontario canada
Currently Offline

Reputation: 5 (100%)




QUOTE (spydercon @ May 4, 2011 - 10:11 AM) *
Unfortunately I ran out of money for my project so I decided to part it out. These are the parts I have left and i need to sell everything so everything is obo.

Buyer pays shipping.

Email for pictures please!


3SGTE ECU and harness ( harness is missing the clip for the fuel pump resistor pack, so the wires have been taped together and marked.) $125 for both or $65 each

3SGTE Ignitor and coil - $40

3SGTE Intake box and pipe - SOLD

GT front seats (good condition-cloth) - SOLD

Rear seats (good condition) - $30

2 sets of usdm taillights (good condition) - $20 each

side doors (black, good condition, everything works but i very slight bit of rust at the bottom) - SOLD

rear hatch (great condition everything works, black, no spoiler or interior pieces) $100

aluminum radiator with fans (trimmed to fit already and don't know make.) - SOLD

GT shifter and shifter cables - $40

Random interior pieces (speakers, center arm rest, glove box, center console trim pieces, gauge cluster, ac controls) - SOLD

hood latch and brand new cable - $30

3s pressure plate (good condition) - $50

5sfe greddy stage 2 clutch plate (like new great condition) - $75

Cross drilled front rotors and brand new rear rotors (never used) - $50

Power steering reservoir, windsheild washer reservoir (with pump), engine coolant reservoir - $ 30 for all

5sfe ecu - $40

Ebrake lever (good condition) - $15

Front and rear bumper (good condition, few scratches) - $50 for both

Exoticspeed titan t1 muffler 3" inlet 4" outlet, silencer included (bnib) and yonaka high flow cat 3" inlet and outlet - $225 for both

Im trying not to ship the doors and hatch because of their size, so i will be able to meet some where for you to pick them up.


Thanks, Matt



matt im interested in the rear seats could you pls give me a call in kitchener
778 3995 tks KEN

QUOTE (spydercon @ May 4, 2011 - 10:11 AM) *
Unfortunately I ran out of money for my project so I decided to part it out. These are the parts I have left and i need to sell everything so everything is obo.

Buyer pays shipping.

Email for pictures please!


3SGTE ECU and harness ( harness is missing the clip for the fuel pump resistor pack, so the wires have been taped together and marked.) $125 for both or $65 each

3SGTE Ignitor and coil - $40

3SGTE Intake box and pipe - SOLD

GT front seats (good condition-cloth) - SOLD

Rear seats (good condition) - $30

2 sets of usdm taillights (good condition) - $20 each

side doors (black, good condition, everything works but i very slight bit of rust at the bottom) - SOLD

rear hatch (great condition everything works, black, no spoiler or interior pieces) $100

aluminum radiator with fans (trimmed to fit already and don't know make.) - SOLD

GT shifter and shifter cables - $40

Random interior pieces (speakers, center arm rest, glove box, center console trim pieces, gauge cluster, ac controls) - SOLD

hood latch and brand new cable - $30

3s pressure plate (good condition) - $50

5sfe greddy stage 2 clutch plate (like new great condition) - $75

Cross drilled front rotors and brand new rear rotors (never used) - $50

Power steering reservoir, windsheild washer reservoir (with pump), engine coolant reservoir - $ 30 for all

5sfe ecu - $40

Ebrake lever (good condition) - $15

Front and rear bumper (good condition, few scratches) - $50 for both

Exoticspeed titan t1 muffler 3" inlet 4" outlet, silencer included (bnib) and yonaka high flow cat 3" inlet and outlet - $225 for both

Im trying not to ship the doors and hatch because of their size, so i will be able to meet some where for you to pick them up.


Thanks, Matt



matt im interested in the rear seats could you pls give me a call in kitchener
778 3995 tks KEN
post Jun 7, 2011 - 8:49 AM
+Quote Post
spydercon

Enthusiast

Joined Sep 20, '09
From Cambridge, Ontario
Currently Offline

Reputation: 1 (100%)




QUOTE (Darkchylde @ May 16, 2011 - 5:43 PM) *
front seats to 10512, if they are the same as the rears.

Sorry the front seats are sold.

QUOTE (WHATxTHExTIFF @ Jun 6, 2011 - 3:11 PM) *
Do you have 3sgte cam shafts for sale?


I do still have the engine but I would like to sell it as a whole.
post Jun 9, 2011 - 5:44 PM
+Quote Post
Dangercart1

Enthusiast
*
Joined Dec 8, '09
Currently Offline

Reputation: 0 (0%)




PM'd
post Jun 10, 2011 - 4:12 AM
+Quote Post
match220



Enthusiast
***
Joined May 13, '06
From Kaimuki, HI
Currently Offline

Reputation: 10 (100%)




what gen is this? Gen II or Gen III? If it's gen III and you end up parting out the engine, I need some stuff.


--------------------
-Jay

95 GT conv. project car: Manual, Gen III 3sgte, JN pisons, Eagle rods, overbore, crank knife-edged, crank scraper, ARP head/main/flywheel, Autronic EMS, Haltech Dual Wideband O2 controller, Audi 1.8T individual coils, FMIC and SSQV BOV, 3" downpipe, 3" ultra-high-flow cat, 2.5" Borla muffler, +other
01 S2000: FMIC, Haltech EMS, Haltech wideband, 570cc inj, forged pistons/rods, sleeved block, 5 angle valve job, ported and polished
02 R6, all stock, except for braided stainless brake lines, frame sliders, and adjustable brake/clutch leve
post Jun 10, 2011 - 8:53 AM
+Quote Post
spydercon

Enthusiast

Joined Sep 20, '09
From Cambridge, Ontario
Currently Offline

Reputation: 1 (100%)




its a gen 3 and currently i do have a buyer but I will let you know if it falls through.
post Jun 10, 2011 - 1:43 PM
+Quote Post
match220



Enthusiast
***
Joined May 13, '06
From Kaimuki, HI
Currently Offline

Reputation: 10 (100%)




QUOTE (spydercon @ Jun 10, 2011 - 3:53 AM) *
its a gen 3 and currently i do have a buyer but I will let you know if it falls through.


k, the parts I need are things that you would be stuck with after a part out anyway, so you would probably sell most of it if you did part it out. Let me know, thanks.


--------------------
-Jay

95 GT conv. project car: Manual, Gen III 3sgte, JN pisons, Eagle rods, overbore, crank knife-edged, crank scraper, ARP head/main/flywheel, Autronic EMS, Haltech Dual Wideband O2 controller, Audi 1.8T individual coils, FMIC and SSQV BOV, 3" downpipe, 3" ultra-high-flow cat, 2.5" Borla muffler, +other
01 S2000: FMIC, Haltech EMS, Haltech wideband, 570cc inj, forged pistons/rods, sleeved block, 5 angle valve job, ported and polished
02 R6, all stock, except for braided stainless brake lines, frame sliders, and adjustable brake/clutch leve

2 Pages V   1 2 >
Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: August 18th, 2025 - 9:16 AM