FS: Hatch Part-out!!!!, Come and get what you need Options

[96stgreendemon]

Ok, This has been updated as of June 4th
-Invader rear bumper (actually in good shape) - $50, i will not ship this come pick it up

-OEM hatch rear bumper - Make offer

-C-One replica fiberglass front bumper (taken some abuse, but for right price will fix and make sure it fits without issue) - $50, yes it needs work, will not ship, will sell this and invader style rear for $75

-Newer A/C compressor - 40+ shipping

-Newer 5sfe clutch and pressure plate- $50 + shipping
-flywheel - $20 + shipping

-Hatch with glass, for right price may come with 2 post also - $100, will not ship

-Rando 5sfe parts - offer

-pumps lines etc

-ABS Main Unit - 20+ shipping

-Brake fluid container - $20+shipping

-Proportioning valve - 20+shipping

-Power steering container - 15+shipping

-5sfe starter - 20+shipping

-5sfe oem header - 30+shipping

-USDM hatch tails - 40+shipping



-5sfe polished valve cover- First 50+Shipping takes it


-5sfe polished intake manifold *50+shipping

-water outlet - 10+shipping


-5Sfe cams, $30+shipping

-

-5sfe header heat shield - 20+shipping

-Upper timing cover, interior and exterior 20+shipping



-5sfe Throttle body - 20+shipping

-GT brake proportioning valve

-






-5sfe M/T ECU

-Hatch weatherstrip







White hatch


Just make me an offer on this stuff, i would really like to get it out of my garage so i can make room for this clip, no reasonable offer turned away

But really, make me an offer i really need the space for this clip by next week, alot of this will go to the junkyard if not sold








Im sure i have more than this, just what i can remember off the top of my head, shoot me a pm if there is something your interested in! and dont be afraid to give me an offer, im more than reasonable, also willing to trade parts + cash for 3rd gen 3sgte parts

This post has been edited by 96stgreendemon: Jun 4, 2011 - 9:20 PM

[playr158]

Can you pm me a picture of the c1 bumper and what about from control arms?

This post has been edited by playr158: May 16, 2011 - 8:19 AM

[perkyshadow]

Hey man! I tried to send you a message, but it wouldn't let me!

Here's a few parts that I really need:

1. Shifter surround for a manual. (plastic part)
2. Plastic under the engine with screws and clips.
3. Tweeter covers

If you've got any, just let me know what you need to get with shipping included to 2035 Pine St, West Columbia, SC 29170. There's a nearby Greyhound station in Columbia, SC if that's cheaper! Thanks man!

Jason

[senick]

Would the shifter cables off this work with an AT200? And let's see...clutch pedal assembly and lines? Those might be a pain to get out though, if so I understand.

[Por2geezcelica]

Your not accepting any pms for some reason. I need a passenger side high beam if you have one

[HectortheRican]

I tried to message you, but it says your messaging is disabled? I dunno... but this was the message.

If it's a manual, could you send me this little clip? I remember telling you about the troubles it gave me while installing the SS.

[SoDo]

Do you have the plastic clips that hold the privacy hatch cover?

[TheChildOfTheSea]

Send me a picture of the COne bumper

[96stgreendemon]

C one bumper is cracked in a few places will upload pics tomorrow, control arms are done, no plastics, most interior parts are gone

[JasonTX]

looking for the pass. side hinge for the hatch privacy cover

[96stgreendemon]

Sorry almost no interior plastics

[JasonTX]

what about the rear 1/4 windows if the moulding is in good shape

[96stgreendemon]

No, dont have the molding

[richee3]

Do you have essentially the whole car or basically just what is listed? There are some parts I'd love to have and I could come pick them up so you wouldn't have to deal with shipping.

This post has been edited by richee3: May 17, 2011 - 4:25 PM

[TheChildOfTheSea]

Still waiting for the COne pics bro

[96stgreendemon]

Richee3 PM me what parts you need, pulled just about everything out of the car that was left on it and then it went to the salvage yard today but i do have alot of parts taking up space
and teh bumper is not a C-One as far as i know, i believe it may be just a cheap o reproduction, going to try and have pics up tomorrow

[96stgreendemon]

Bump, update for pics

[95celicastLSR]

Do you have a left front wheel Spindle?

[96stgreendemon]

I do have the left front spindle, let me take a look at it and make sure it is good though, car took a hit to a tree

[jimmykay]

bumpity bump.

interested in the white hatch

[boomer]

So after pulling the parts i need for the car instead of just taking it straight to the crusher i figure some of you may want these parts, and here is so far what i have for sale off the car, if you need something else shoot me a pm and i will see what i can do, but there are almost no interior panel. THIS IS NOT THE GREEN CELICA, THIS IS A PARTS CAR
-Invader rear bumper (actually in good shape) - $60+ shipping OBO
-OEM hatch rear bumper - Make offer
-C-One replica fiberglass front bumper (taken some abuse, but for right price will fix and make sure it fits without issue) - Make offer
-Newer A/C compressor - $80 + shipping
-Newer 5sfe clutch- $80 + shipping
-flywheel - make offer
-Passenger side door/window - make offer
-Hatch with glass, for right price may come with 2 post also - make offer
-Rando 5sfe parts - offer
-pumps lines etc
-ABS control system and lines - $150 + shipping
-Brake fluid container
-Proportioning valve
-Power steering container
-5sfe starter
-5sfe oem header

-5sfe polished valve cover

-5sfe polished intake manifold
-water outlet
-water pump
-oil pump

-5Sfe cams, make offer

-5sfe fuel rail make offer

-5sfe header heat shield

-Upper timing cover, interior and exterior

-Rear ABS Hub and bearing

-5sfe Throttle body

-GT brake proportioning valve

-5sfe starter

-5sfe brake fluid container

-Abs control unit


-5sfe M/T ECU

-Hatch weatherstrip



Veliside wannabe bumper

Trashed c one replica bumper

White hatch











Im sure i have more than this, just what i can remember off the top of my head, shoot me a pm if there is something your interested in! and dont be afraid to give me an offer, im more than reasonable, also willing to trade parts + cash for 3rd gen 3sgte parts

could you get me a price to kitchener ontario canada n2h2j4, for the valve cover

So after pulling the parts i need for the car instead of just taking it straight to the crusher i figure some of you may want these parts, and here is so far what i have for sale off the car, if you need something else shoot me a pm and i will see what i can do, but there are almost no interior panel. THIS IS NOT THE GREEN CELICA, THIS IS A PARTS CAR
-Invader rear bumper (actually in good shape) - $60+ shipping OBO
-OEM hatch rear bumper - Make offer
-C-One replica fiberglass front bumper (taken some abuse, but for right price will fix and make sure it fits without issue) - Make offer
-Newer A/C compressor - $80 + shipping
-Newer 5sfe clutch- $80 + shipping
-flywheel - make offer
-Passenger side door/window - make offer
-Hatch with glass, for right price may come with 2 post also - make offer
-Rando 5sfe parts - offer
-pumps lines etc
-ABS control system and lines - $150 + shipping
-Brake fluid container
-Proportioning valve
-Power steering container
-5sfe starter
-5sfe oem header

-5sfe polished valve cover

-5sfe polished intake manifold
-water outlet
-water pump
-oil pump

-5Sfe cams, make offer

-5sfe fuel rail make offer

-5sfe header heat shield

-Upper timing cover, interior and exterior

-Rear ABS Hub and bearing

-5sfe Throttle body

-GT brake proportioning valve

-5sfe starter

-5sfe brake fluid container

-Abs control unit


-5sfe M/T ECU

-Hatch weatherstrip



Veliside wannabe bumper

Trashed c one replica bumper

White hatch











Im sure i have more than this, just what i can remember off the top of my head, shoot me a pm if there is something your interested in! and dont be afraid to give me an offer, im more than reasonable, also willing to trade parts + cash for 3rd gen 3sgte parts

could you get me a price to kitchener ontario canada n2h2j4, for the valve cover

[96stgreendemon]

let me see the size and weight and i should know by later tonight

[Black0nBlack94]

Hi, Wats the price on Both Rear ABS bearing hub Assemblies, and IF you still have it, the Heat/AC Controls. PM'ed You

This post has been edited by Black0nBlack94: May 20, 2011 - 6:26 PM

[brenton1919]

do u have a gud speed sensor pm if u do

[96stgreendemon]

Not sure on the speed sensor, but i will go check tomorrow

[96stgreendemon]

Late night bump, motor is torn down and have all parts for that also!

[96stgreendemon]

BUMP
Hood latch sold!

[96stgreendemon]

Bump, someone buy some parts!!! i have a clip to finance

[TheChildOfTheSea]

wow the bumper really got abused lol...it litteraly got raped!

[96stgreendemon]

Yeah the bumper has seen better days, which is why it will go cheap, someone make me an offer!

[96stgreendemon]

Bump ABS hubs sold

[96stgreendemon]

Bump it on up!

[96stgreendemon]

Payday Bump! Have lots of parts, brackets, flywheel you name it!
- Also have a newer clutch for it, 50 shipped and its yours with pressure plate

[jordisonjr]

Im looking for the rubber pieces that go inbetween the strut and spring, at the bottom of the spring.
I need them from the front passenger and driver side, if they are in good shape.
Let me know if you still have them, thanks.

[96stgreendemon]

Im looking for the rubber pieces that go inbetween the strut and spring, at the bottom of the spring.
I need them from the front passenger and driver side, if they are in good shape.
Let me know if you still have them, thanks.

The struts were all but torn off of the car, do not have them sorry

And Bump for the intercooler $80 shipped takes it

[jordisonjr]

Alright, thanks for the reply.

[Badkarma]

i need the Radiator fan on the passenger side. and also the relay that goes to that one. its the one in the "Fan no 2" spot. i just need the motor itself, but if you dont want to take it apart, ill take the motor, fan blades, and shroud.

Thanks. let me know how much you want for it.

Erich

This post has been edited by Badkarma: May 28, 2011 - 1:43 PM

[96stgreendemon]

Radiator was smashed in the wreck and so were the fans

[NateKristan]

I absolutley love the green demon... Same color as mine but i think mine looks a litlle more demonic. Missing front bumper and both fenders r beat to f**k. I wouldnt mind putting that beat up up bumper on it. What will u take for it the way it sits?

[96stgreendemon]

Come Pick it up and i will take 50 bucks for it, for 100 you can have that and the rear bumper picked up

[96stgreendemon]

Bump
also have sidemarkers and USDM taillights that i would like to get rid of, give me an offer people

[NWCelica]

Pm'ed

[96stgreendemon]

Bump
Rear hubs
Fuel Rail
and ECU have all been sold
Everything else is still available

[96stgreendemon]

Can I get a bump!
ST header, intake, and cat delete will also be for sale in a couple weeks, along with a canster style muffler

[SupraKid]

Kyle do you have the pocket below the radio? And if so how much.

[96stgreendemon]

I will have the one out of my car in a couple weeks, you have PM

[96stgreendemon]

Bump, thread reorganized, update in first post, get this crap out of my garage

[jordisonjr]

Do you have the hatch cargo cover?

[sunwukongg]

Ok, This has been updated as of June 4th

-5sfe oem header - 30+shipping

how much shipped to 92844? and can you post a picture of it asap for me too? because i previously bought a 5sfe header that i thought would work for my celica but it didnt..it was a strange half of a header thing and it didnt look like my old stock header..thanks!

[96stgreendemon]

I dont have a picture of it handy, i wont have one for about another week. and wont know about shipping till then either

[MrParker]

I'd like to get your sidemarkers with the light connectors. Please let me know how much it would cost to ship to Montreal, Qc.

[808celica]

Nice X's on the high beams I wonder where you got that idea from.

Yo, how much for the rear hubs? you know if we can knock off the abs ring? Car's non-abs but so far i have found anything on island for me. LMK shipping cost to 96731, howz $75 for the 2 units???


This post has been edited by 808celica: Jun 28, 2011 - 1:37 PM

[96stgreendemon]

The rear hubs have already been sold, i do however still have the front hubs

[sunwukongg]

I dont have a picture of it handy, i wont have one for about another week. and wont know about shipping till then either

alright just keep me updated! ill check every now and then. thanks man.

[96stgreendemon]

^^ yeah i will keep you updated on it, i have it in the garage at my house taking up room lol



This post has been edited by 96stgreendemon: Jun 29, 2011 - 9:16 AM

[808celica]

I wouldnt mind another set of from hubs my car tends to eat them like hot cakes

[96stgreendemon]

lol i cant imagine why, hell i think ive got a wheel bearing going out l