 FS: Part out of 1994 GT coupe, EDIT:Not much good on this car-just seeing if there is anything usable |
  |
 Aug 8, 2011 - 4:16 PM
|
 
|
 Enthusiast  Joined May 3, '11 From Ohio Currently Offline Reputation: 8 (100%)  |
Ok guys, this was a 400$ car that I bought to fix mine. It only cost 400 cause the car was a piece of crap. This youtube video should explain just about everything and you can see for yourself how rough it is. The front bumper which was not shown has a broken bottom on it with good stock turns. Front quarters are also pretty rough but would be pick up only. Location, Marietta OH. I don't expect a lot out of this sale but thought I might be able to help someone out.
Thanks! Edit: also have the door panels, they were in the trunk in the video, From my recollection they are in used but serviceable shape. Not bad given the condition of the rest of the car. EDIT: - Have the door mirrors as well in good shape, paint is slightly faded but some polish could fix that. I have a video of the engine bay coming and a video with most of the plastic involved in it as well. engine bay - Engine bay vid http://www.youtube.com/watch?v=G3N-mCg1yEU EDIT - Video of the plastic Interior Plastic This post has been edited by ricochet1490: Aug 14, 2011 - 8:57 PM --------------------  |
|
Aug 8, 2011 - 5:33 PM
|
|
|
Enthusiast Joined May 3, '11 From Ohio Currently Offline Reputation: 8 (100%) |
trunk liner/tire cover are called for - as is the good drivers headlight
Anyone else wanting those is second in line. -------------------- |
|
Aug 8, 2011 - 7:53 PM
|
|
|
Enthusiast Joined May 3, '11 From Ohio Currently Offline Reputation: 8 (100%) |
oh - possible drivers side window regulator spoken for as well.
-------------------- |
|
Aug 9, 2011 - 12:19 PM
|
|
|
Enthusiast Joined Jul 17, '11 From Spain Currently Offline Reputation: 0 (0%) |
Pm sent!
|
|
Aug 13, 2011 - 1:08 PM
|
|
|
Enthusiast Joined May 3, '11 From Ohio Currently Offline Reputation: 8 (100%) |
requested pics
    This post has been edited by ricochet1490: Aug 13, 2011 - 4:01 PM -------------------- |
|
Aug 14, 2011 - 9:52 AM
|
|
|
Enthusiast Joined Mar 10, '07 From Titusville, Florida Currently Offline Reputation: 9 (100%) |
How many miles are on the car?
|
|
Aug 14, 2011 - 8:05 PM
|
|
|
Enthusiast Joined May 3, '11 From Ohio Currently Offline Reputation: 8 (100%) |
192xxx i believe
-------------------- |
|
Aug 15, 2011 - 8:56 AM
|
|
 Enthusiast Joined Jan 11, '07 From Fort Lauderdale, FL Currently Offline Reputation: 0 (0%) |
condition of the horizontal rubber moldings (the ones that keep the water out) on the outside of the doors?
-------------------- |
|
Aug 15, 2011 - 10:27 AM
|
|
 Enthusiast Joined Jun 21, '03 From Pennsylvania Currently Offline Reputation: 3 (100%) |
Pm sent
--------------------  |
|
Aug 15, 2011 - 11:56 AM
|
|
 Enthusiast Joined May 31, '11 From Rochester, NY Currently Offline Reputation: 5 (100%) |
Do you still have the driver side tweeter cover? I need one. Mine cracked
-------------------- 1994 Toyota Celica GT-S 5S-FE 190k Miles. Project car 1992 Toyota Celica GT 5S-FE 170k Miles. Daily driver/beater 1999 Toyota Camry LE 5S-FE 216K Miles. RIP You will be missed.  *ASE Certified General Manager |
|
Aug 15, 2011 - 2:57 PM
|
|
|
Enthusiast Joined Dec 29, '05 From So-Cal Currently Offline Reputation: 12 (100%) |
driver and passenger side mirror switch assembly with the plates...unit and all 93727?
|
|
Aug 15, 2011 - 4:35 PM
|
|
|
Enthusiast Joined May 3, '11 From Ohio Currently Offline Reputation: 8 (100%) |
QUOTE (gabyz @ Aug 15, 2011 - 8:56 AM)  condition of the horizontal rubber moldings (the ones that keep the water out) on the outside of the doors? Should be decent I think. The video doesn't show much I don't think. I can only get to the car on weekends as I am currently 3 hours away from it, but I think they're fine from memory. Send me a pm if still interested. QUOTE (RabidTRD @ Aug 15, 2011 - 11:56 AM) Do you still have the driver side tweeter cover? I need one. Mine cracked Yes, as per the video the tweeter covers exist. PM me an offer QUOTE (chacha @ Aug 15, 2011 - 2:57 PM) driver and passenger side mirror switch assembly with the plates...unit and all 93727? pm'd -------------------- |
|
Aug 16, 2011 - 7:49 PM
|
|
|
Enthusiast Joined Apr 9, '10 From raleigh n.c. Currently Offline Reputation: 1 (100%) |
i am interested in both head lights and both tweeter covers if u still have them
|
|
Aug 16, 2011 - 8:39 PM
|
|
|
Enthusiast Joined May 3, '11 From Ohio Currently Offline Reputation: 8 (100%) |
QUOTE (stwin2 @ Aug 16, 2011 - 8:49 PM) i am interested in both head lights and both tweeter covers if u still have them drivers headlight gone, passenger still around, but tab is broken on top if you watch video. You are third in line for tweeter covers. -------------------- |
|
Aug 16, 2011 - 9:37 PM
|
|
|
Enthusiast Joined Aug 2, '06 From bay area Currently Offline Reputation: 21 (100%) |
by chance is there a cat on the bottom of the car??
|
|
Aug 16, 2011 - 9:50 PM
|
|
|
Enthusiast Joined May 3, '11 From Ohio Currently Offline Reputation: 8 (100%) |
QUOTE (azn87 @ Aug 16, 2011 - 9:37 PM) by chance is there a cat on the bottom of the car?? As far as I know there SHOULD be. I can confirm this weekend like I must do with all my parts. If I dirt raced this thing the cat would come off anyway. If interested you have dibs. -------------------- |
|
Aug 17, 2011 - 6:28 PM
|
|
 Enthusiast Joined Dec 1, '04 From Pittsburgh, PA Currently Offline Reputation: 1 (100%) |
the whole rear hub assembly on both sides any good. Brakes, e-brake, hub itself from a lot of rust
--------------------  |
|
Aug 17, 2011 - 6:43 PM
|
|
|
Enthusiast Joined May 3, '11 From Ohio Currently Offline Reputation: 8 (100%) |
QUOTE (robdrummer @ Aug 17, 2011 - 7:28 PM) the whole rear hub assembly on both sides any good. Brakes, e-brake, hub itself from a lot of rust not really. I know the ebrake is broken and the bearings make noise. I think one of the calipers is stuck. Not in good enough shape for me to price out and sh*t as heavy as it is -------------------- |
|
Aug 19, 2011 - 9:45 PM
|
|
|
Enthusiast Joined May 3, '11 From Ohio Currently Offline Reputation: 8 (100%) |
here are some of the requested pics...
          -------------------- |
|
Aug 20, 2011 - 12:42 PM
|
|
|
Enthusiast Joined May 3, '11 From Ohio Currently Offline Reputation: 8 (100%) |
requested pics of interest.
    -------------------- |
|
Aug 22, 2011 - 10:04 PM
|
|
|
Enthusiast Joined May 3, '11 From Ohio Currently Offline Reputation: 8 (100%) |
bump: Pics are up for those guys who pmd me about parts. I think all PM's have been replied to. If not, hit me up
-------------------- |
|
Aug 31, 2011 - 8:35 PM
|
|
|
Enthusiast Joined May 3, '11 From Ohio Currently Offline Reputation: 8 (100%) |
Bump it up. Switches still available among other things. Let me know.
-------------------- |
|
Sep 6, 2011 - 10:29 PM
|
|
|
Enthusiast Joined Sep 6, '11 From colorado Currently Offline Reputation: 0 (0%) |
do you still have this car? i need alot of goodies and it sounds like you have what i need! tightrides_85@yahoo.com
|
|
Sep 6, 2011 - 10:32 PM
|
|
|
Enthusiast Joined May 3, '11 From Ohio Currently Offline Reputation: 8 (100%) |
QUOTE (283celica25thann @ Sep 6, 2011 - 10:29 PM) do you still have this car? i need alot of goodies and it sounds like you have what i need! tightrides_85@yahoo.com yeah I still have it. It's gonna get dirt raced, then fully parted with heavy stuff for sale that I currently need to keep it a rolling self driving chassis. What do you need? mechanical things required for moving the vehicle I can't do.... at least not right now.... like I said, but hit me up. -------------------- |
|
Nov 11, 2011 - 9:46 PM
|
|
 Enthusiast Joined Aug 12, '09 From Orange Beach, Alabama Currently Offline Reputation: 6 (100%) |
Hey, do you still have the tweeters and covers, rear speaker brackets, and shift bezzle with cubbie hole and lighter? If so how much shipped to 36561?
This post has been edited by ChfNix: Nov 11, 2011 - 10:01 PM -------------------- Failing to prepare is preparing to fail!
|
|
Nov 30, 2011 - 3:17 AM
|
|
|
Enthusiast Joined Oct 28, '08 From CT Currently Offline Reputation: 0 (0%) |
Rear calipers and rear struts?
-------------------- 96 Celica gt 5 spd 218k intake, header, rear strutbar, new clutch...again :/
02 Saab 9-5 silver Aero 5 speed 150k w/ 80k mile engine, new clutch, k&n intake, turbos xs bov 92 sandstone grey 3000gt vr4 upgraded turbos, turboback exhaust, intake, mbc, walbro 91 black 3000gt vr4 needs work stock turbos |
|
Nov 30, 2011 - 10:43 AM
|
|
|
Enthusiast Joined May 3, '11 From Ohio Currently Offline Reputation: 8 (100%) |
Car needs to remain a roller with all brakes and drivetrain staying intact. Some other requested parts I'm looking into pulling off my shell because I won't need them after the RHD conversion is done.... but again, brakes calipers and struts are all needed AT THE MOMENT
Chfnix - been meaning to get back to you on that shifter bezel.... as mentioned, I FORGOT i now had two.... you'll have pics before the end of the week of both of them if I can remember and you still need them. -------------------- |
|
Dec 4, 2011 - 11:29 PM
|
|
|
Enthusiast Joined Oct 28, '08 From CT Currently Offline Reputation: 0 (0%) |
nvmnd
This post has been edited by Robbie1902: Dec 4, 2011 - 11:30 PM -------------------- 96 Celica gt 5 spd 218k intake, header, rear strutbar, new clutch...again :/
02 Saab 9-5 silver Aero 5 speed 150k w/ 80k mile engine, new clutch, k&n intake, turbos xs bov 92 sandstone grey 3000gt vr4 upgraded turbos, turboback exhaust, intake, mbc, walbro 91 black 3000gt vr4 needs work stock turbos |
|
Dec 5, 2011 - 3:07 PM
|
|
 Enthusiast Joined Sep 22, '11 From midstate michigan Currently Offline Reputation: 0 (0%) |
Still have anything left? did you sell the bumper cover?, also looking for rt low beam and lft high beam.
Thanks |
|
Dec 5, 2011 - 6:18 PM
|
|
|
Enthusiast Joined May 3, '11 From Ohio Currently Offline Reputation: 8 (100%) |
QUOTE (michlowrider @ Dec 5, 2011 - 3:07 PM) Still have anything left? did you sell the bumper cover?, also looking for rt low beam and lft high beam. Thanks I'll have to check on the headlights... I cant remember which ones have tabs broken and which ones don't. As far as the bumper cover is concerned.... front or rear? Also, front is in pretty terrible shape. The rear has some scratches. -------------------- |
|
Dec 7, 2011 - 4:58 PM
|
|
 Enthusiast Joined Nov 21, '05 From Tacoma, WA Currently Offline Reputation: 7 (100%) |
I need new timing belt covers if you can let those go, both the top and the bottom with the seals. Mine still kinda work but got chewed up when my motor mount broke. I'm missing the top cover seal too. I can send you mine if you are going to keep running the engine, they'd work good enough while you trash whats left of the car.
|
|
Dec 7, 2011 - 5:37 PM
|
|
 Enthusiast Joined Aug 15, '10 From The Best Coast Currently Offline Reputation: 12 (100%) |
Just FYI you can sell the rear brakes, and just keep the spindles(ST and GT are interchangeable) so the car can still roll. But you wont have any brakes or ebrake.
|
|
Dec 7, 2011 - 6:08 PM
|
|
|
Enthusiast Joined May 3, '11 From Ohio Currently Offline Reputation: 8 (100%) |
QUOTE (SupraKid @ Dec 7, 2011 - 6:37 PM) Just FYI you can sell the rear brakes, and just keep the spindles(ST and GT are interchangeable) so the car can still roll. But you wont have any brakes or ebrake. If any of you have read anything from Turnip on this forum.... I'm going to be doing what he's doing - dirt track racing. SO.... that means i need all my rolling equipment and STOPPING equipment as well. Thank you though -------------------- |
|
Dec 8, 2011 - 10:15 AM
|
|
|
Enthusiast Joined Feb 4, '10 From Kingsport, Tn Currently Offline Reputation: 0 (0%) |
How much for the drivers window switch shipped to 37604 and does it work?
|
|
Dec 8, 2011 - 10:45 AM
|
|
|
Enthusiast Joined May 3, '11 From Ohio Currently Offline Reputation: 8 (100%) |
QUOTE (bradshaw75 @ Dec 8, 2011 - 10:15 AM) How much for the drivers window switch shipped to 37604 and does it work? 10$ for the switch plus shipping? and yeah it works -------------------- |
|
Dec 10, 2011 - 8:17 PM
|
|
|
Enthusiast Joined Nov 18, '10 From Jersey City, NJ Currently Offline Reputation: 0 (0%) |
QUOTE (ricochet1490 @ Dec 8, 2011 - 10:45 AM) QUOTE (bradshaw75 @ Dec 8, 2011 - 10:15 AM) How much for the drivers window switch shipped to 37604 and does it work? 10$ for the switch plus shipping? and yeah it works driver side tail light? how about the mirror switch? This post has been edited by Chockomon: Dec 10, 2011 - 8:18 PM |
|
Dec 10, 2011 - 8:20 PM
|
|
|
Enthusiast Joined May 3, '11 From Ohio Currently Offline Reputation: 8 (100%) |
drivers side switch still available. - AND BTW- its the whole assembly, plate, switches for windows and mirrors.
Chockomon, you are second in line for the driver side tail. It is in good shape too. -------------------- |
|
Dec 12, 2011 - 3:28 PM
|
|
|
Enthusiast Joined Nov 18, '10 From Jersey City, NJ Currently Offline Reputation: 0 (0%) |
QUOTE (ricochet1490 @ Dec 10, 2011 - 8:20 PM) drivers side switch still available. - AND BTW- its the whole assembly, plate, switches for windows and mirrors. Chockomon, you are second in line for the driver side tail. It is in good shape too. how much? pm me 
|
|
Jan 24, 2012 - 2:07 PM
|
|
|
Enthusiast Joined Sep 28, '09 From Washington, MO Currently Offline Reputation: 0 (0%) |
you kinda skipped over the engine... is the engine any good? how much for the engine if it's any good?
|
|
Jan 24, 2012 - 3:39 PM
|
|
|
Enthusiast Joined May 3, '11 From Ohio Currently Offline Reputation: 8 (100%) |
i never considered selling the engine because of the shipping hassle - it's got a 192k on it if I remember correctly. But I wouldn't know too much really. I bought it, drove it on the trailer. took it to my garage. drove it off the trailer at my garage. Drove it in an out the garage a few times, and it's been parked ever since. it ran then, but that's all I know really. I had to steal the distributor from it for my car, I have another one for it, but never installed it fully. It ran last I checked, but it's a rusty engine bay.... much like the rest of the car....
I also have a another 5s sitting on a pallet that has 167k on it. auto tranny blew and I bought it from richee3 when I picked up my shell. It ran fine when he had it for those few weeks. Purred like a kitten. But again, I've never ran it. However, I'd really have to be persuaded to take the time to box up and sell EITHER of them because it's a JOB to do that. With college always breathing down my neck 24/7, i have zero motivation to ship one at the moment.... -------------------- |
|
Jan 24, 2012 - 10:02 PM
|
|
 Enthusiast Joined Dec 22, '11 From California Currently Offline Reputation: 2 (100%) |
Hey, do you have the two covers for the license plate light? If you do please let me know the cost + shipping to CA (94087). Thanks!
|
|
Jan 25, 2012 - 12:03 AM
|
|
|
Enthusiast Joined May 3, '11 From Ohio Currently Offline Reputation: 8 (100%) |
QUOTE (Jokester @ Jan 24, 2012 - 11:02 PM) Hey, do you have the two covers for the license plate light? If you do please let me know the cost + shipping to CA (94087). Thanks! Maybe, I don't know what you're talking about though. is it connected to the late bezel? -------------------- |
|
Jan 25, 2012 - 12:08 AM
|
|
 Enthusiast Joined Aug 23, '11 From kenton ohio Currently Offline Reputation: 14 (100%) |
Think hes talking about the clear lenses that go over the rear tag lights
Do you got a extra trim part that goes around the radio an air controls -------------------- 95 gt coupe, v6 swap weekend toy
99 gt hatch beams swapped wife's 94 st hatch my daily driver http://www.6gc.net/forums/index.php?showtopic=82235  n |
|
Jan 25, 2012 - 12:23 AM
|
|
|
Enthusiast Joined Dec 22, '11 From California Currently Offline Reputation: 2 (100%) |
Yea Kurt is right. So theres the license plate. And then above that are two light bulbs. Its the two clear plastic covers that go over the two light bulb. Each one is attached by two phillip screws. If you still have trouble seeing it, I can send a pic.
|
|
Jan 25, 2012 - 1:12 AM
|
|
|
Enthusiast Joined May 3, '11 From Ohio Currently Offline Reputation: 8 (100%) |
I'm sure I have it then, I just don't have it with me. It's at my parents house currently. This of course means nothing until the weekend at the earliest.
Kurt - Yeah I have some extra radio bezel trim. Why? yours messsed? -------------------- |
|
Jan 25, 2012 - 1:55 PM
|
|
|
Enthusiast Joined Aug 23, '11 From kenton ohio Currently Offline Reputation: 14 (100%) |
The one in the yellow hatch has a crack in the bottom an a hole drilled into it. So looking to replace that an the front bumper lol
The one in the yellow hatch has a crack in the bottom an a hole drilled into it. So looking to replace that an the front bumper lol -------------------- 95 gt coupe, v6 swap weekend toy
99 gt hatch beams swapped wife's 94 st hatch my daily driver http://www.6gc.net/forums/index.php?showtopic=82235 n |
|
Jan 25, 2012 - 5:57 PM
|
|
|
Enthusiast Joined Aug 23, '11 From kenton ohio Currently Offline Reputation: 14 (100%) |
Yea i got a short parts list i need
Looking for front seats hood front bumper an pass side tail light Maybe more later on -------------------- 95 gt coupe, v6 swap weekend toy
99 gt hatch beams swapped wife's 94 st hatch my daily driver http://www.6gc.net/forums/index.php?showtopic=82235 n |
|
Jan 25, 2012 - 6:46 PM
|
|
|
Enthusiast Joined May 3, '11 From Ohio Currently Offline Reputation: 8 (100%) |
it'll be this weekend before I'll be able to get you pics of anything.
-------------------- |
|
Jan 25, 2012 - 6:52 PM
|
|
|
Enthusiast Joined Aug 23, '11 From kenton ohio Currently Offline Reputation: 14 (100%) |
Ok just sent them to my phine
-------------------- 95 gt coupe, v6 swap weekend toy
99 gt hatch beams swapped wife's 94 st hatch my daily driver http://www.6gc.net/forums/index.php?showtopic=82235 n |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: June 20th, 2025 - 5:56 PM |