Spewing oil everywhere, Crank Case vent? Options

[96stgreendemon]

So im in need of some help here, and without pictures its probably not going to do me a bit of good but here it goes. the hose that runs from the bottom of the factory catch can on the 3rd gen, i didnt hook it up at first when i put the motor all back together and it sprayed oil all over my engine bay, so i hook it to my catch can yesterday and it made a sort of gurgling sound. fast forward to today, im driving and all of a sudden a ton of white smoke is coming out from under my car..... pop the hood and the catch can is full. i think i may have gotten the routing of the catch can wrong, can anyone help me out with this?

[Smaay]

you might be pressurizing the crankcase. oil shouldnt be spewing

[Culpable04]

somehow you are getting pressure on the crankcase, it has to be a good amount since the PCV valve is suppose to take care of small changes in pressure. if you want to verify the order the hoses go, give me a call after 5 30, I'll be by my car.

I remember there is a hose that goes from the intercooler to the intake, is pretty close to the hoses of the oil catch can, maybe you have the wrong hose ?

[Neon90424]

read my thread, Blow-by sucks...get ready for new piston rings

This post has been edited by Neon90424: Sep 22, 2011 - 6:09 PM