6G Celicas Forums

Welcome Guest ( Log In | Register )

6 Pages V   1 2 3 > »   
Reply to this topicStart new topic
> FS: Parting out '94 GT Coupe, 56k WARNING 56k WARNING 56k WARNING
post Oct 19, 2011 - 1:58 AM
+Quote Post
Rider



Enthusiast
**
Joined Feb 3, '04
From West Windsor, NJ
Currently Offline

Reputation: 3 (100%)




(almost) EVERYTHING MUST GO

It's a red GT Coupe with almost 194k miles on it. No sunroof, 6-speaker system for those interested in headliner and door panels.

Everything that I can take off myself and isn't too big ships from New Jersey via [your choice]. If it's big/heavy (e.g. the entire interior) or I can't remove it fairly easy (e.g. rear motor mount), I'd rather you pull it yourself. Make an offer for whatever you want. For parts that come in 2s (or 4s, or whatever), I'd rather sell them as a set.

Recently changed (within the past year):
Front, Rear, Tranny Mounts (Anchor brand, last month)
Sleeved the pipe that runs from the flex pipe to the cat. There was a flange there, now there's a sleeve because the stress that the bad mounts caused broke the flange (last month)
Air Intake - Replaced with K&N and black metal short ram. Practically new (less than 5,000 miles on those)
Timing Belt, Water Pump (new, not rebuilt), Thermostat, Water Pump Gasket (this spring, less than 15k miles ago)
Spark Plugs (NGK Iridium), Spark Plug Wires (NGK OE), Distributor Rotor, Distributor Cap
Belts (Power Steering, Alternator, and whatever the third one is)
Valve Cover Gasket, Tube Seals
Struts (KYB), Strut Mounts, boots, and bump stops
Left Axle/CV/whatever it's called

Also changed, but a little over a year ago: Flex Pipe

Things you don't want because they're in crap condition:
Left axle
The power steering system as a whole - if you want certain parts, I'll inspect them and tell you the condition, but something somewhere is leaking so you definitely don't want the whole system
Trunk lift struts
Left low-beam
Cabin air filter
Certain parts of the interior - ask for specifics and I'll send you pics of them
Head unit (aftermarket, CD player has problems)
Gauges (Reverse Glow, but with LED issues)
Driver's side window regulator/motor
Front right bottom speaker from 6-speaker system

Non-Standard Parts:
TRD Shift Knob
K&N filter and short ram intake (see "recently changed")
Wheels are 17" Scion tC rims (not the new ones). Pretty bad curb rash on the rims of all 4; BARE RIMS, I had to move the tires to the new car
Tanabe Lowering Springs. 2.2" in the front, 1.5" in the back.
Not sure if the clutch is OEM. I just know it was changed before I got it (around 80-90k?).

SOLD (or promised to people):
Air bags + controller
Alternator
Climate control unit (the box with the knobs and the two cables)
Valve cover + nuts
Window trim

Anything else, make an offer!

This post has been edited by Rider: Jan 15, 2012 - 6:20 AM
post Oct 19, 2011 - 5:43 AM
+Quote Post
Spider77



Enthusiast
*****
Joined Jan 17, '08
From JB MDL, NJ
Currently Offline

Reputation: 30 (100%)




Window Trim (Both driver/passenger front and rear)
?
post Oct 19, 2011 - 7:37 AM
+Quote Post
shaq

Enthusiast
*
Joined Mar 26, '11
From MD
Currently Offline

Reputation: 10 (100%)




What color is the car? I'm looking to buy the hood from you.
post Oct 19, 2011 - 9:19 AM
+Quote Post
str8thugginit4ya

Enthusiast
***
Joined Dec 11, '07
From Davie, Florida
Currently Offline

Reputation: 4 (100%)




Any pics of the door panels?
post Oct 19, 2011 - 7:15 PM
+Quote Post
foxcraze

Enthusiast
*
Joined Jul 26, '08
From Fort Bragg, NC
Currently Offline

Reputation: 2 (100%)





i need three female plugs with about 6 inches of wire still hooked to them. The far left one is the oil pressure switch female plug the other one on far right I have no clue what its called but you can see where it is in the photo. If you can get these two plus the one in the middle of them, they all come out of the same wire loom, for me that would be great.






--------------------
post Oct 19, 2011 - 10:49 PM
+Quote Post
Rider



Enthusiast
**
Joined Feb 3, '04
From West Windsor, NJ
Currently Offline

Reputation: 3 (100%)




NOTE TO EVERYONE: I'll be posting daily updates, but the car is about 15 miles away so I can only check items every few days.

QUOTE (Spider77 @ Oct 19, 2011 - 6:43 AM) *
Window Trim (Both driver/passenger front and rear)
?


I have to check the condition, but I think all window trim is still good. $10+shipping?

QUOTE (shaq @ Oct 19, 2011 - 8:37 AM) *
What color is the car? I'm looking to buy the hood from you.


Red. Maaco paint job from a couple years ago though, so it's already dull. I think it's in good condition, but I gotta go and check. I'll post up pics Friday. Assuming it's not bent or anything, $75+shipping?

QUOTE (str8thugginit4ya @ Oct 19, 2011 - 10:19 AM) *
Any pics of the door panels?


I'll have pics up for door panels as well Friday, with details of any issues I find.

QUOTE (foxcraze @ Oct 19, 2011 - 8:15 PM) *
i need three female plugs with about 6 inches of wire still hooked to them. The far left one is the oil pressure switch female plug the other one on far right I have no clue what its called but you can see where it is in the photo. If you can get these two plus the one in the middle of them, they all come out of the same wire loom, for me that would be great.




I think I have the first two in good condition, but the wire broke at the top of the third? Again, gotta go and check. Pics will be up Friday.

TL;DR? I'M RESPONDING TO SPECIFIC POSTS. PICS WILL BE UP FRIDAY FOR EVERYTHING THAT WAS REQUESTED
post Oct 20, 2011 - 3:37 PM
+Quote Post
kingcarlito4991

Enthusiast
*
Joined Aug 8, '11
From new windsor, new york
Currently Offline

Reputation: 2 (100%)




are the front seats in good condition i live in new york so i will come pick them up how much
post Oct 20, 2011 - 3:39 PM
+Quote Post
spy00005



Enthusiast
***
Joined May 15, '09
From yonkers, NY
Currently Offline

Reputation: 8 (100%)




how much for CC unit and MAP light?


--------------------
*Thing i want for my car(i wish i had money)*
-full gt4 front end conversion (DONE :) JUST NEEDS PAINT(next on to do list) -new seats all around
-riser blocks -fog lights -new radio and speakers all around
-full bodykit splitters and sideskirts to go with conversion (just needs fitting and painting)
-nice rims (Got TC rims and painted them white)
-light blue tint (next step will do this right after i get my paint job)
WTB Reasonably priced
Projectors just Lows
post Oct 20, 2011 - 11:12 PM
+Quote Post
Rider



Enthusiast
**
Joined Feb 3, '04
From West Windsor, NJ
Currently Offline

Reputation: 3 (100%)




QUOTE (kingcarlito4991 @ Oct 20, 2011 - 4:37 PM) *
are the front seats in good condition i live in new york so i will come pick them up how much


Driver's seat is pretty good, but the plastic part (where the seat back adjustment is) is loose. Passenger's seat has a tear right in the middle, probably 8 inches long and pretty deep.

Are you willing to take them out yourself? Who knows, maybe you'll find something else you like* wink.gif

*Just kidding, I just don't want to have to take them out myself.

QUICK NOTE:
Several people have already asked me about shocks/struts and springs, so there's a sort of waiting list for each already. If you've PMed me, wait for a reply; otherwise, assume they're already sold unless I post otherwise.

This post has been edited by Rider: Oct 20, 2011 - 11:22 PM
post Oct 21, 2011 - 1:46 PM
+Quote Post
carlc376

Enthusiast

Joined Sep 25, '11
From Sparta, Mi
Currently Offline

Reputation: 0 (0%)




Do you have the center console ashtray?
post Oct 21, 2011 - 3:09 PM
+Quote Post
Jaws4God



Enthusiast
*****
Joined Mar 27, '04
Currently Offline

Reputation: 14 (100%)




stock muffler?



--------------------
~Daniel~ No Longer Celica Owner.. moved on to a 03 WRX-EJ207
post Oct 21, 2011 - 3:55 PM
+Quote Post
Spider77



Enthusiast
*****
Joined Jan 17, '08
From JB MDL, NJ
Currently Offline

Reputation: 30 (100%)




$10 shipping, as long as its in good condition let me know what total is to 76106
post Oct 22, 2011 - 3:11 AM
+Quote Post
Rider



Enthusiast
**
Joined Feb 3, '04
From West Windsor, NJ
Currently Offline

Reputation: 3 (100%)




QUOTE (carlc376 @ Oct 21, 2011 - 2:46 PM) *
Do you have the center console ashtray?

Yes. It smells like smoke.

QUOTE (Jaws4God @ Oct 21, 2011 - 4:09 PM) *
stock muffler?

Yup. Make an offer.

QUOTE (Spider77 @ Oct 21, 2011 - 4:55 PM) *
$10 shipping, as long as its in good condition let me know what total is to 76106

PMed.

QUOTE (Rider @ Oct 19, 2011 - 11:49 PM) *
QUOTE (shaq @ Oct 19, 2011 - 8:37 AM) *
What color is the car? I'm looking to buy the hood from you.

Red. Maaco paint job from a couple years ago though, so it's already dull. I think it's in good condition, but I gotta go and check. I'll post up pics Friday. Assuming it's not bent or anything, $75+shipping?

No pic necessary. No dents. PM me if you're still interested.

QUOTE (Rider @ Oct 21, 2011 - 12:12 AM) *
QUOTE (kingcarlito4991 @ Oct 20, 2011 - 4:37 PM) *
are the front seats in good condition i live in new york so i will come pick them up how much


Driver's seat is pretty good, but the plastic part (where the seat back adjustment is) is loose. Passenger's seat has a tear right in the middle, probably 8 inches long and pretty deep.


They're worse than I thought. I'll PM you pics tomorrow evening.

To str8thugginit4ya and foxcraze: Sorry, no pics today. I'll PM you guys pics tomorrow (Saturday) evening.

This post has been edited by Rider: Oct 22, 2011 - 3:26 AM
post Oct 22, 2011 - 6:29 AM
+Quote Post
denis

Enthusiast

Joined Jul 17, '11
From Spain
Currently Offline

Reputation: 0 (0%)




pm!
post Oct 22, 2011 - 8:47 AM
+Quote Post
advancetoyota



Enthusiast
*
Joined Sep 1, '10
Currently Offline

Reputation: 0 (0%)




got pics of the front seats???
post Oct 22, 2011 - 3:20 PM
+Quote Post
LimitedGT4



Enthusiast
**
Joined Apr 18, '11
From Southern Alabama
Currently Offline

Reputation: 1 (100%)




do you have the gt rear disc brake assembly? and how much? i only need the hubs and e break cable

dont need the rotors/disc or calipers
post Oct 22, 2011 - 6:55 PM
+Quote Post
rkelly_83543

Enthusiast

Joined Feb 8, '09
From Moscow, ID
Currently Offline

Reputation: 0 (0%)




How much for the driver's side tail light shipped to 83843? Thanks!
post Oct 22, 2011 - 9:15 PM
+Quote Post
jiggy2dmax

Enthusiast

Joined Oct 22, '11
From NY
Currently Offline

Reputation: 0 (0%)




I need the center bezel..(the one around the head unit/ac unit). I'm also interested in the engine mounts....I need the front/rear/driver side if available.

Thanks
post Oct 23, 2011 - 1:34 AM
+Quote Post
Rider



Enthusiast
**
Joined Feb 3, '04
From West Windsor, NJ
Currently Offline

Reputation: 3 (100%)




^ ^ ^ I'll have specific replies for you guys (LimitedGT4, rkelly_83543, jiggy2dmax) tomorrow afternoon/evening, sorry... I've been busy looking for another car pretty much 24 hours a day. Basically, everything you guys want is available, but the E-brake cable may be screwed up. The front seat pics for advancetoyota and kingcarlito4991 will be up tomorrow as well.
post Oct 23, 2011 - 2:15 PM
+Quote Post
94celicadude



Enthusiast
***
Joined Mar 28, '04
From St.Louis
Currently Offline

Reputation: 15 (100%)




Any chance you still have the two knobs from the heater controls?

I'll buy both from you if so.

Thanks


--------------------

1994 GT Hatchback
1994 ST Coupe
1988 Corolla Wagon All-Trac
1999 Corvette
2008 Cobalt SS Turbo
post Oct 23, 2011 - 3:25 PM
+Quote Post
denis

Enthusiast

Joined Jul 17, '11
From Spain
Currently Offline

Reputation: 0 (0%)




I will need all the cruise control sistem such as actuator, cables etc.. let me know if you sell it.
Thanks
post Oct 24, 2011 - 1:00 PM
+Quote Post
hjesse11

Enthusiast

Joined Aug 1, '11
From Pittsburgh
Currently Offline

Reputation: 0 (0%)




how old are the lowering springs and how much would you sell em for? thanks
post Oct 24, 2011 - 10:08 PM
+Quote Post
Rider



Enthusiast
**
Joined Feb 3, '04
From West Windsor, NJ
Currently Offline

Reputation: 3 (100%)




QUOTE (94celicadude @ Oct 23, 2011 - 3:15 PM) *
Any chance you still have the two knobs from the heater controls?

I'll buy both from you if so.

Thanks


Someone is buying the entire CC unit. Sorry.

QUOTE (denis @ Oct 23, 2011 - 4:25 PM) *
I will need all the cruise control sistem such as actuator, cables etc.. let me know if you sell it.
Thanks


Yes, but I'll have to figure out how to take it out. And I'm working on removing other parts right now, so it'll be a while.

QUOTE (hjesse11 @ Oct 24, 2011 - 2:00 PM) *
how old are the lowering springs and how much would you sell em for? thanks


About 3-4 people already messaged me about them, so I'm gonna say they're practically sold already. I'll put you on the "waiting list," but I'd search for other sources in the meantime if I were you.
post Oct 24, 2011 - 10:47 PM
+Quote Post
Rider



Enthusiast
**
Joined Feb 3, '04
From West Windsor, NJ
Currently Offline

Reputation: 3 (100%)




OMG PICS!!

Front seat pics were sent to the two that asked for them.

Driver's Door Panel:

No tears, some scuffing.

The glue is not holding the leather too well at the top of the soft part, so it comes out pretty often. Easy fix: put some superglue in there.


Passenger's Door Panel:

Obvious tear there, plus a small cigarette burn on the flat part that continues from the handle (you can't see it), plus a cut toward the top, next to the window (look right above the circular tear, right by the grass; you should be able to see it when you zoom in). I DO have the hinge insert, it's just not shown in the picture. Some scuffing, less than driver's side.

DOOR PANEL NOTE: One screw and one screw cap are missing.

Pic of the requested plugs:

Obviously the wire on the third one is cut/torn.

Useless pic of the hood to prove there are no dents:


This post has been edited by Rider: Oct 24, 2011 - 10:58 PM
post Oct 24, 2011 - 10:54 PM
+Quote Post
Rider



Enthusiast
**
Joined Feb 3, '04
From West Windsor, NJ
Currently Offline

Reputation: 3 (100%)




QUOTE (rkelly_83543 @ Oct 22, 2011 - 7:55 PM) *
How much for the driver's side tail light shipped to 83843? Thanks!

PM me with an offer.

QUOTE (jiggy2dmax @ Oct 22, 2011 - 10:15 PM) *
I need the center bezel..(the one around the head unit/ac unit). I'm also interested in the engine mounts....I need the front/rear/driver side if available.

Thanks

PM me with offers for everything. Mounts are Anchor brand, practically new.

QUOTE (LimitedGT4 @ Oct 22, 2011 - 4:20 PM) *
do you have the gt rear disc brake assembly? and how much? i only need the hubs and e break cable

dont need the rotors/disc or calipers

Let me get back to you, I'm waiting for a response from someone else.

This post has been edited by Rider: Oct 24, 2011 - 11:53 PM
post Oct 25, 2011 - 2:56 AM
+Quote Post
foxcraze

Enthusiast
*
Joined Jul 26, '08
From Fort Bragg, NC
Currently Offline

Reputation: 2 (100%)




"i need three female plugs with about 6 inches of wire still hooked to them. The far left one is the oil pressure switch female plug the other one on far right I have no clue what its called but you can see where it is in the photo. If you can get these two plus the one in the middle of them, they all come out of the same wire loom, for me that would be great."


Hey man i will gladly take those two plugs off of you but there is one plug from my picture you didnt show its to the left of those three mounted to the block closer to the header. If you look at my pic again you will see what i mean. If that third one is good as well i will take all three with about 6-8 inches of wire coming from each. How much do i owe you?

Pic of the requested plugs:

Obviously the wire on the third one is cut/torn.



--------------------
post Oct 25, 2011 - 3:03 AM
+Quote Post
Celicarguy

Enthusiast

Joined Oct 25, '11
From Washington
Currently Offline

Reputation: 0 (0%)




I could use the air bags & air bag controller if they are still available?
post Oct 25, 2011 - 7:40 AM
+Quote Post
Rider



Enthusiast
**
Joined Feb 3, '04
From West Windsor, NJ
Currently Offline

Reputation: 3 (100%)




QUOTE (Celicarguy @ Oct 25, 2011 - 4:03 AM) *
I could use the air bags & air bag controller if they are still available?

How do I go about removing those??
post Oct 25, 2011 - 8:17 AM
+Quote Post
Celicarguy

Enthusiast

Joined Oct 25, '11
From Washington
Currently Offline

Reputation: 0 (0%)




The Driver's side air bag is easy - just unbolt from the steering wheel. The Passenger air bag, you have to unbolt the dash to get to its fasteners. I believe the controller is inside the center console (but will verify tonight). If you need it, I can write up more specific instructions.
post Oct 25, 2011 - 12:44 PM
+Quote Post
Rider



Enthusiast
**
Joined Feb 3, '04
From West Windsor, NJ
Currently Offline

Reputation: 3 (100%)




QUOTE (Celicarguy @ Oct 25, 2011 - 9:17 AM) *
The Driver's side air bag is easy - just unbolt from the steering wheel. The Passenger air bag, you have to unbolt the dash to get to its fasteners. I believe the controller is inside the center console (but will verify tonight). If you need it, I can write up more specific instructions.

I took the center cubby/armrest off a couple days ago and it's under there, but what do I do, just unplug it? I don't want the airbags to go off because I did something stupid. Any special requests I'd have to make when shipping because it could go off or something?

Also, you should probably know they haven't been tested during the life of the car. I know the usual test interval is every 10 years.
post Oct 25, 2011 - 11:19 PM
+Quote Post
Celicarguy

Enthusiast

Joined Oct 25, '11
From Washington
Currently Offline

Reputation: 0 (0%)




I'm sure they are fine - I don't know of anyone who tests their air bags (until they get into an accident...).

You need to make sure your battery is disconnected before disconnecting the air bags. If you still have a battery in the car - disconnect the NEGATIVE (or both pos & neg) post. Now you can just disconnect the controller & air bag connectors. The air bags should be totally safe at this point but all of the saftey manuals say to always set the bag with the top (the part that would deploy in an accident) up because if there WERE a deployment it would launch into the sky if you had the bottom up.

Shipping should be no problem either - just don't ship them with a battery. ;-)
post Oct 26, 2011 - 8:29 PM
+Quote Post
rkelly_83543

Enthusiast

Joined Feb 8, '09
From Moscow, ID
Currently Offline

Reputation: 0 (0%)




PM sent
post Oct 28, 2011 - 10:39 AM
+Quote Post
eduardorq



Enthusiast
*
Joined Jul 24, '07
From Canary Islands (Spain)
Currently Offline

Reputation: 3 (100%)




Do you have the cruise control cover?
i would be interested.


--------------------
post Oct 28, 2011 - 12:11 PM
+Quote Post
sbennett

Enthusiast

Joined Oct 17, '11
From Hendersonville, NC
Currently Offline

Reputation: 0 (0%)




Do you still have the alternator? Only if it's compatible with a '95 GT Manual 5s-fe. Shipped to 28793.
post Oct 28, 2011 - 12:17 PM
+Quote Post
crwarrior

Enthusiast
**
Joined Mar 1, '08
Currently Offline

Reputation: 3 (100%)




hey!! do you have the steering wheel by any chance??? i dont need the air bag just the wheel.=)
post Oct 29, 2011 - 5:09 PM
+Quote Post
Rider



Enthusiast
**
Joined Feb 3, '04
From West Windsor, NJ
Currently Offline

Reputation: 3 (100%)




QUOTE (Celicarguy @ Oct 26, 2011 - 12:19 AM) *
I'm sure they are fine - I don't know of anyone who tests their air bags (until they get into an accident...).

You need to make sure your battery is disconnected before disconnecting the air bags. If you still have a battery in the car - disconnect the NEGATIVE (or both pos & neg) post. Now you can just disconnect the controller & air bag connectors. The air bags should be totally safe at this point but all of the saftey manuals say to always set the bag with the top (the part that would deploy in an accident) up because if there WERE a deployment it would launch into the sky if you had the bottom up.

Shipping should be no problem either - just don't ship them with a battery. ;-)


PM me with an offer.

QUOTE (eduardorq @ Oct 28, 2011 - 11:39 AM) *
Do you have the cruise control cover?
i would be interested.


Cruise control cover? What's that? I think I'm selling someone else the entire system, so I'm assuming the cover goes with that.

QUOTE (sbennett @ Oct 28, 2011 - 1:11 PM) *
Do you still have the alternator? Only if it's compatible with a '95 GT Manual 5s-fe. Shipped to 28793.


Let me start the engine and see if it's still working well.

QUOTE (crwarrior @ Oct 28, 2011 - 1:17 PM) *
hey!! do you have the steering wheel by any chance??? i dont need the air bag just the wheel.=)


PM sent.
post Oct 29, 2011 - 5:26 PM
+Quote Post
foxcraze

Enthusiast
*
Joined Jul 26, '08
From Fort Bragg, NC
Currently Offline

Reputation: 2 (100%)




Hey man how much for those three harness plugs never got a reply back from you


--------------------
post Oct 29, 2011 - 11:06 PM
+Quote Post
Celicarguy

Enthusiast

Joined Oct 25, '11
From Washington
Currently Offline

Reputation: 0 (0%)




Am still interested in the airbags/ctlr if available. PM sent also -
post Oct 31, 2011 - 7:05 PM
+Quote Post
Rider



Enthusiast
**
Joined Feb 3, '04
From West Windsor, NJ
Currently Offline

Reputation: 3 (100%)




QUOTE (foxcraze @ Oct 29, 2011 - 6:26 PM) *
Hey man how much for those three harness plugs never got a reply back from you

Still have to check that last one that you mentioned. PM me and we'll continue there so as to not fill up the thread.

This post has been edited by Rider: Oct 31, 2011 - 7:07 PM
post Oct 31, 2011 - 9:56 PM
+Quote Post
JasonTX

Enthusiast
**
Joined Mar 1, '10
From TX
Currently Offline

Reputation: 16 (90%)




drivers side window regulator? shied to texas 77880

thanks

-jec


--------------------
JN 3:16
--------------------------------------
post Nov 1, 2011 - 1:19 AM
+Quote Post
Rider



Enthusiast
**
Joined Feb 3, '04
From West Windsor, NJ
Currently Offline

Reputation: 3 (100%)




QUOTE (JasonTX @ Oct 31, 2011 - 10:56 PM) *
drivers side window regulator? shied to texas 77880

thanks

-jec

What's a window regulator? I feel wee-taw-ded.
post Nov 1, 2011 - 9:34 AM
+Quote Post
ricochet1490



Enthusiast
****
Joined May 3, '11
From Ohio
Currently Offline

Reputation: 8 (100%)




i'll answer this ^ for him lol. it's the metal slide with the window attached to it that goes up and down inside of the door. It is permanently connected to some pulleys and a motor. It's like 5 bolts and some care taken to not bust the glass. 5 min if you've done it before 10-15 if you haven't taken it out before. I sold mine from my part out and crammed a piece of wood in the door to hold the glass up after I removed the part. Just to keep water out of the interior. It's quite easy... esp since you already have the door panels out.


--------------------
post Nov 1, 2011 - 2:29 PM
+Quote Post
Rider



Enthusiast
**
Joined Feb 3, '04
From West Windsor, NJ
Currently Offline

Reputation: 3 (100%)




QUOTE (ricochet1490 @ Nov 1, 2011 - 10:34 AM) *
i'll answer this ^ for him lol. it's the metal slide with the window attached to it that goes up and down inside of the door. It is permanently connected to some pulleys and a motor. It's like 5 bolts and some care taken to not bust the glass. 5 min if you've done it before 10-15 if you haven't taken it out before. I sold mine from my part out and crammed a piece of wood in the door to hold the glass up after I removed the part. Just to keep water out of the interior. It's quite easy... esp since you already have the door panels out.

Thanks!

@JasonTX - PM me with an offer now that I know what you're talking about smile.gif
post Nov 5, 2011 - 7:28 PM
+Quote Post
Ted95



Enthusiast
****
Joined Mar 8, '09
From Westport, MA
Currently Offline

Reputation: 6 (100%)




theres no spoiler right?


--------------------
st205 powered ss3 coupe
post Nov 6, 2011 - 4:05 AM
+Quote Post
Rider



Enthusiast
**
Joined Feb 3, '04
From West Windsor, NJ
Currently Offline

Reputation: 3 (100%)




QUOTE (Ted95 @ Nov 5, 2011 - 7:28 PM) *
theres no spoiler right?

Nope. Sorry...
post Nov 6, 2011 - 7:57 PM
+Quote Post
Originalfuture

Enthusiast
*
Joined Jan 24, '06
From USVI
Currently Offline

Reputation: 0 (0%)




If the driver seat is in good mechanical condition, I am interested in buying the Drivers seat. inbox me and I can pay by paypal.
post Nov 6, 2011 - 8:48 PM
+Quote Post
Originalfuture

Enthusiast
*
Joined Jan 24, '06
From USVI
Currently Offline

Reputation: 0 (0%)




WTB drivers seat??? Inbox me if you have to sell.
post Nov 6, 2011 - 8:54 PM
+Quote Post
Originalfuture

Enthusiast
*
Joined Jan 24, '06
From USVI
Currently Offline

Reputation: 0 (0%)




Need Driver's seat inbox me.
post Nov 9, 2011 - 1:15 AM
+Quote Post
Rider



Enthusiast
**
Joined Feb 3, '04
From West Windsor, NJ
Currently Offline

Reputation: 3 (100%)




QUOTE (Originalfuture @ Nov 6, 2011 - 8:54 PM) *
Need Driver's seat inbox me.

Hey, I'm still discussing it with two other people. It's in good mechanical shape, but "fair" cosmetic shape.
post Nov 10, 2011 - 1:31 AM
+Quote Post
Celicarguy

Enthusiast

Joined Oct 25, '11
From Washington
Currently Offline

Reputation: 0 (0%)




Tried to PM you but your inbox is full. Will PM you tomorrow.
post Nov 10, 2011 - 5:41 AM
+Quote Post
kamax

Enthusiast
**
Joined Apr 29, '03
From lynn,ma
Currently Offline

Reputation: 0 (0%)




the black plastic thing between the hood and the bumper? dont know what's it call.... and the hood latch.

also undercar plastic cover? need the middle and right side.... or was it left lol, gotta check tomorrow.

post Nov 14, 2011 - 11:46 PM
+Quote Post
michlowrider



Enthusiast
*
Joined Sep 22, '11
From midstate michigan
Currently Offline

Reputation: 0 (0%)




Looking for the plastic trim inside the rear of car, the trim you would remove to gain access to the trunk latch. Could you give me price and also if no one has bought the left door panel I would be interested. Thanks

This post has been edited by michlowrider: Nov 14, 2011 - 11:47 PM
post Nov 15, 2011 - 1:21 AM
+Quote Post
dsaia

Enthusiast

Joined Nov 7, '07
From Roseville, CA
Currently Offline

Reputation: 3 (100%)




I’m selling:
• OEM Genuine Mudguards (Set of 4 w/ 16 screws) - $50
• OEM Genuine CD/Cassette/FM/AM w/ Built-in 200W Amplifier & Mounting Brackets plus tweeters & Covers - $100
• OEM Genuine Service Manual Vol I & II & Electrical - $100
• OEM Genuine Owner’s Manual/Ads/Brochures/Sales Literature - $50
• OEM Genuine Trunk Carpet Mat - Like new - $60
• OEM Genuine Spare Tire/Board/Lug Wrench/Scissor Lift/Handle/Net - $60
• OEM Genuine Carpet Floor Mats & Misc - $50
• OEM Genuine Shift Console/Ashtrays/Shift Boot/Lids/Misc - $130
• JSpeed Front Tower Brace (w/ documents) – $220
• C-One Rear Tower Brace w/ Documents - $90
• C-One Trunk Brace w/ Hardware & Documents - $80
• Hawk HPS High Performance Street Ferro-Carbon Front Disc Brake Pads – New - $60
• Hawk Ferro-Carbon Performance Rear Brake Pads (with Shims!) –New - $50
• Injen Cold Air Intake & K&N Velocity Stack Filter - $140
• Hot Earth Voltage Stabilizer/Ground Wires/Fuel Magnets/Timing Light - $90
• Hitch/Ball/Wiring & Fog Lights - $135
• Cover (Covercraft) - $45
• Bra (Le Bra) - $45
post Nov 15, 2011 - 1:38 AM
+Quote Post
ricochet1490



Enthusiast
****
Joined May 3, '11
From Ohio
Currently Offline

Reputation: 8 (100%)




^ HiJACK
on the main buying selling page there is a button in the top right that says "new thread" click that and post in your own
I'm sure Rider would appreciate that


--------------------
post Nov 15, 2011 - 3:27 PM
+Quote Post
Rider



Enthusiast
**
Joined Feb 3, '04
From West Windsor, NJ
Currently Offline

Reputation: 3 (100%)




QUOTE (kamax @ Nov 10, 2011 - 5:41 AM) *
the black plastic thing between the hood and the bumper? dont know what's it call.... and the hood latch.

also undercar plastic cover? need the middle and right side.... or was it left lol, gotta check tomorrow.

Black plastic thing between hood and bumper... huh? I only remember seeing metal in there.
Hood latch... sure, why not?
Under-car plastic... not in good condition. I do have the right part, but it's been dragging on the ground for a bit. You'll have to get nice fat washers to go with the screws/clips down there, 'cause the screws/clips broke the holes out. Hope that makes sense. I don't remember there being a middle part?
post Nov 16, 2011 - 2:11 AM
+Quote Post
Celicarguy

Enthusiast

Joined Oct 25, '11
From Washington
Currently Offline

Reputation: 0 (0%)




Your inbox is full again. I need to check my car to see if I need the driver side gold frame thing. I have a couple of other questions/comments I'll send once your box is available. Please wait to send till I can check my car.

Thanks!
post Nov 16, 2011 - 9:17 AM
+Quote Post
matts94celica



Enthusiast
**
Joined Apr 20, '11
From College Station, Tx
Currently Offline

Reputation: 2 (100%)




Inbox full


--------------------
post Nov 16, 2011 - 2:44 PM
+Quote Post
Chockomon

Enthusiast

Joined Nov 18, '10
From Jersey City, NJ
Currently Offline

Reputation: 0 (0%)




Do you have a spoiler?
post Nov 18, 2011 - 11:53 AM
+Quote Post
Rider



Enthusiast
**
Joined Feb 3, '04
From West Windsor, NJ
Currently Offline

Reputation: 3 (100%)




QUOTE (Chockomon @ Nov 16, 2011 - 2:44 PM) *
Do you have a spoiler?

Rear wing? No, sorry.
post Nov 18, 2011 - 9:44 PM
+Quote Post
foxcraze

Enthusiast
*
Joined Jul 26, '08
From Fort Bragg, NC
Currently Offline

Reputation: 2 (100%)




any new status on the parts listed in the past three pages that were requested?


--------------------
post Nov 20, 2011 - 6:27 AM
+Quote Post
Main-Character88



Enthusiast

Joined Nov 19, '11
From L.A. California
Currently Offline

Reputation: 0 (0%)




got the center lid thing with pull out cupholders?
post Nov 23, 2011 - 5:59 PM
+Quote Post
Rider



Enthusiast
**
Joined Feb 3, '04
From West Windsor, NJ
Currently Offline

Reputation: 3 (100%)




QUOTE (Main-Character88 @ Nov 20, 2011 - 6:27 AM) *
got the center lid thing with pull out cupholders?

Yup.

QUOTE (michlowrider @ Nov 14, 2011 - 11:46 PM) *
Looking for the plastic trim inside the rear of car, the trim you would remove to gain access to the trunk latch. Could you give me price and also if no one has bought the left door panel I would be interested. Thanks

Someone asked about door panels already, still workin' on it with them.

I'm not sure which trim you need. PM me with a more detailed description.
post Nov 23, 2011 - 6:51 PM
+Quote Post
kingcarlito4991

Enthusiast
*
Joined Aug 8, '11
From new windsor, new york
Currently Offline

Reputation: 2 (100%)




how much for both door sills shipped to 12553 if they are in good condition
post Nov 26, 2011 - 3:33 AM
+Quote Post
Ruroniarc

Enthusiast
**
Joined Mar 19, '09
From Malden, MA
Currently Offline

Reputation: 2 (100%)




Washer Fluid Pump shipped to 02148?
post Dec 1, 2011 - 12:51 AM
+Quote Post
Rider



Enthusiast
**
Joined Feb 3, '04
From West Windsor, NJ
Currently Offline

Reputation: 3 (100%)




QUOTE (kingcarlito4991 @ Nov 23, 2011 - 6:51 PM) *
how much for both door sills shipped to 12553 if they are in good condition

PM me with an offer and I'll take pics Saturday.

QUOTE (Ruroniarc @ Nov 26, 2011 - 3:33 AM) *
Washer Fluid Pump shipped to 02148?

PM me with an offer.
post Dec 13, 2011 - 3:26 AM
+Quote Post
Celicarguy

Enthusiast

Joined Oct 25, '11
From Washington
Currently Offline

Reputation: 0 (0%)




Hey Rider,

Still waiting for you to ship the airbags & fuel door that I've paid for. Your mailbox is full so I can't PM you. Please reply and let me know when you will ship.

Thanks -
post Dec 13, 2011 - 11:02 PM
+Quote Post
Rider



Enthusiast
**
Joined Feb 3, '04
From West Windsor, NJ
Currently Offline

Reputation: 3 (100%)




QUOTE (Celicarguy @ Dec 13, 2011 - 3:26 AM) *
Hey Rider,

Still waiting for you to ship the airbags & fuel door that I've paid for. Your mailbox is full so I can't PM you. Please reply and let me know when you will ship.

Thanks -

Replied. Forgot to add that the fuel door is included.
post Dec 19, 2011 - 1:35 AM
+Quote Post
R4R44V15

Enthusiast
*
Joined Oct 20, '11
From Colorado
Currently Offline

Reputation: 0 (0%)




I'm looking for interior headlining clips!
Part # 90467-09169-B2

I need two of them. Have a couple lying around?
post Dec 19, 2011 - 11:52 AM
+Quote Post
SupraKid



Enthusiast
*****
Joined Aug 15, '10
From The Best Coast
Currently Offline

Reputation: 12 (100%)




Your PM box is full.
post Dec 20, 2011 - 10:03 PM
+Quote Post
irocknikes74

Enthusiast

Joined Nov 18, '11
From Elgin, IL
Currently Offline

Reputation: 0 (0%)




PM me about air intake im interested with price
post Dec 21, 2011 - 4:24 PM
+Quote Post
Ted95



Enthusiast
****
Joined Mar 8, '09
From Westport, MA
Currently Offline

Reputation: 6 (100%)




full inbox, pm'd saved ready to send tongue.gif


--------------------
st205 powered ss3 coupe
post Dec 22, 2011 - 7:34 PM
+Quote Post
Rider



Enthusiast
**
Joined Feb 3, '04
From West Windsor, NJ
Currently Offline

Reputation: 3 (100%)




Holy crap, replies! PM'd SupraKid. Also, inbox is no longer full; I'm awaiting PMs from SupraKid and Ted95. R4R44V15, I'll get back to you in a couple days when I swing by my cousin's house.
post Dec 22, 2011 - 8:32 PM
+Quote Post
foxcraze

Enthusiast
*
Joined Jul 26, '08
From Fort Bragg, NC
Currently Offline

Reputation: 2 (100%)




Hey man anything on those plugs yet?


--------------------
post Dec 25, 2011 - 11:47 PM
+Quote Post
R4R44V15

Enthusiast
*
Joined Oct 20, '11
From Colorado
Currently Offline

Reputation: 0 (0%)




QUOTE (Rider @ Dec 22, 2011 - 8:34 PM) *
Holy crap, replies! PM'd SupraKid. Also, inbox is no longer full; I'm awaiting PMs from SupraKid and Ted95. R4R44V15, I'll get back to you in a couple days when I swing by my cousin's house.


Thanks! Just let me know. smile.gif
post Dec 25, 2011 - 11:52 PM
+Quote Post
mkernz22



Enthusiast
*****
Joined May 10, '10
From MA
Currently Offline

Reputation: 37 (100%)




how much for the six speaker door panels?
post Dec 29, 2011 - 3:58 AM
+Quote Post
Rider



Enthusiast
**
Joined Feb 3, '04
From West Windsor, NJ
Currently Offline

Reputation: 3 (100%)




QUOTE (mkernz22 @ Dec 25, 2011 - 11:52 PM) *
how much for the six speaker door panels?

PM me with an offer. People that were previously interested have not messaged me in weeks, so first come first served.
post Dec 29, 2011 - 7:54 AM
+Quote Post
boomer

Enthusiast
*
Joined Jan 26, '11
From ontario canada
Currently Offline

Reputation: 5 (100%)




looking for r/r hub and brg assy must be for disc/abs model
post Jan 3, 2012 - 6:12 PM
+Quote Post
Rider



Enthusiast
**
Joined Feb 3, '04
From West Windsor, NJ
Currently Offline

Reputation: 3 (100%)




QUOTE (boomer @ Dec 29, 2011 - 7:54 AM) *
looking for r/r hub and brg assy must be for disc/abs model

Mine doesn't have ABS.
post Jan 4, 2012 - 6:29 PM
+Quote Post
SallyGloryShine

Enthusiast

Joined May 12, '04
From Madison TN
Currently Offline

Reputation: 0 (0%)




I need both hood hinges. Gimme a price, you can get them off with a 1/4 inch drive and 12mm socket without taking the fenders off. Lemme know.
post Jan 13, 2012 - 9:51 PM
+Quote Post
Rider



Enthusiast
**
Joined Feb 3, '04
From West Windsor, NJ
Currently Offline

Reputation: 3 (100%)




QUOTE (SallyGloryShine @ Jan 4, 2012 - 6:29 PM) *
I need both hood hinges. Gimme a price, you can get them off with a 1/4 inch drive and 12mm socket without taking the fenders off. Lemme know.

I wrote in the original post "name your price" 'cause I don't know what things go for, especially the more unusual parts. I guess $10+shipping?
post Jan 14, 2012 - 12:56 AM
+Quote Post
Jokester



Enthusiast
*
Joined Dec 22, '11
From California
Currently Offline

Reputation: 2 (100%)




Hey, do you still have the tC wheels? Does it come with the tires? And are you willing to ship them?
And can you post a pic of them up (wheel & tires if the tires come also come with it) so that I can get an idea on their condition and see how much they're worth.
Thanks!
post Jan 14, 2012 - 10:22 AM
+Quote Post
taibones

Enthusiast
*
Joined Feb 18, '08
From Kusel Deutschland
Currently Offline

Reputation: 0 (0%)




are you selling the fenders
post Jan 15, 2012 - 3:47 AM
+Quote Post
Rider



Enthusiast
**
Joined Feb 3, '04
From West Windsor, NJ
Currently Offline

Reputation: 3 (100%)




QUOTE (Jokester @ Jan 14, 2012 - 12:56 AM) *
Hey, do you still have the tC wheels? Does it come with the tires? And are you willing to ship them?
And can you post a pic of them up (wheel & tires if the tires come also come with it) so that I can get an idea on their condition and see how much they're worth.
Thanks!

Yes, I have them. No, the tires are off - I put them on the car I got. Yes, I'm willing to ship them.

Pics of 3 of them (the 4th pic didn't come out but it's similar condition):
Yes, there's plenty of curb rash.
post Jan 15, 2012 - 3:50 AM
+Quote Post
Rider



Enthusiast
**
Joined Feb 3, '04
From West Windsor, NJ
Currently Offline

Reputation: 3 (100%)




QUOTE (taibones @ Jan 14, 2012 - 10:22 AM) *
are you selling the fenders

Yes. The front one isn't 100% because of a low-speed (5 mph?) collision with an idiot that made a left and hit the corner of it. It's not dented, but a bit scratched and the paint in front of the headlight has "spiderwebs." I'm sure the geometry is a bit off, but I sure as hell can't see the difference. Not sure if all the bolts/clips/whatever hold it on are in good condition because I was in a rush taking stuff apart and might've broken something. Let me take it off completely (only one side is off right now) and I'll let you know in a couple days.

This post has been edited by Rider: Jan 15, 2012 - 3:51 AM
post Jan 15, 2012 - 4:29 AM
+Quote Post
Jokester



Enthusiast
*
Joined Dec 22, '11
From California
Currently Offline

Reputation: 2 (100%)




QUOTE (Rider @ Jan 15, 2012 - 12:47 AM) *
QUOTE (Jokester @ Jan 14, 2012 - 12:56 AM) *
Hey, do you still have the tC wheels? Does it come with the tires? And are you willing to ship them?
And can you post a pic of them up (wheel & tires if the tires come also come with it) so that I can get an idea on their condition and see how much they're worth.
Thanks!

Yes, I have them. No, the tires are off - I put them on the car I got. Yes, I'm willing to ship them.

Pics of 3 of them (the 4th pic didn't come out but it's similar condition):
Yes, there's plenty of curb rash.


Awww man, I was hoping the tires were still on. But hey, thanks for letting me know!
post Mar 25, 2012 - 6:49 PM
+Quote Post
denis

Enthusiast

Joined Jul 17, '11
From Spain
Currently Offline

Reputation: 0 (0%)




still have the cruise control for sale? you have a pm!
post Mar 26, 2012 - 9:48 PM
+Quote Post
Syaoran



Enthusiast
*****
Joined Jan 4, '12
From US
Currently Offline

Reputation: 6 (100%)




Do you have the throttle body (whole thing, including TPS/IACV etc.) and what condition is it in if so?

Also need the coolant temp sensor and Intake Air Temp Sensor if you have them. smile.gif Thanks.


--------------------
1993 Celica GT Coupe - sold
1994 Celica GT Liftback
post Mar 26, 2012 - 11:07 PM
+Quote Post
blackceclia0823

Enthusiast

Joined Mar 22, '12
From rhode island
Currently Offline

Reputation: 0 (0%)




Do you have the upper door speaker covers for both sides? They cover where the tweeter use to go.
post Mar 27, 2012 - 11:04 AM
+Quote Post
Originalfuture

Enthusiast
*
Joined Jan 24, '06
From USVI
Currently Offline

Reputation: 0 (0%)




WTB Drivers side seat.
If seat functions properly and in good working condition PM a price.






QUOTE (Rider @ Oct 19, 2011 - 1:58 AM) *
(almost) EVERYTHING MUST GO

It's a red GT Coupe with almost 194k miles on it. No sunroof, 6-speaker system for those interested in headliner and door panels.

Everything that I can take off myself and isn't too big ships from New Jersey via [your choice]. If it's big/heavy (e.g. the entire interior) or I can't remove it fairly easy (e.g. rear motor mount), I'd rather you pull it yourself. Make an offer for whatever you want. For parts that come in 2s (or 4s, or whatever), I'd rather sell them as a set.

Recently changed (within the past year):
Front, Rear, Tranny Mounts (Anchor brand, last month)
Sleeved the pipe that runs from the flex pipe to the cat. There was a flange there, now there's a sleeve because the stress that the bad mounts caused broke the flange (last month)
Air Intake - Replaced with K&N and black metal short ram. Practically new (less than 5,000 miles on those)
Timing Belt, Water Pump (new, not rebuilt), Thermostat, Water Pump Gasket (this spring, less than 15k miles ago)
Spark Plugs (NGK Iridium), Spark Plug Wires (NGK OE), Distributor Rotor, Distributor Cap
Belts (Power Steering, Alternator, and whatever the third one is)
Valve Cover Gasket, Tube Seals
Struts (KYB), Strut Mounts, boots, and bump stops
Left Axle/CV/whatever it's called

Also changed, but a little over a year ago: Flex Pipe

Things you don't want because they're in crap condition:
Left axle
The power steering system as a whole - if you want certain parts, I'll inspect them and tell you the condition, but something somewhere is leaking so you definitely don't want the whole system
Trunk lift struts
Left low-beam
Cabin air filter
Certain parts of the interior - ask for specifics and I'll send you pics of them
Head unit (aftermarket, CD player has problems)
Gauges (Reverse Glow, but with LED issues)
Driver's side window regulator/motor
Front right bottom speaker from 6-speaker system

Non-Standard Parts:
TRD Shift Knob
K&N filter and short ram intake (see "recently changed")
Wheels are 17" Scion tC rims (not the new ones). Pretty bad curb rash on the rims of all 4; BARE RIMS, I had to move the tires to the new car
Tanabe Lowering Springs. 2.2" in the front, 1.5" in the back.
Not sure if the clutch is OEM. I just know it was changed before I got it (around 80-90k?).

SOLD (or promised to people):
Air bags + controller
Alternator
Climate control unit (the box with the knobs and the two cables)
Valve cover + nuts
Window trim

Anything else, make an offer!

post Mar 27, 2012 - 12:35 PM
+Quote Post
conus00

Enthusiast
***
Joined Jul 10, '08
From Tampa, FL
Currently Offline

Reputation: 8 (100%)




What shape are all three trunk panels (also do you have all the bolts holding them in place?), carpet and spare wheel lid (cover)?
I'm interested.


--------------------
'94 ST
post Mar 27, 2012 - 12:36 PM
+Quote Post
Special_Edy



Enthusiast
****
Joined Oct 29, '11
From Haltom City, Texas
Currently Offline

Reputation: 1 (100%)




Id be super interested in the manual shifter boot, center trim that covers up the radio/climate control/clock, the triangle trim over the tweeter on the driver door.
Oh and unless shipping is outrageous then the passenger side front fender too
Zip code is 76017
Cant wait to hear back!

This post has been edited by Special_Edy: Mar 27, 2012 - 1:50 PM
post Mar 27, 2012 - 1:06 PM
+Quote Post
Warapparel

Enthusiast
*
Joined Mar 4, '12
From San Francisco, CA
Currently Offline

Reputation: 8 (100%)




how much for the kyb set up shipped to 92109?
post Mar 27, 2012 - 2:48 PM
+Quote Post
WhipCreamCelica



Enthusiast
*
Joined Feb 1, '12
From The Colony, TX
Currently Offline

Reputation: 1 (100%)




shift boot and shift boot frame if you dont mind? shipping to texas?
post Mar 28, 2012 - 11:45 AM
+Quote Post
eman2492

Enthusiast

Joined Apr 4, '11
From minneapolis minnesota
Currently Offline

Reputation: 1 (100%)




both front seats, shipped to 55432?
post Mar 29, 2012 - 2:40 AM
+Quote Post
Detatch

Enthusiast
*
Joined Sep 28, '09
From Washington, MO
Currently Offline

Reputation: 0 (0%)




QUOTE (Rider @ Oct 19, 2011 - 1:58 AM) *
(almost) EVERYTHING MUST GO

It's a red GT Coupe with almost 194k miles on it. No sunroof, 6-speaker system for those interested in headliner and door panels.

Everything that I can take off myself and isn't too big ships from New Jersey via [your choice]. If it's big/heavy (e.g. the entire interior) or I can't remove it fairly easy (e.g. rear motor mount), I'd rather you pull it yourself. Make an offer for whatever you want. For parts that come in 2s (or 4s, or whatever), I'd rather sell them as a set.

Recently changed (within the past year):
Front, Rear, Tranny Mounts (Anchor brand, last month)
Sleeved the pipe that runs from the flex pipe to the cat. There was a flange there, now there's a sleeve because the stress that the bad mounts caused broke the flange (last month)
Air Intake - Replaced with K&N and black metal short ram. Practically new (less than 5,000 miles on those)
Timing Belt, Water Pump (new, not rebuilt), Thermostat, Water Pump Gasket (this spring, less than 15k miles ago)
Spark Plugs (NGK Iridium), Spark Plug Wires (NGK OE), Distributor Rotor, Distributor Cap
Belts (Power Steering, Alternator, and whatever the third one is)
Valve Cover Gasket, Tube Seals
Struts (KYB), Strut Mounts, boots, and bump stops
Left Axle/CV/whatever it's called

Also changed, but a little over a year ago: Flex Pipe

Things you don't want because they're in crap condition:
Left axle
The power steering system as a whole - if you want certain parts, I'll inspect them and tell you the condition, but something somewhere is leaking so you definitely don't want the whole system
Trunk lift struts
Left low-beam
Cabin air filter
Certain parts of the interior - ask for specifics and I'll send you pics of them
Head unit (aftermarket, CD player has problems)
Gauges (Reverse Glow, but with LED issues)
Driver's side window regulator/motor
Front right bottom speaker from 6-speaker system

Non-Standard Parts:
TRD Shift Knob
K&N filter and short ram intake (see "recently changed")
Wheels are 17" Scion tC rims (not the new ones). Pretty bad curb rash on the rims of all 4; BARE RIMS, I had to move the tires to the new car
Tanabe Lowering Springs. 2.2" in the front, 1.5" in the back.
Not sure if the clutch is OEM. I just know it was changed before I got it (around 80-90k?).

SOLD (or promised to people):
Air bags + controller
Alternator
Climate control unit (the box with the knobs and the two cables)
Valve cover + nuts
Window trim

Anything else, make an offer!


how much for what's left of the car (minus engine and transmission)?
post Mar 31, 2012 - 7:11 PM
+Quote Post
toyota_guy

Enthusiast

Joined Mar 31, '12
From Virginia
Currently Offline

Reputation: 0 (0%)




how much do you want for the ecu?
post Apr 1, 2012 - 10:17 PM
+Quote Post
conus00

Enthusiast
***
Joined Jul 10, '08
From Tampa, FL
Currently Offline

Reputation: 8 (100%)




Is this thread still alive?


--------------------
'94 ST
post Apr 20, 2012 - 8:32 AM
+Quote Post
DaCCelica94



Enthusiast
*
Joined Oct 20, '07
From North Charleston, South Carolina
Currently Offline

Reputation: 4 (100%)




hows the front passenger spindle?
post Apr 27, 2012 - 2:59 PM
+Quote Post
Rider



Enthusiast
**
Joined Feb 3, '04
From West Windsor, NJ
Currently Offline

Reputation: 3 (100%)




The forum will only let me include so many quotes, so I did some manually...

blackceclia0823: "Do you have the upper door speaker covers for both sides? They cover where the tweeter use to go."
Yes. PM me an offer

Originalfuture: "WTB Drivers side seat. If seat functions properly and in good working condition PM a price."

I'll PM you a pic and you can PM me an offer smile.gif

conus00: "What shape are all three trunk panels (also do you have all the bolts holding them in place?), carpet and spare wheel lid (cover)? I'm interested."

I think they're pretty bad. Had a water bottle break open a long time ago and never took them out to dry them. I'll see if they smell and if the bolts are all there, and PM you.

QUOTE (Special_Edy @ Mar 27, 2012 - 1:36 PM) *
Id be super interested in the manual shifter boot, center trim that covers up the radio/climate control/clock, the triangle trim over the tweeter on the driver door.
Oh and unless shipping is outrageous then the passenger side front fender too
Zip code is 76017
Cant wait to hear back!


The boot is pretty crappy. I remember wanting to make my own to replace it. It's leather, but the top is kind of ripped. Center trim is good, triangle trim is good unless blackceclia0823 wants it along with the tweeter covers. Shipping would probably be quite a bit to Texas - at least $30-40 for Greyhound if they'll accept it, plus a box for it; also, I'm still talking to someone that wants both fenders.

QUOTE (Warapparel @ Mar 27, 2012 - 2:06 PM) *
how much for the kyb set up shipped to 92109?


Struts cost $110 new, mounts $26 new, boots and bump stops something like $20 new; they only were on for 8 months, 3 of which I was away. Knowing that, PM me an offer. $80 shipped is what someone else offered me for the struts and mounts, and I thought that was much too low considering I paid ~$140 for those, including shipping.

QUOTE (WhipCreamCelica @ Mar 27, 2012 - 3:48 PM) *
shift boot and shift boot frame if you dont mind? shipping to texas?


Shift boot - if Special_Edy doesn't want it and you do. Shift boot frame - Isn't it attached?

QUOTE (eman2492 @ Mar 28, 2012 - 12:45 PM) *
both front seats, shipped to 55432?


Gotta wait to get an answer from Originalfuture on the driver's seat first.

QUOTE (Detatch @ Mar 29, 2012 - 3:40 AM) *
how much for what's left of the car (minus engine and transmission)?


Tempting, but I want to sell more parts first. Will you still be interested around June 10th-15th?

QUOTE (toyota_guy @ Mar 31, 2012 - 8:11 PM) *
how much do you want for the ecu?


PM me an offer. I'd love to get rid of it.

QUOTE (conus00 @ Apr 1, 2012 - 11:17 PM) *
Is this thread still alive?


I just brought it back to life. Sorry.

QUOTE (DaCCelica94 @ Apr 20, 2012 - 9:32 AM) *
hows the front passenger spindle?


Responding to your PM now.
post Apr 28, 2012 - 12:54 AM
+Quote Post
superman8589

Enthusiast
*
Joined Nov 23, '11
From Tampa, FL
Currently Offline

Reputation: 0 (0%)




Do u have pistons? If u do and willing sell them I'm willing to buy it reality is all I need is are the rods... 33612

6 Pages V   1 2 3 > » 
Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: June 12th, 2025 - 6:52 PM