![]() |
![]() ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 18, '06 From Calgary, Canada Currently Offline Reputation: 37 (100%) ![]() |
I've had my window covered up with cardboard because I removed the engine harness etc with the old engine, and now I need to get my window rolled up ASAP - theres got to be a way to manually crank the window motor/regulator to get the window up, right?
Appreciate the help! -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 23, '12 From Warrior, AL Currently Offline Reputation: 0 (0%) ![]() |
Bad weather on the way? May just be easier to get a tarp and cover the car. Only way I could think to do it without forcing the motor would be to remove the glass from the regulator and block it.
-------------------- 2001 Miata LS 5-speed
|
![]() |
|
![]() Enthusiast ![]() Joined Sep 22, '11 From midstate michigan Currently Offline Reputation: 0 (0%) ![]() |
You can always take your battery, hook up a pos. and neg jumper wires ( about 12 gauge wire or even heavy speaker wire ) jump it at the switch or jump it at the window motor
I've had my window covered up with cardboard because I removed the engine harness etc with the old engine, and now I need to get my window rolled up ASAP - theres got to be a way to manually crank the window motor/regulator to get the window up, right? Appreciate the help! You can always take your battery, hook up a pos. and neg jumper wires ( about 12 gauge wire or even heavy speaker wire ) jump it at the switch or jump it at the window motor I've had my window covered up with cardboard because I removed the engine harness etc with the old engine, and now I need to get my window rolled up ASAP - theres got to be a way to manually crank the window motor/regulator to get the window up, right? Appreciate the help! |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 18, '06 From Calgary, Canada Currently Offline Reputation: 37 (100%) ![]() |
You can always take your battery, hook up a pos. and neg jumper wires ( about 12 gauge wire or even heavy speaker wire ) jump it at the switch or jump it at the window motor this is what i ended up doing. tore the door card apart and unplugged the regulator... solid grn and solid red wires and hooked the battery up to the pins in the plug. worked like a charm. This post has been edited by KAOS: Mar 24, 2012 - 7:58 PM -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 23, '12 From Warrior, AL Currently Offline Reputation: 0 (0%) ![]() |
Glad you got it to work out.
-------------------- 2001 Miata LS 5-speed
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 18, '06 From Calgary, Canada Currently Offline Reputation: 37 (100%) ![]() |
-------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: August 21st, 2025 - 12:51 PM |