FS. Front Bumper, USDM Stock Hood, USDM Fenders, Front Crash Bar, Tail, WRC Water Injection Pump, JDM water reservoir, RHD USDM Hood latch Options

[JohanFer]

Hi everyone, I have a few items left over after my front end conversion. I can guess on some of the things, but on others, I will ask for your help.

As for prices, make an offer and I will respond. The one with the best offered price will get it.

If I happen to sell something, I will be deleting the pictures here so you always know what is available.

Here are the items:

1. IC and Fuel Relay (Sold)
2. Water Injection Pump and Regulator 25 + shipping
3. JDM Water Reservoir 15 + shipping
4. Front Crash Bar 50 + shipping
5. Driver's Side Tail ligth 10 + shipping
6. USDM Stock Front bumper 150 pick up only
7. USDM Stock Hood 200 pick up only
8. USDM Fenders 60 and 70 for the right and left respectively
9. Hood latch for RHD with short hook 15 + shipping
10. Hatch with 3 post spoiler 200 pick up only
11. Two post spoiler 50 pick up only


The following five pictures are of the wiring harness that connects the headlamps, horns, fog lights and everything that is at the front of the car. It is cut at the ends, left and right, as you can see in the pictures.







This is the water injection pump and regulator for the WRC ST-205. It comes with all its connectors. The motors are there, but I think that one is busted. See the pictures




This is a JDM water reservoir.


This is the front crash bar with its supports.


This is the driver's side tail light. It is chipped, but if you have nothing, this would be better than nothing.


This is a USDM front bumper. It is in very good condition. Pearl in color.




This is the USDM stock hood as pictured in both sides. Pearl in color.




Both fenders, passenger side has a small dent at the front by the parking light, here are the pictures for their condition. Driver's side is perfect. Pearl in color.







Hood latch for Right Hand Drive with short hood. This can be used if you did a left hand drive conversion.




Three post hatch with spoiler



Two post spoiler



This post has been edited by JohanFer: Feb 16, 2013 - 2:55 AM

[Syaoran]

Think you could try and get the bumper shipped overseas to PR?

[JohanFer]

Think you could try and get the bumper shipped overseas to PR?

Is this, Puerto Rico? If so, yes if I find a box large enough to figure out the shipping. It is relatively light so I don't think it will be that expensive to ship. I was really wanting to sell local, but we'll see. Let me figure out the weight in a box, if I find one.

[zfjohnson07]

if he dont get it, I want it, if you would ship it to texas? i hate to even ask but ive been to junk yars around me and 6gc's are scarce freaking toyota heaven (big toyota junk yard) wanted 300 for a used front bumper!!!

[djyohimbe]

How much for the hood liner, shipped to 98230?

[Batman722]

Hi everyone, I have a few items left over after my front end conversion. I can guess on some of the things, but on others, I will ask for your help.

As for prices, make an offer and I will respond.

If I happen to sell something, I will be deleting the pictures here so you always know what is available.

Here are the items:




This is the relay box for the fuel pump and IC. These are not easy to find and there are a few members that are looking for it. It makes it plug and play for the st205 swap with top mount IC.

This is the container that holds the washer liquid. It comes with all its connectors. The motors are there, but I think that one is busted.

That's the water injection pump and regulator for a WRC st205.
This is the water reservoir that gets connected to the radiator.

Bigger than a US celica's, JDM st205.

I've no idea what this is, but it is heavy and was by the radiator's water reservoir. I think it is a pump.

That's the st205 intercooler pump. Again not super easy to find.

I don't know what these two things are either, but these were at the front of the car next of the radiator.


Top pic is the AC condensor, useless. Top left of the first pic and bottom pic is the st205 heat exchanger, again not easy to find and awesome.

You have some very good parts worth some good $ FYI.

[CAcelica29]

where in LA are you as im not far from LA i would be interested in your driverside fender if the price is good.

[Syaoran]

Think you could try and get the bumper shipped overseas to PR?

Is this, Puerto Rico? If so, yes if I find a box large enough to figure out the shipping. It is relatively light so I don't think it will be that expensive to ship. I was really wanting to sell local, but we'll see. Let me figure out the weight in a box, if I find one.

Just a suggestion but I don't think you'll find a box big enough, however you might have success using multiple boxes taped together Let me know! USPS might take it since it's less than 70lbs, you'll have to check size restrictions for shipping by sea (Parcel Post) which is the most economical method.

[WannabeGT4]

I'm interested in the pump. Or at the very least the bracket that is on it. Shoot me a PM with a price.

[JohanFer]

Hey guys, remember thatI asked for offers. I am not capable of coming up with prices. Post them here if you please

On a side note, my high and low beams apparently were thrown away as I cannot find them for the life of me. Sorry

How much for the hood liner, shipped to 98230?

Hi, I really wanted to sell that hood with its liner.

Hi everyone, I have a few items left over after my front end conversion. I can guess on some of the things, but on others, I will ask for your help.

As for prices, make an offer and I will respond.

If I happen to sell something, I will be deleting the pictures here so you always know what is available.

Here are the items:

This is the relay box for the fuel pump and IC. These are not easy to find and there are a few members that are looking for it. It makes it plug and play for the st205 swap with top mount IC.

This is the container that holds the washer liquid. It comes with all its connectors. The motors are there, but I think that one is busted.

That's the water injection pump and regulator for a WRC st205.
This is the water reservoir that gets connected to the radiator.

Bigger than a US celica's, JDM st205.

I've no idea what this is, but it is heavy and was by the radiator's water reservoir. I think it is a pump.

That's the st205 intercooler pump. Again not super easy to find.

I don't know what these two things are either, but these were at the front of the car next of the radiator.

Top pic is the AC condensor, useless. Top left of the first pic and bottom pic is the st205 heat exchanger, again not easy to find and awesome.

You have some very good parts worth some good $ FYI.

Haha I hope people are able to see that as well. I am asking for people to make offers because I fear overpricing stuff and make people think I am trying to make big money off something worthless. I am, on the other hand trusting people to pay fair prices. But then again, I might be asking too much.

Nevertheless, thank you very much for the information.

where in LA are you as im not far from LA i would be interested in your driverside fender if the price is good.

I live five minutes away from the junction of the 10 and 605 freeways. Make me an offer.

Think you could try and get the bumper shipped overseas to PR?

Is this, Puerto Rico? If so, yes if I find a box large enough to figure out the shipping. It is relatively light so I don't think it will be that expensive to ship. I was really wanting to sell local, but we'll see. Let me figure out the weight in a box, if I find one.

Just a suggestion but I don't think you'll find a box big enough, however you might have success using multiple boxes taped together Let me know! USPS might take it since it's less than 70lbs, you'll have to check size restrictions for shipping by sea (Parcel Post) which is the most economical method.

All right, I will look at the boxes tomorrow that is my day off.

I'm interested in the pump. Or at the very least the bracket that is on it. Shoot me a PM with a price.

Hi, could you please make an offer?

[njccmd2002]

interested in the horns, would you take 15 shipped to 38305.. the two black horns on the front

[WannabeGT4]

$10 for the bracket that is connected to the pump. $40 for pump with bracket. I don't really need the pump as I already have one. I'd just like the bracket so it's easier to mount in the stock location. I'm talking about this one BTW:


This post has been edited by WannabeGT4: Aug 17, 2012 - 7:48 PM

[BonzaiCelica]

what the helll is wrong with you creating all these sepearte threads leading to your one thread??? your not gonna sell it faster, just be patient. wouldn't doubt if mods delete these.

[JohanFer]

what the helll is wrong with you creating all these sepearte threads leading to your one thread??? your not gonna sell it faster, just be patient. wouldn't doubt if mods delete these.

Not that I am not patient. I did think about it afterwards when I saw them. It was too late. I'll see about deleting them, otherwise, they will make us a favor.

[njccmd2002]

what the helll is wrong with you creating all these sepearte threads leading to your one thread??? your not gonna sell it faster, just be patient. wouldn't doubt if mods delete these.

dude chill, with the recent events and all spamming, it just felt right!!!!


would you take my offer on the horns?

free bump

[JohanFer]

what the helll is wrong with you creating all these sepearte threads leading to your one thread??? your not gonna sell it faster, just be patient. wouldn't doubt if mods delete these.

dude chill, with the recent events and all spamming, it just felt right!!!!


would you take my offer on the horns?

free bump

Yes!! Let's do it. I do need to tell you that I checked the horns today after I saw you message to see if they both work. I had to plug them in my car in place of the original and they both honked. Thir sounds are different, but sound much more muffled than the USDM stock. This could be due to my not successfully connecting earth n the car. I tell you this so you are aware, nevertheless, the sound is different.

Send me a pm with your PayPal address you that I can send you an invoice. Thanks!!!

This post has been edited by JohanFer: Aug 18, 2012 - 1:14 AM

[Syaoran]

All right, I will look at the boxes tomorrow that is my day off.

Alright, let me know, been searching for one but no cigar.

[6gcpr]

Im sorry are the fogs preface or not?

[JohanFer]

Im sorry are the fogs preface or not?

Sorry, they are post facelift.

[ricochet1490]

in the picture with the a/c condenser, there is a line that snakes back and forth, as if it is a small heat exchanger made of bent pipe. It's a power steering fluid line in case you were wondering.... mine is busted and took a shot on my clip. That's what I'm interested in if you think you can ship it.

[JohanFer]

I think I can ship it, I would be afraid to bend it so that it is flat, so the box might be bigger than what I would like, buy there wouldn't be any problem. How much are you willing to pay without shipping?

[ricochet1490]

Mine currently doesn't leak.... but I'd like to have it changed out....

I'd be interested at about 45 shipped... with the brackets if we could do that.

I don't care if the long parts of the lines have to get *gently* bent to fit in a smaller box, as long as I can move them back. I know shipping on a lot of this stuff isn't cheap though.... so we'll figure it out.

[WannabeGT4]

$10 for the bracket that is connected to the pump. $40 for pump with bracket. I don't really need the pump as I already have one. I'd just like the bracket so it's easier to mount in the stock location. I'm talking about this one BTW:

I made an offer if you didn't see it. Let me know yea or nay.

[Syaoran]

I think I can ship it, I would be afraid to bend it so that it is flat, so the box might be bigger than what I would like, buy there wouldn't be any problem. How much are you willing to pay without shipping?

Sending PM.

[njccmd2002]

i got a request on e-mail but its not showing on my paypal acct. so i dont want to do mobile thing,

pm me you paypal address please.

[JohanFer]

$10 for the bracket that is connected to the pump. $40 for pump with bracket. I don't really need the pump as I already have one. I'd just like the bracket so it's easier to mount in the stock location. I'm talking about this one BTW:

I made an offer if you didn't see it. Let me know yea or nay.

I really missed it. Yes, let's do the whole thing for $40 plus shipping. I will need to calculate shipping before anything else. I will be sending you a message with the actual quote.

[rave2n]

I'm assuming you kept the relay box, and relays for the IC pump, and FP?

And a quick FYI, that pump, and heat exchanger are worth a pretty penny. hard to find over here.

This post has been edited by rave2n: Aug 19, 2012 - 7:15 PM

[WannabeGT4]

$10 for the bracket that is connected to the pump. $40 for pump with bracket. I don't really need the pump as I already have one. I'd just like the bracket so it's easier to mount in the stock location. I'm talking about this one BTW:

I made an offer if you didn't see it. Let me know yea or nay.

I really missed it. Yes, let's do the whole thing for $40 plus shipping. I will need to calculate shipping before anything else. I will be sending you a message with the actual quote.

My zip code is 67207 to calculate shipping. Just PM me your PayPal info and I'll get you my address.

[JohanFer]

$10 for the bracket that is connected to the pump. $40 for pump with bracket. I don't really need the pump as I already have one. I'd just like the bracket so it's easier to mount in the stock location. I'm talking about this one BTW:

I made an offer if you didn't see it. Let me know yea or nay.

I really missed it. Yes, let's do the whole thing for $40 plus shipping. I will need to calculate shipping before anything else. I will be sending you a message with the actual quote.

My zip code is 67207 to calculate shipping. Just PM me your PayPal info and I'll get you my address.

Hey, what if I better send you the bracket like you wanted while I do more research on the pump and test if it works. Let me know. Thanks!!!

[WannabeGT4]

$10 for the bracket that is connected to the pump. $40 for pump with bracket. I don't really need the pump as I already have one. I'd just like the bracket so it's easier to mount in the stock location. I'm talking about this one BTW:

I made an offer if you didn't see it. Let me know yea or nay.

I really missed it. Yes, let's do the whole thing for $40 plus shipping. I will need to calculate shipping before anything else. I will be sending you a message with the actual quote.

My zip code is 67207 to calculate shipping. Just PM me your PayPal info and I'll get you my address.

Hey, what if I better send you the bracket like you wanted while I do more research on the pump and test if it works. Let me know. Thanks!!!

It's up to you. I'm not in a huge rush. If you have the hard lines and the hose I'd even offer a little more.

[JohanFer]

In that case, let me just send you the support you were talking about for your initial offer plus shipping. Thank you

[njccmd2002]

surprised nobody made an offer on the JDM lemon there.

[JohanFer]

surprised nobody made an offer on the JDM lemon there.

Haha I know, I can throw it in for free if you want.

[JohanFer]

Did I mention that these parts came from a WRC model? I was reading about the spray that this model has for the sub-radiator. They were installed inside the crash bar and I think I have them somewhere. I will look for them and post them if there is an interest.

[JohanFer]

Bump

[ricochet1490]

news on power steering line?

[Box]

So... This JDM lemon is free you say?

[JohanFer]

So... This JDM lemon is free you say?

Yes! Included in any order if you request it haha.

[JohanFer]

Bump for there is an update

[JohanFer]

Bump

[xs94st]

Is that the AC condenser for USDM or JDM? Is there a difference? Looking for one (USDM), willing to pick up if you have it.

[JohanFer]

Is that the AC condenser for USDM or JDM? Is there a difference? Looking for one (USDM), willing to pick up if you have it.

To tell the truth, I really don't know. I don't think so though because if it were different, I would have been told by the other members here.

[JohanFer]

Bumpy road ahead

[brk34]

Did you sell the front bumper yet?

[JohanFer]

Did you sell the front bumper yet?

No, it is still available!!!

[brk34]

Could you get an estimate on the shipping costs? I was thinking about 130USD before shipping.

This post has been edited by brk34: Sep 17, 2012 - 6:39 PM

[JohanFer]

Could you get an estimate on the shipping costs? I was thinking about 130USD before shipping.

Hi, I posted 150 picked up. I didn't really want to deliver, but if you like the price, I could research the price for shipping. Let me know.

[brk34]

Thanks anyway. With the cost of shipping to New York it will likely be too expensive for me.

[JohanFer]

Bump

[JohanFer]

Bump

[ricochet1490]

Did you get a brake master cylinder with this nose clip?

I need one.

[JohanFer]

Did you get a brake master cylinder with this nose clip?

I need one.

Sorry, but I did not get the whole front clip with the engine and all but just the very front of the bumper with the crash bar and a few items attached, the fenders and the hood. I really don't know where the master cylinder would be located, but if it is not in the very front, by the radiator, I probably didn't get it Good luck in your search.

[ricochet1490]

Did you get a brake master cylinder with this nose clip?

I need one.

Sorry, but I did not get the whole front clip with the engine and all but just the very front of the bumper with the crash bar and a few items attached, the fenders and the hood. I really don't know where the master cylinder would be located, but if it is not in the very front, by the radiator, I probably didn't get it Good luck in your search.

it would have been on the firewall of the car... so between the driver and the engine. Not attached to anything but the firewall, right behind the right side shock tower.

[JohanFer]

Did you get a brake master cylinder with this nose clip?

I need one.

Sorry, but I did not get the whole front clip with the engine and all but just the very front of the bumper with the crash bar and a few items attached, the fenders and the hood. I really don't know where the master cylinder would be located, but if it is not in the very front, by the radiator, I probably didn't get it Good luck in your search.

it would have been on the firewall of the car... so between the driver and the engine. Not attached to anything but the firewall, right behind the right side shock tower.

I see, unfortunately I didn't get that part. I wish I could help you.

[JohanFer]

Bump