FS 2 Gen II 3SGTE Good Shortblocks Scrapping Fri Mar 15 Options

[alltracman78]

I've got 2 US 3SGTE shortblocks FS, both are from Alltracs I've owned and wrecked. Both engines were pulled running in good condition. Both have roughly 170,000 miles on them. Both are unmodded and untouched [AFAIK], original bores, original pistons, ect. These were running engines but they've been sitting a few years so I suggest they be refreshed before slapping in the car.
One is from a 92 and one is from a 93.

Each one comes with the complete untouched short block. IIRC they both have the oil pump and rear main housing on them. They may or may not have small extras like the dipstick tube. They will not come with flywheel/clutch or harmonic balancer, timing belt gear, oil pan, ect.

$100 ea + shipping. Fri morning if no one's paid for these they're going with the rest of my scrap.
I'm not going to sell them for less because I still have to go to all the trouble of packageing these on a pallet and have them shipped ect.
I should have pics up tomorrow.

[alltracman78]

VIN plates are on both, as you can see in the pics; so US engines. You can still see the crosshatching in both as well, so the bores shouldn't be worn much.
There is a very small bit of rust on some of the cylinder walls. Nothing a rehone won't remove.

Engine 1





Engine 2

[95celgt]

Any idea what shipping should be like to 78045?

[alltracman78]

Sent you a PM

[Malhar95]

How much shipped to 77450?

[alltracman78]

How much shipped to 77450?

Off the top of my head ~ $400 to your house through UPS freight, if you have a business with a forklift it's gonna be ~ $300.
If you're still interested I'll get a more detailed quote.


One block is tentatively sold.

This post has been edited by alltracman78: Mar 13, 2013 - 10:53 PM

[alltracman78]

Both blocks tentatively sold.