Bolt on catback system!!!!, Made for st184-st205 Options

[DUHCHINKYAZN]

Does anyone know the fitment of this system for our cars? Just from looking at the photos it looks like it follows the same pipe bends as ours.

Anyone can confirm or clearify on this?

http://www.japspeed.co.uk/Toyota-Celica/Ex...em/p-25-72-470/

^^^^ link

[ILoveMySilly97]

First thing is that if you dont have a turbo then the exhaust pipe size is too big for a NA. The bends do look identical though. So it just depends on what you're running under the hood.

[DUHCHINKYAZN]

First thing is that if you dont have a turbo then the exhaust pipe size is too big for a NA. The bends do look identical though. So it just depends on what you're running under the hood.

Yeah i know its too big for N/A, but in the near future planning on a 3sgte. So i guess i could save some money now instead of buying an exhaust and running the piping size to suit the 5s

[nsxtypeR]

I wouldn't bet my money on it fitting a non 4wd celica. The rearend of 4wd cars is different from fwd. Those bends in the back go over the rear driveshafts. I'm not sure if the fwd have the same amount of space there

[trdproven]

I think the routing is a bit different from a 4wd to fwd because of the axle.

[6strngs]

You'd be much better off getting whatever muffler you like, then having the piping made at a muffler shop. If you really want it to be mandrel bent, hop on ebay and buy some pre-bent pipes then take it to the muffler shop. Guarantee it will be cheaper, and you will get exactly what you want.