Future FS: Full Intake Kits., Who's Interested? Options

[95celgt]

I'm in the process of producing Complete intake kits for Both GT and ST's.
They will have the following:
1. A mandarel-bent intake pipe-Chrome
2. A 2 1/2'' to 3" connector-(Throttle body to intake)
3. All the hose clamps
4. 2 Clear Blue vaccum hoses.
5. Cone air filter w/velocity stack.

There are two desighns im working on, both of which are identical to Injen designs I have seen.
1. S-bend
2. J-bend

Now right now I have finished the S intake and now i am going to finish the J intake(get it chromed). I will have finished both by the end of the week and will have pics by monday.

The full S intake kit will be around $100 and the J for $80.

Post if you are interested in seeing this go into production, sort of like a group buy.

You can post now if interested, you can always change your mind, i just need to see the number of people that want in.

Remember, these are identical to the Injen style but at more than half the price!

[bojangles_8686]

Why not make a cold air intake?

[95celgt]

The reason I havent made a cold air is because I cannot fabricate to a perfect fit like the short ram's.

My Celi was crashed before i bought it and the part of the body where the cold air would be passing through is mis-shaped so I could not guarantee a perfect fit like the short rams.

So inorder to make a cold air I would need a celi that is intact in that area.

Now, if you want a cold air that goes to the fender here is what I can do.

You can get the short ram now, then when I find a 6G that I can use I will try to make a seperate extension that connects to the S intake.
thats all i can think about for now

[subsolo_21]

I already have one, but its a great idea man. I'm glad somebody finally started making these for the celi. Thanx for the effort. I will say that mine has been well worth the money. Keep up the work.

[95celgt]

Thanks

Well when I got the Celi one of the first things I wanted to get for it was an intake.
So I was looking around and the Only one I found was the Injen for $230!

So now that I can I want to make them for the community so they don't pay for the overpriced Injen Intakes, which is what I almost did scince I found no other solution.

Just wait till u see the pics

[CBawlla]

I'm interested in purchasing one of these. I'm kind of new to cars and I've got a question. What is the difference between the "J" and the "S"?

[95celgt]

Ok, the J is mis more like an L, I just say J because I like it more than the letter L

It's more simple, comes out of the throttle body to the right then it curves downward, toward the radiator. The filter ends next to the distributor cap.

The S is similar but it bends once more to the right so thatthe filter is where the old air box was located.

[SpedToe169]

[NEVERSTOP]

I would like to see an intake built for the 3s swap into a 6gc.. have looked for a long time for a CAI for it and no luck

[subsolo_21]

[95celgt]

Yea that's possible, but is the pipe chrome
and you still need a filter after that.
My kit comes complete so that it is a direct bolt on, all that is needed it the removal of the stock tube and the airbox, slap this puppy on, and your set

Opps, sorry noticed u were talking about the 3S, thought you were putting down my efforts

This post has been edited by 95celgt: Jan 29, 2004 - 10:40 PM

[95celgt]

Neverstop, give me a pic of the engine bay, i'll see what i can do

Hey Spedtoe, what others are there?

This post has been edited by 95celgt: Jan 29, 2004 - 10:42 PM

[FallenHero]

[Exile04]

hey onc ei make mine cold air intake i would like to start making and selling them but im just havent gotten around to making mine yet.

[tim86]

im interested in this intake... lemme know I have a GT

[98celica3]

i think it's a damn good idea. i'm down for the "s" type if it is mandrell bent, or the pipe isn't crimped. let me know.
adam

[95celgt]

PRODUCTION IS READY TO BEGIN!

Final installation and fitting was done today!
Look for the new GROUP BUY topic!
I GOT PICS so u know what ur getting.

[R-03]

hey i would be interested in a CAI for the 3s swap. if you ever do manufacture some let me know. by the way, which part of s. texas are you from? i'm from s. texas also.

[95celgt]

Hey R-O3
Well im from Laredo, on the border

If you gan get me a pic of your engine i will see if i can make them.

[R-03]

i went to the border this past weekend. not laredo, but i've been there before. i went to weslaco, then to las flores. i live about 30 mi. south of san antonio. i don't have the engine in my car yet, need a few parts before i drop it in. but i will send you pics and measurements once it's done. that won't be for a few weeks though.