![]() |
![]() ![]() |
![]() |
![]() |
|
![]() Enthusiast Joined Nov 21, '13 From Netherlands Currently Offline Reputation: 0 (0%) ![]() |
I am looking for a pinout for the EA 1 connector (the big connector in the main fuse box) from the JDM ST205 or from the JDM ST202.
This is because I am doing an engine swap, 3s-gte into an european celica GT. ![]() I have the ST205 engine harness, but not the car harness. The engine runs with the two connectos connected, but for connecting the intercooler pump it would be nice to know which cables to use. ![]() ![]() These are the color markings on the wires, ST205 engine harness connector above, and ST202 main car haness bottom. ![]() |
![]() |
|
![]() Enthusiast Joined Nov 21, '13 From Netherlands Currently Offline Reputation: 0 (0%) ![]() |
After some resaerch this is what I have already found:
1 - INT from ECU -> what does this do? 2 - MTT -> intercooler pump 3 - Fuel Pump Resistor 4 - Ground 5 - Fan Relay 6 - Diagnosis 7 - Airco ? 8 - Unknown 9 - Not used on JDM ST202 and ST205, blue wire on Euro GT 10 - Unknown 11 - M+ -> intercooler pump 12 - M- -> intercooler pump 13 - Fuel pump resistor 14 - EFI Relay 15 - Dash connection ? Most important for me are the intercooler signals, the engine runs, only need to connect the intercooler pump. This post has been edited by SDTS: Nov 30, 2013 - 9:27 AM |
![]() ![]() |
Lo-Fi Version | Time is now: July 22nd, 2025 - 12:14 PM |