 Valve lash adjustment specs image |
  |
 Jan 26, 2014 - 2:49 PM
|
 
|
|
Enthusiast  Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%)  |
Here is the measurements guys. Does it look good? My mech said everything was within spec range but he also said tolerance is very wide for my engine (2.2 5sfe).
 .
This post has been edited by 6G96GT: Jan 26, 2014 - 2:50 PM |
|
Jan 26, 2014 - 11:38 PM
|
|
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
thats the clearance in inches?
if so, those are all on the loose side. That wont be a problem but it will tap. -------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
|
Jan 27, 2014 - 8:56 AM
|
|
|
Enthusiast Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%) |
Ah, I can just get bigger shims right?
What if I don't though and just let it be as is? Thanks for replying! |
|
Jan 27, 2014 - 9:19 AM
|
|
 Enthusiast Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) |
how is there just one clearance number for two different valves?
--------------------  1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
|
Jan 27, 2014 - 11:12 AM
|
|
|
Enthusiast Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%) |
I guess they were the same measurements.
QUOTE (Smaay @ Jan 26, 2014 - 11:38 PM)  thats the clearance in inches? if so, those are all on the loose side. That wont be a problem but it will tap. Do you know what the tolerances should be? |
|
Jan 27, 2014 - 4:18 PM
|
|
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
intake should be .007 to .011 and exhaust is .011 to .015
-------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
|
Jan 27, 2014 - 6:13 PM
|
|
|
Enthusiast Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%) |
Thanks again with the info. One more thing. I have colt cams installed. Does that make any difference on the clearances? Prolly not right?
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 18th, 2025 - 12:05 PM |