 Cusco Pillowball Mounts, ... something's missing |
  |
 Aug 26, 2014 - 2:28 PM
|
 
|
 Enthusiast  Joined Apr 18, '06 From Calgary, Canada Currently Offline Reputation: 37 (100%)  |
Hey guys,
I have a set of Cusco pillowball mounts (that were purchased used), and I've installed them with my Tokico Sustec Pro-I coilovers. The struts (when bolted to the mounts) "clunk" over the slightest bumps... and it makes me think that there is something missing between the mounts and the strut/spring assembly. I like the idea of being able to adjust my camber with these coilovers, but I'm VERY tempted to put the stock mounts back in just to drive in peace again.  Thoughts, or suggestions? I could snap some pics the next time I'm working on it if need be. TIA! -------------------- |
|
Aug 26, 2014 - 4:38 PM
|
|
 Enthusiast Joined Feb 23, '12 From Warrior, AL Currently Offline Reputation: 0 (0%) |
Usually springs have a rubberized coating or rubber sleeve where they make contact with the mounts. You should be able to come up with something that'll work to dampen the noise.
This post has been edited by Box: Aug 26, 2014 - 4:39 PM -------------------- 2001 Miata LS 5-speed
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 22nd, 2025 - 11:12 AM |