 Tranny Question |
  |
 Feb 18, 2004 - 7:19 PM
|
 
|
|
Enthusiast  Joined Jan 28, '04 From Hawaii Currently Offline Reputation: 0 (0%)  |
When I shift into 3rd gear there's a noise that sounds like it's grinding. Also, I can put it into 3rd gear without using the clutch. This only happens with 3rd gear though. I've checked my transmission fluid and its good. Any idea what's wrong?
|
|
Feb 18, 2004 - 7:26 PM
|
|
|
Enthusiast Joined Jan 9, '03 From St. Louis Currently Offline Reputation: 0 (0%) |
well, first of all, dont shift without clutch, it can be done with our cars, but, don't. it bad. and I think you might want to check your gearbox oil drained. they do it at places where you get your oilchanged, there are some little metal shavings that might be causing this, if I'm wrong, please someone correct me
good luck -------------------- [img]http://photos-081.facebook.com/n6/081/n15913038_30266081_3342.jpg[/img]
|
|
Feb 18, 2004 - 7:28 PM
|
|
||
|
Enthusiast Joined Jan 28, '04 From Hawaii Currently Offline Reputation: 0 (0%) |
I didnt shift without the clutch into 3rd intentionally. I was in second resting my hand on the shifter and I guess I applied a little pressure and it just went in. |
||
|
Feb 18, 2004 - 7:34 PM
|
|
|
Enthusiast Joined Jan 9, '03 From St. Louis Currently Offline Reputation: 0 (0%) |
ok... all I was saying, is try not to do it again. I've heard of doing that during a race, but its just not practical, to do it often.
-------------------- [img]http://photos-081.facebook.com/n6/081/n15913038_30266081_3342.jpg[/img]
|
|
Feb 18, 2004 - 7:36 PM
|
|
||
|
Enthusiast Joined Jan 28, '04 From Hawaii Currently Offline Reputation: 0 (0%) |
Alright thanks man. It's weird though how I dont have to use the clutch for only that gear and how it makes those grinding noises... |
||
|
Feb 18, 2004 - 10:36 PM
|
|
 Enthusiast Joined Aug 19, '03 From Buffalo,NY Currently Offline Reputation: 0 (0%) |
does it sould like almost a whilsting noise? If so i had the same problem the gear look leaked from the car.
|
|
Feb 19, 2004 - 1:00 AM
|
|
|
Enthusiast Joined Jan 22, '04 From bellingham, WA Currently Offline Reputation: 0 (0%) |
if it's a grinding noise... and it's there if you use the clutch or not... then you're syncro's are going out... probably due to you not using your clutch... my syncro's went out in my tranny and it had to be replaced....
toyota is known for having syncro's go out |
|
Feb 19, 2004 - 1:25 AM
|
|
|
Enthusiast Joined Jan 20, '04 From princeton, new jersey Currently Offline Reputation: 0 (0%) |
what you did into 3rd is power shifting....theres a point of slip inbetween all gears and like you said if you apply slight pressure to the shift knob and that point comes around you can pull it out and throw it into next gear...my friend does it when he's racing....i still don't know how he gets into into the next gear with our grinding....but the only time he ever uses the clutch is in 1st and reverse h's been doin it for about two years now....i'm totally boggeled by the fact
|
|
Feb 19, 2004 - 2:05 AM
|
|
||
|
Enthusiast Joined Jan 22, '04 From bellingham, WA Currently Offline Reputation: 0 (0%) |
you can pull out of gear w/o using the clutch at any point...... he slipped it INTO gear w/o using the clutch.... different story entirely |
||
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: September 2nd, 2025 - 5:25 AM |